"phj-9100a9blk formula systems north america inc"

VJ 606 NON-METALLIC MOUNTING PLATE

RVJ 1614 W/ RAISED COVER / 4 CORNER SCREWS

VM 754 W/ OPAQUE COVER / KNOCKOUTS

VM755 PB SCRWCVR 30X4 VALOX

VM 754 W/ OPAQUE COVER

VJB 806 W/ BONDED WINDOW / HINGE / 2 CORNER SCREWS

ENG CVJ606HWLL1 CVJ 606 W/ CLEAR FRONT / HINGE / 1 TWIST LATCH

ENG CVJ1210NHWPL2 CVJ 1210 W/ CLEAR

AMERICAN LIGHTING HTL-TW-12V 16.4FT 2.2W PER FT-280LM PER FT

CAD B102GGOL 3/8" X 1-1/2"

Welding Tray

Provides a path to ground for lightning currents. Stranded Conductor, Copper, Tinned, Smooth Weave, 250', 65.6 kcmil.

Welding Material, Cadweld Plus,#32,f33, Cathodic

Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL) and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes adapters to accept eight (8) Ortronics TracJack modular jacks, four (4) Ortronics Series II modular jacks, or Wiremold Open System adapters. Modular jacks sold separately. NOTE:

Category: Poke-Through Cover Assemblies

Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL) and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes adapters to accept eight (8) Ortronics TracJack modular jacks, four (4) Ortronics Series II modular jacks, or Wiremold Open System adapters. Modular jacks sold separately. NOTE:

Category: Poke-Through Cover Assemblies

EPR Cable End Stripper, Cable O.D.: .50" - 3", Material: Aluminum, Steel, Length: 8"

Category: Power Cable Strippers

All communication device accepts up to eight UTP, fiber optic, audio, or video connectors. Finish with a brushed aluminum and a black device plate. Includes adapters to accept eight (8) Ortronics TracJack modular jacks, four (4) Ortronics Series II modular jacks, or Wiremold Open System adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AMD8 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Finish - Anodized Aluminum

Category: Assembled Poke-Through Units

Duplex Receptacle, Half Controlled, LED Indicator, 20A, 125V, White

Category: Radio Frequency Area Lighting Controllers

Modular Wall Plate Ring - White

Category: Multimedia Outlet System Wallplate Inserts

15-AMP WHITE HALF CONTROLLEDRECEPTACLE

Category: Radio Frequency Area Lighting Controllers

For use with 2400D-2N. Allows both power and low voltage at a single point-of-use. Accepts 5507 Series Faceplates, Ortronics TracJack and Series II Modules (requires S2-EPL Plate), Pass and Seymour Activate Series Inserts (requires CM-EPLA Plate), and Wiremold Open System Communication Modules (requires CM-EPLA Plate). Fog White

Category: Communication Module End Plates For Metallic Raceway

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type T Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type T Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type X Conduit Bodies