"1/4" beam clamps"

Flextray Attachment Clip, 1.5" x 2" x 2", Pre-Galvanized Zinc

Category: Strut-to-Beam Clamps

Photoelectric Sensor, Comet Series, Thru-Beam, Source, 20 foot (6 m) Sensing Range, Infrared Beam, 20-264 VAC, 15-30 VDC, 6 Ft. Cable Connection, Right-Angle Viewing. Polyurethane Housing. NEMA Rating: 4X, 6. Used with 20 foot Detectors

Category: Normal Duty Photoelectric Thru-Beam Sources

3-Gang, Nail-On, Switch/Outlet Box, Thermoset Fiberglass, Depth: 3". Cubic Inches: 46.0". Includes: Clamps.

Category: Non-Metallic New Work Switch / Outlet Boxes

Rebar Ground Clamp, Rebar Size: #5, Diameter: 5/8 Inch, 6 to 2/0 AWG, Bronze

Category: Rebar Ground Clamps

Permaground Brass Ground Clamp, Conductor Range 2-10, Pipe Sizes 1/2 to 1in

Category: Bare Wire Ground Clamps

Ground Rod Connector, 3/8" Pipe Size, 10-4 Wire Size, Silicon Bronze, 0.375" Length

Category: Ground Rod Ground Clamps

4" Square Cover, 0-Device, Cover, No Raise, Drawn, Metallic.

Category: 4" Square Metallic Box Covers

Press-On Lug, Copper, Type CCT, Run Conductor Diameter Range: .258 - .292", Run Conductor Range: 2 Solid - 2 Stranded, Tap Conductor Range: 8 Solid - 4 Stranded. Tap Conductor Diameter Range: .128 - .232".

Category: C-Tap Press-On Lugs

CONDUIT TO ROD/WIRE CLIP 1IN-1-1/4IN EMT

Category: Conduit Hangers From Wire/Rod & Beam

J-Hook, Beam Clamp, Diameter: 3/4 Inch, Flange: 1/8 - 1/2 Inch, Steel

Category: J-Hook From Wire/Rod & Beam

Miniature Feed Through Terminal Block. Compression Clamp. Type: DR 4/6.1. Color: Gray. 250V/20A. Size: 4 mm Block, 6 mm Spacing. DIN 2. Wire Size: 18 - 12 AWG.

Category: 4mm Miniature Feed Through Terminal Blocks

Beam Clamp, 1/4-20 Rod, Threaded Mounting, Malleable Iron, Electro Plated, 400 LB Load

Category: Beam Clamps - Adjustable

Conduit Hanger with Bolts, #2-1/2B Trade Size, 1-1/4 Inch EMT Size, Steel/Zinc

Category: Conduit Clamps

3-Gang, Nail-On, Switch/Outlet Box with Speed Clamps, Thermoset Fiberglass, Depth: 3 9/16". Cubic Inches: 56.5".

Category: Non-Metallic New Work Switch / Outlet Boxes

Parallel Beam Clamp, 1-1/4 Inch, Material: Ferrous Metal, PVC Coated

Category: PVC Coated Parallel Beam Clamps

Beam Clamp, 1 Inch, Threaded Rod Size: 1/4-20, Malleable Iron

Category: Beam Clamps - Adjustable

7.5 Watt LED Directional Retrofit Downlight - Gimbaled; 4 in.; Adjustable Color Temperature; 60 deg. Beam Angle; 120 Volt

Category: 4" Recessed LED Downlights

Photoelectric Sensor, Comet Series, Perfect Prox Background Rejection, 9 inch (225 mm) Sensing Range, Infrared Beam, VAC, 10-30 VDC, 4-Pin Micro AC Connector, AC Operation: VMOS (bi-directional) Output, DC Operation: 4-Pin Micro DC Connector, NPN and PNP Output. Polyurethane Housing. NEMA Rating: 4X, 6. Used to detect Metallic or Non-metallic objects and ignore background conditions.

Category: Normal Duty Background Rejection Photoelectric Sensors

Eaton B-Line series box support fasteners, Wall studs, 1" Height, 1" Length, 1" Width, 0.049lbs, Length A: 2.5", Box support, Long leg box support, Pre-galvanized

Category: Metallic Box Supports

NM cable connector zinc die-cast. 2 screw clamp type. Handles combinations of NM cable from #14 to #10. Up to 3 NM cables at one time. 3/4 Knockout. Also handles one 8/2, two 4/2 service cable Snap tight

Category: Zinc Die Cast NM Cable Connectors

4" In-Line Fan Kit, Includes: (2) 4" Double Inlet Grilles, (2) Back Draft Dampers, (20) Clamps, Zip Ties, Y-Adapter

Category: In-Line Fan Kits

Hammer On Flange Clip, Side Mount, 1/8” - 1/4” Flange

Category: Flange-Mount Cable/Conduit Clips

Conduit Clip, Conduit to T-Grid, Size: 1/2" Inch to 3/4 Inch, Material: Steel.

Category: Acoustical T-Grid Ceiling Electrical Component Supports

Conduit to Conduit Clip, Push In, EMT Conduit Size: 1/2 Inch to 1 Inch, Rigid Conduit Size: 1/2 Inch to 3/4 Inch, Material: Steel, Load Limit: 25 lbs. Standard Packaging Quantity: 100.

Category: Conduit Clips