"52 c 53 1 1/2 thomas"

Standard Punch Knockout Punch Kit Without Draw Studs, Capacity: 10 GA, (3.0 mm) Mild Steel, Hole Punches: 2-1/2" - 4", For Use With: the 746 Hydraulic Ram and LS100L.

Category: Knockout Punch Kits

Polaris Vision Tap™ Insulated Tap Connector, 2 Port (Dual Sided Entry), 350 MCM - 6 AWG, 600 Volt, Plastisol, Clear

Category: Dual Sided Entry Wire Connector Blocks

Non-Metallic, Tee Fitting, 2800 Series. Size: 2-7/8" Length, 7/8" Width. PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

15 Amp, 125 Volt, NEMA: 5-15R, Pole: 2, 3-Wire, Tamper-Resistant, Decora, Duplex Receptacle/Outlet, Straight Blade, Grounding, Quickwire Push-In & Side, Standards and Certifications: UL/CSA, Warranty: 2 Year Limited, NEC compliant - Ivory

Category: Tamper Resistant Residential Grade Receptacles

Eaton B-Line series box support fasteners, Wall studs, 1" Height, 1" Length, 1" Width, 0.049lbs, Length A: 2.5", Box support, Long leg box support, Pre-galvanized

Category: Metallic Box Supports

Conduit Body Gasket, Convertible Solid/Open Type, FM35 & FM85, 1-1/4 - 1-1/2 Inch, Composition Fiber

Category: Neoprene Conduit Body Gaskets

3 to 20V DC; Current: 0.05 to 3A (USB-A); 3 to 20V DC; Current: 0.05 to 5A (USB-C) Continuously Monitor Up to 1000 Hours of Voltage, Current, Capacity/Charge Delivered, Energy, and Resistance (Calculated), Tests Most Common Standard USB-A or USB-C Ports, Including Qualcomm Quick Charge® Ports

Category: Voltage & Continuity Testers

Panduct Wide Slot Wiring Duct, Type G, 1.26" W x 2.12" H x 6' L, Lead Free PVC, Gray, ***SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT***

Category: Standard Density Wire Duct

2-Pole, 600V, Power Pole for C30 Modular Style Lighting Contactor. Used in the Enclosed Units as extra poles. Can be used as N.O. or N.C.

Category: Lighting Contactor Power Poles

Power Bit, #2 Square Recess, Shockwave™, Length: 6"

Category: Square Head Insert / Power Bits

4-11/16" Square, Exposed Work Cover, Type: (1) Duplex Receptacle, 1/2" Raised, Drawn, Metallic. Cubic Inches: 10.3".

Category: 4-11/16" Square Metallic Box Covers

Terminal Strip, Wire Range: 22 - 10 AWG, 12 Circuits, 30 Amps, 600V, Center Spacing: .562", Terminal Screw Size: #8-32 Philsot.

Category: Terminal Strips

(3) 12 AWG Conductors and (1) 12 AWG Ground, NM-B, Purple (Some Remaining Yellow Inventory), Solid Copper Conductor, 90°C Insulation, 600V, 1000 ft. Package, Non-Metallic Sheathed Cable *** There is a current initiative among manufacturers for Purple to be the default color for 12/3 NM-B instead of the traditional Yellow. As inventories adjust, customers could receive either color. ***

Category: 12 AWG NM-B

Recessed Mount Magnetic Switch for Light Controllers, Form C (SPDT)

Category: Security Switch Magnets

2-1/2 Amp Pin Indicating Type Fuse, Dual-Element, Time-Delay, 125V

Category: Time Delay Midget Fuses

Homac CSB-250-2-S 1-Way 2-Outlet Encapsulated Multi-Tap Cable Block, Alum/Copper/Stranded Conductor, Alum

Category: Single Sided Entry Wire Connector Blocks

(1) 225 Amp Neutral Base for Ground Bars. ***(2) are needed for Ground Bar***

Category: Load Center Neutral Bases

Square Box, 21 Cubic Inches, 4 Inch Square x 1-1/2 Inch Deep, 1/2 Inch and 3/4 Inch Eccentric Knockouts, Galvanized Steel, Welded Construction, 10-1/2 Inch #12 AWG Solid Ground Wire Pigtail, For use with Conduit

Category: 4" Square Metallic Boxes

Grounding Bushing, 2 Inch, Threaded, Insulated, 105 Degree Celsius Rated, Zinc Die Cast, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

22.5 mm, Assembled Selector Switch, Non-Metallic, Knob Type, Black, Non-illuminated, 2-Position, 45° Throw, Operating Mode: Maintained, Maintained, 1 NO Contact, NEMA Rating: 1, 3R, 4, 4X, 12, 13.

Category: 22mm Knob Selector Switches

Applying A Clip Sleeve™ Wire Marker Is Simple With Our Special Quik-wand™ Applicator Included With Every Sleeve. Just Place The Flared Shoe End Ofthe Wand Against The Wire And Push Sleeve Onto The Wire. Split Sleeve With Chevron Locking Des

Category: Clip-On Wire Markers

4-Gang RFBA Floor Box, Standard 3.0” Depth – Steel Floor Box Designed For Above Grade Installations Features 4-Gangs of Box Capacity With At Least 2 ¾” Available Behind Device Plates, Fully Adjustable Before And After Concrete Pour, Designed For Carpet, Wood, Tile Terrazzo And Polished Concrete Applications, Above Grade, (x20 - 2" Knockouts), FloorPort Covers & Device Plates Sold Separately

Category: Recessed Compartment Boxes

20 Amp, 125/250 Volt, NEMA L14-20R, 3P, 4W, Locking Connector, Industrial Grade, Grounding, - Black-White.

Category: 20 Amp NEMA Twist Lock Connectors

15 Amp, 120 Volt, 2 ft. Cord Set, Molded-On NEMA Plug (5-15P) and Triple-Tap Connector (5-15R), Straight Blade, Automatic Reset GFCI Device, 12-3 SEOW Cord.

Category: In-Line GFCI Devices With Molded Plug & Triple Tap Connector