"tool-250"

Atomic 20V Max Brushless Cordless 1-3/4" Compact Bandsaw, 150 - 380 FPM, Includes: (1) DCS377 20V MAX* One-Handed Bandsaw, (1) 14/18 TPI Blade & (1) Blade Tracking Wrench ***Bare Tool Only, Battery & Charger Sold Separately***

Category: Cordless Heavy Duty Band Saws

W-Style Crimping Die. Die Type: W-164. For use with Service Entrance Connectors, C-Taps, H-Taps, Overhead and Underground Connectors. Require UAW Adapter when used w/ ECCXL Tools, and Requires CJD3, CJD3BG, or CJD30 Jaws when used w/ EK628L Tools.

Category: Wire Crimping Dies, Adapters, & Blades

Crimping Die, "U" Style, For Use With Service Entrance Connectors, C-Taps, H-Taps, Overhead and Underground Connectors, 12 Ton Tools, With EK1230L, EK1240L, HK1230, HK1240, RK1240, HKL1232, and E12CCX Tools, and RK1550 Equipped with 48802 Die Adapter

Category: Wire Crimping Dies, Adapters, & Blades

W-Style Crimping Die. Die Type: W-249. For use with Service Entrance Connectors, C-Taps, H-Taps, Overhead and Underground Connectors. Require UAW Adapter when used w/ ECCXL Tools, and Requires CJD3, CJD3BG, or CJD30 Jaws when used w/ EK628L Tools.

Category: Wire Crimping Dies, Adapters, & Blades

DIE SET 12 TON HYDRAULIC COMPRESSION TOOL

Category: Wire Crimping Dies, Adapters, & Blades

W-Style Crimping Die. Type: W-BG. For use with Service Entrance Connectors, C-Taps, H-Taps, Overhead and Underground Connectors. Require UAW Adapter when used w/ ECCXL Tools, and Requires CJD3, CJD3BG, or CJD30 Jaws when used w/ EK628L Tools.

Category: Wire Crimping Dies, Adapters, & Blades

Interval Timer, 30 Minute, Ivory Twist Knob, 20 Amp, 250 Volt AC, No Hold

Category: In-Wall Spring Wound Time Switches

TRACETone Tone Generator And Amplifier Probe Kit, Battery: (4) LR44 Button Cells (6 V), Battery Life: Generator: 100 HR, Amplified Probe: 12 HR, Voltage Rating: 250 V Peak DC Or 175 V RMS AC Externally Applied Without Damage, Tone Frequencies: 995 HZ And 845 HZ Alternating Tones (Plus/Minus 5 PCT), Tone Voltage: 12 V p-p No Load, New Battery, Tone Power (600 OHM): 8 DBM, New Battery, Includes: Alligator Clip With RJ11 Interface, Satin RJ11 Patchcord, For Testing Continuity And Located Signal Of Installed Wire And Cable

Category: Tone Generators & Probes

M18™ 1/4" Hex Impact Driver, Includes: (1) M18™ 1/4" Hex Impact Driver (2656-20) & (1) Belt Clip ***Bare Tool Only, Battery & Charger Sold Separately***

Category: Cordless Heavy Duty Drill Drivers

Inline Splice Kit, Cold Shrink, 25/28 kV, Shielded Cable, Insulation Range: 0.84 - 1.36", Wire Range: 1 AWG - 250 MCM.

Category: Medium Voltage Cold Shrink Splice Kits

Inline Splice Kit, Cold Shrink, 25/28 kV, Shielded Cable, Conductor Range: 250 MCM - 750 MCM. Cable Insulation Range Size: 1.07" - 1.70", Connector Requirements: Minimum O.D.: 0.75", Maximum O.D.: 1.70", Maximum Length: AL/CU 5.75", Copper: 6.50".

Category: Medium Voltage Cold Shrink Splice Kits

Fence Clamp, One Conductor, 1 1/2" Fence Post, 2/0 Solid-250 kcmil Stranded, 50 mm² Stranded-120 mm² Stranded

Category: U-Bolt Ground Clamps

Provides a path to ground for lightning currents. Stranded Conductor, Copper, Tinned, Ropelay, 250', 115.08 kcmil.

Category: Bare Stranded Copper Wire

Cold Shrink, Connector Insulators, Shielded Cable, 1 kV, Conductor Range: 250 MCM - 400 MCM, Insulation Diameter Range: 0.69" - 1.38", Relaxed Tube Length: 12.0". For use with all Solid Dielectirc (rubber and plastic) insulated wires and cable under 1000 Volts in Indoor, Outdoor, Direct Burial and Submersible Applications. ***Counter Display Package***

Category: Low Voltage Cold Shrink Connector Insulators

Heat Shrink Cable Sleeve, Heavy-Wall, 250 - 750 MCM, Black, 25' Reel, 2" Expanded I.D., .65" Recovered I.D.

Category: Heavy Wall Heat Shrink

50 Amp, 3-Pole Series C NEMA F-Frame Molded Case Circuit Breaker, Type FDB, Cable In/Cable Out, 14 kAIC, 600 VAC, 250 VDC, Fixed Thermal-Magnetic Trip. Includes: Load Terminals only.

Category: 600V Rated Molded Case Circuit Breakers

Breaker, Molded Case, Terminal Lugs, T5 Frame, 3/0 AWG - 250 MCM

Category: Molded Case Circuit Breaker Lug Kits

35 Amp, 3-Pole Series C NEMA F-Frame Molded Case Circuit Breaker, Type FDB, Cable In/Cable Out, 14 kAIC, 600 VAC, 250 VDC, Fixed Thermal-Magnetic Trip. Includes: Load Terminals only.

Category: 600V Rated Molded Case Circuit Breakers

Series C NEMA J-frame Molded Case Circuit Breaker, Type Jd, Cable In/cable Out,3-pole, 250 Amp, 600 Vac, 250 Vdc, Adjustable Thermal-magnetic Trip, Shunt Trip110-240 Vac Or 110-125 Vdc

Category: 600V Rated Molded Case Circuit Breakers

Eaton Heavy duty double-throw non-fused safety switch, 400 A, NEMA 4X, Stainless steel, Non-fusible, Three-pole, Three-wire, 600 Vac, 250 Vdc

Category: 3-Pole 600 Volt Non-Fused Double Throw Safety Switches

225 Amp, 3-Pole Series C NEMA F-Frame Molded Case Switch, Type FD, Cable In/Cable Out, 35 kAIC, 600 VAC, 250 VDC, Fixed Thermal-Magnetic Trip. Includes: Load Terminals only.

Category: 600V Rated Molded Case Circuit Breakers

225 Amp, 3-Pole Series C NEMA K-Frame Molded Case Circuit Breaker, Type KD, Cable In/Cable Out, 35 kAIC, 600 VAC, 250 VDC, Fixed Thermal-Magnetic Trip. Includes: Standard Line and Load Terminals.

Category: 600V Rated Molded Case Circuit Breakers

ABB AF116-30-00-13

Category: IEC Contactors - 66-Over Amp

Lightweight Knee Pad Sleeves Can Be Worn Under or Over Pants for All Day Wear, Flexible EVA Knee Pad Contours To Leg Shape for Seamless Comfort, Unique Design Keeps Knee Pads Close to the Body for a Second-Skin Fit Allowing for Agility When Working in Tight Spaces, Lightweight, Breathable Mesh Back to Keep You Cool and Comfortable, Elastic Cuff With Slip-Resistant Silicone Helps Knee Pads Stay in Place, Perfect For the Jobsite and Weekend Tasks, Sold in Pairs

Category: Knee Pads