"steel staples nm"

Hole Seal, for 2" Conduit. Gasketed, Oil Tight, Size/Dims: 3" Diameter, Material/Finish: Steel/Light Gray

Category: Painted Steel Enclosure Hole Seals

Knockout Seal, 1 Inch, Snap-In, Steel

Category: Steel Knockout Seals

TS 8 Baying Systems, Carbon Steel, Mill Finish

Category: Indoor Free Standing Data, Audio, & Video Enclosures

TS 8 Baying Systems, Sheet Steel, Dipcoat-Primed - Door, Roof and Rear Panel

Category: Indoor Free Standing Data, Audio, & Video Enclosures

Parallel Beam Clamp, Stainless Steel, 3/4"

Category: Beam Clamps - Adjustable

Weatherproof Cover, 1-Gang, Horizontal Mount, Non-Metallic, Features: Bug Plug, (1) Standard Duplex & (1) Standard GFCI Face Plate, (1) Nm Cable Connector, In-place, Disposable Mud Cover, Dimensions: 4.0 Inch X 5.685 Inch X 2.94 Inch.

Category: 1-Gang Non-Metallic Weatherproof Box Covers

For right angle turns on same surface. Maintains 1 1/4" (32mm) bend radius when installing UTP and fiber optic cable. White

Category: 1-Piece Non-Metallic Raceway Elbows

Weatherproof Cover, 1-Gang, Vertical, Type: Blank, Galvanized Steel With Polyethylene Gasket

Category: 1-Gang Metallic Weatherproof Box Covers

Enclosure, NEMA 4X, Type: Concept, Hinge Cover, 36 x 30 x 12 Inch, Wall Mount, Stainless Steel

Category: Stainless Steel Wall Mount Enclosures

Reducing Washer, Steel, 2" x 1-1/2"

Category: Reducing Washers

COUPLING 3/4IN TRADE SIZE 304

Category: Stainless Steel Rigid Conduit Couplings

LTB30/90 1 1/2INX90D NM ELBOW GREY KWIKFLEX

Category: 90 Degree Non-Metallic Liquidtight Flex Connectors

LTS25 1 1/4IN NM STRAIGHT FITTING LIQUIDTIGHT GREY KWIKFLEX

Category: Straight Non-Metallic Liquidtight Flex Connectors

4 Inch Square Cover, 2-Device, Mud Ring, 2 Inch Raised, Drawn, Metallic, Cubic Inches: 25.5

Category: 4" Square Metallic Box Mud Rings

Round Cover, Ceiling Cover Plate, Flat, Diameter: 5-1/4 Inch, Adjustable Strap and Screws For 3 and 4 Inch Outlet Boxes, Steel

Category: Metallic Ceiling Box Covers

Service Drop Grip, Single Eye, Single Weave, Light Duty, Closed Mesh, Length: 3.75 Inch, Cable Range: .23 to .31 Inch, Stainless Steel

Category: Closed Mesh Single U Eye Support Grips

THB LT 893 1CONN 90D LT FLEX

Category: 90 Degree Non-Metallic Liquidtight Flex Connectors

Eaton Crouse-Hinds series DS GFI receptacle cover, Sheet steel, Surface mount, Single-gang, For GFI receptacles

Category: Steel FS & FD Device Box Covers

Hyshed Hinge Cover Enclosure, Wall Mount, NEMA 4X, 15 Degree Slope Top, 16 x 16 x 8 Inch, Stainless Steel, Rated For Sanitary Washdown Cleaning Procedures.

Category: Stainless Steel Wall Mount Enclosures

Panel For Junction Box, 30 Inch x 30 Inch, Material: Steel, Finish: Conductive

Category: Enclosure Back Panels

Lay-In NEMA Type 12 Hinged-Cover Wireway, Straight Section, Gasketed, Size: 2-1/2 Inch Width, 2-1/2 Inch Depth, 4 Foot Length, 14 Gauge Steel, ANSI 61 Gray Polyester Powder Finish, No Knockouts.

Category: Hinged Cover Wireway

Wall Mount Enclosure, NEMA 3R, 4, 12 & 13, Continuous Hinge Cover With Clamps, 30 x 24 x 6 Inch, Steel With Gray Powder Coat Finish

Category: NEMA 12 / 13 Wall Mount Enclosures

Solid Strut, 1-5/8" Wide x 1-5/8" x 20', Steel, Pre-Galvanized

Category: Steel Solid Strut

Drip-Shield Screw-Cover, Type 3R is used as a wiring or junction box in outdoor applications. This Screw-Cover Drip-Shield Type 3R no Knockouts, A18R1812NK item measures 18x18x12 inches with a material of Steel colored Gray.

Category: NEMA 3R Screw Cover Enclosures