Softstarters & Accessories

PSR SSTR 600V/24V AC/DC 15.2A

Category: Basic Control Softstarters

Panel Mounting Kit, 8 Ft. Cable, Used With It Control Interface Module

Category: Softstarter Interface Modules

65mm, 37a Soft Str. W/ss Status LED & Spec. Feat. Cim (pump)

Category: Advanced Control Softstarters

Softstarter for Max 600V Main Voltage, 100-250V 50/60Hz Control Supply Voltage

Category: Advanced Control Softstarters

Abb; Softstarter; Voltage Rating: 208 - 600 Vac; Amperage Rating: 60 Amp; Wattage: 15 Kw At 230 V, 30 Kw At 400 V, 37 Kw At 500 V; Power Supply: 100 - 240 Vac;connection: Screw Terminal; Operating Temperature: -25 To +60 Deg C; Frequency Rating: 50/60 Hz; Starting Capacity At Maximum Rated Current Ie: 240 Amp For 6 S;service Factor Percentage: 100 Pct; Ramp Time: For Start: 1 - 10 S, Stop: 0 - 20s; Tightening Torque: Main Circuit: 8 N-m, Supply Circuit: 0.6 N-m, Control Circuit: 0.6 N-m; Signal Indication Of Ramp(led): Green; Number Of Starts Per Hour:10 At 3.5 X Ie For 7 S 50 Pct On Time 50 Pct Off Time; Connecting Capacity: Maincircuit: (1) 10 - 35 Sq-mm/(2) 6 - 16 Sq-mm Rigid, Control And Supply Circuit: (1) 0.75 - 2.5 Sq-mm/(2) 0.75 - 1.5 Sq-mm Rigid; Storage Temperature: -40 To +70deg C; Communication: Filed Bus Plug (optional)

Category: Basic Control Softstarters

IT Soft Starter Accessory, Terminal kit, #16-50 kcmil, 2 cable connections, Frame T,U

Category: Softstarter Lug Kits

Soft Starter, 200 mm, 180 Amp, T-Frame, 3-Pole, 24 Volt DC Power, 200 - 600 Volt AC Operating Voltage, 47 - 63 Hz, 1 - 2 Conductors, #5 AWG - 500 kcmil Wire, 120 Volt DC, 240 Volt AC, CIM, 3-Phase Motors, Modbus RTU, NEMA 0, LCD Display, -30°C to -50°C

Category: Advanced Control Softstarters

PSE Series Softstart (Compact Style.) Motor Voltage: 208V-600V AC. Control Voltage: 120V-240V AC. Normal Duty: 18 FLA (Full Load Amps). Heavy Duty: 11 FLA (Full Load Amps). Screw Mount. Includes: Digital Keypad, Optional FieldBus Communication, Overload Protection and By-Pass.

Category: Advanced Control Softstarters

Soft Starter, 304 Amp, 600 Volt AC, Frame Size T, Solid State

Category: Advanced Control Softstarters

DS7 Series Soft Start Controller. 3.7 Amp. Motor Voltage: 230V - 460V AC. Control Voltage: 24V AC/DC. Requires: Overload Protection and Panel Mounting Adapter for Overload.

Category: Basic Control Softstarters

S811 Series Communicating Softstarter. Control Voltage: 24V DC. Load Voltage: 230 - 440V AC, 42-135 Amp, Non-Combination. 30-Second Ramp, 4 Starts per Hour, 450% Current Limit @ 40 Degrees Celcius. Hp Ratings: 30 @ 230V, 55 @ 380-400V, 59 @ 440V. Includes: Internal Solid-State Overload Protection, Run Bypass Mode and Lugs. ***Must use C-H Power Supply***

Category: Advanced Control Softstarters

S811+ Soft Starter, 180A, T-frame, Premium, 600V rated, Level/Edge Sense, Three-pole, 24V power, 47-63 Hz, 1-2 conductors, #3 AWG to 500 kcmil wire, 120 Vdc, 240 Vac, Modbus RTU, NEMA 0, LCD display, -30 C to -50 C

Category: Advanced Control Softstarters

Soft Starter, S811+, 290 mm, 720 Amp, Pump Control with OPT Inside Delta

Category: Advanced Control Softstarters

The softstarter PSTX37-600-70 has a rated maximum operational current of 37 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard.

Category: Advanced Control Softstarters

DS7 Series Soft Start Controller. 32 Amp. Motor Voltage: 230V - 460V AC. Control Voltage: 24V AC/DC. Requires: Overload Protection and Panel Mounting Adapter for Overload.

Category: Basic Control Softstarters

DS7 Series Soft Start Controller. 22 Amp. Motor Voltage: 230V - 460V AC. Control Voltage: 24V AC/DC. Requires: Overload Protection and Panel Mounting Adapter for Overload.

Category: Basic Control Softstarters

DS7 Series Soft Start Controller. 6.9 Amp. Motor Voltage: 230V - 460V AC. Control Voltage: 24V AC/DC. Requires: Overload Protection and Panel Mounting Adapter for Overload.

Category: Basic Control Softstarters

PSTX30-690-70 Softstarter For Max 690V Main Voltage & 100 - 250V 50/60Hz Control Supply Voltage IEC Maximum of 30A, 6 Inch Width, 12.36 Inch Height, 8 Inch Depth

Category: Advanced Control Softstarters

C-H S801+T24N3S MOTOR CONTROL

Category: Advanced Control Softstarters

PSR Series Softstart (Compact style). 104 FLA (Full Load Amps). Motor Voltage: 208V - 600V AC. Control Voltage: 120V - 240V AC. Din-Rail/Screw Mountable. Requires: TA75 Series Overload Protection & DB80 Series Mounting Kit.

Category: Basic Control Softstarters

S811 Open Soft Starter, Premium, Rating: 20-66a, 18.5 Kw At 230v, 30 Kw At 380-400v, 37 Kw At 440v, N-frame, 30 Second Ramp Or 450percent Current Limit At 50 C, Inside-the-delta Connection, Pump Control And Extended Ramp Functions

Category: Advanced Control Softstarters

C-H S811+T30P3S MOTOR CONTROL

Category: Advanced Control Softstarters

C-H S801+V72N3S SOFT STARTER

Category: Advanced Control Softstarters

Terminal Enlargement, 3-Pole, For use with AF116-AF146 Contactors

Category: Softstarter Terminal Enlargements