Search results

BODINE BHD65UCR ELECTRONIC EMERGENCY BALLAST WITH BACKUP BATTERY AND CHARG ER; 17-250W INPUT VOLTAGE: 1 20/277V 90 MINUTE ILLUMINATIO N TIME;24 HR RECHARGE. LUMENS : 300-750 HAZARDOUS LOCATION REPLACMENT ONLY

CF94GU. Our CF94GU is UL component recognized for factory installation only. Therefore, it is only sold directly to lighting fixture manufacturers for installation in their fixtures at their factory. However, if your inquiry is for replacement only (not a new installation), we can accept a replacement order. The order MUST be marked as “Replacement only”. THE CF94GU IS AVAILABLE IN VARIOUS BATTERY CONFIGURATIONS. PLEASE REVIEW THE ATTACHED .PDF CUT SHEET LINK TO SPECIFY THE BATTERY STYLE NEEDED. THE BATTERY CONFIGURATIONS ARE SHOWN AT THE BOTTOM OF PAGE 2 ON THE ATTACHED SPEC.

BOD BSL06T3UAK55PKI2 ABCONNEC

BOD BSL-310M2W EM LED DRIVER

Emergency LED DriverBODINE BSL310LP FIELD INSTALLED EMB

Category: LED Driver Emergency Power Supplies

Emergency LED Driver Listed for Field Installation, Universal Input Voltage 120-277 Volt AC, 20 Watts Output Power

Category: LED Driver Emergency Power Supplies

10 Watt Emergency Driver for Linear LED Strips, 120-277 Volt, 90 Minute Illumination Time

Category: LED Driver Emergency Power Supplies

LED 15W Phase-Cut Dimmable Inverter w/Emergency B/U: Metal housing with Conduit; 120 through 277v, Max output: 12.5va into load, 15.34" L x 2.25" W x 1.16" H. Compatible with dimmable Type -B TLED Lamps (up to 15w). • With the phase-cut dimming capability, it allows a lighting load with up to a 15W maximum input power to be dimmed to a 12.5VA maximum emergency output power. Philips PTB015B2UK45C1PDI1. 12NC 913702489501 / PEL00033P. *AKA: Bodine p/n BTB015B2UK45C1PDI1, 12NC 913702489301 / UPC #663015112283.

Category: LED Driver Emergency Power Supplies

BOD BSL20 HV Emergency LED Driver, 0.16A-0.10A, 125V-200V

Category: LED Driver Emergency Power Supplies

LED Emergency Driver - Input Voltage: 120-277V AC. Operates an LED Load of up to 7.5W (30- 130VDC) for a minimum of 90 minutes. Listed to UL924 and tested to CSA 22.2, No. 141 Field or factory installation (Indoor/Damp).

Category: LED Driver Emergency Power Supplies

Emergency LED Driver, 20 Watt Constant Output Power, 1A-0.40A 20V-50V (Class 2)

Category: LED Driver Emergency Power Supplies

LED Emergency Driver. Input Voltage: 120/277 Volts AC, 60Hz. Output Voltage: 120/277 VAC, 60Hz. Maximum Load Power (including AC ballast/driver): 400 VA. SINE WAVE Emergency Lighting inverter with Dimming Capabilities

Category: LED Driver Emergency Power Supplies

LED Emergency Driver (Flat Battery Option) - Input Voltage: 120-277V AC. Operates an LED Load of Up to 23.1 W at Nominal Battery Voltage for a Minimum of 90 Minutes. UL Recognized Factory Installation (Indoor and Damp) Output Class 2 Compliant. ### FOR REPLACEMENT USE ONLY ###

Category: LED Driver Emergency Power Supplies

LED 15W Phase-Cut Dimmable Inverter w/Emergency B/U: Metal housing with no conduit; 120 through 277v, Max output: 12.5va into load, 15.34" L x 2.25" W x 1.16" H, 12NC 913702489401 / PEL00032P. Compatible with dimmable Type -B TLED Lamps (up to 15w). • With the phase-cut dimming capability, it allows a lighting load with up to a 15W maximum input power to be dimmed to a 12.5VA maximum emergency output power. *Philips 12NC 913702489401- PTB015B2UK45L1PDI1.

Category: LED Driver Emergency Power Supplies

EMERGENCY LED DRIVER

Category: Screw Base Miniature Incandescent Lamps

Electronic Emergency Ballast with Backup Battery and Charger, Input Voltage: 120/277 Volt, 1000-3500 Lumens Initial Light Output, 32-215 Watt

Category: Emergency Fluorescent Ballasts

BOD USE #0447525

BODINE 2W-ITS REPL FOR BSL310

BOD BSL26

BOD BSL6LSTM

BODINE 10W REMOTE EMER. BATTR

BOD BDL60UREDM

BOD BSL06M5UAK55BSI1 TITLE 20

BOD BSL14B2UAK55C1I1