Raceway Boxes - 1-Gang

3-sided hanging box. Mounts standard electrical outlets or communication devices with either NEMA standard single gang screw-on or Panduit snap-on faceplates. When used with TGDW divider wall, box separates and fully encloses device to provide cabling separation.

Category: 1-Gang Raceway Device Boxes

Non-Metallic, 1-Gang, Deep Device Box, 2300 Series. Size: 4-3/4" Length, 3" Width, 1-3/4" Depth. PVC, White.

Category: 1-Gang Raceway Device Boxes

Steel, 1-Gang, Duplex Receptacle Cover, 3000 Series. 5-3/8" Length, Gray.

Category: 1-Gang Raceway Box Covers & Faceplates

Single Receptacle Plate, 3000 Series Raceway, Steel, Ivory

Category: 1-Gang Raceway Box Covers & Faceplates

Steel, 1-Gang, Deep Device Box, 2400 Series, Dual-Channel, Size: 4-5/8" Length, 2-7/8" Width, 1-3/4" Depth. Includes: 1/2" Trade Size KOs, Flush Wall Box, Color: White.

Category: 1-Gang Raceway Device Boxes

Single Gang Two-Piece Screw Together Deep Outlet Box, Use with Pan-Way T-45, LD2P10, or LD Profile Raceways. Length: 5.2 Inch, Width: 3.5 Inch, Height: 2.8 Inch, Off-White

Category: 1-Gang Raceway Device Boxes

Aluminum, 1-Gang, Deep Device Box, AL Series. Size: 2-1/2" Depth, 4-5/8" Length, 4-27/32" Width. For Receptacles and Deep Devices.

Category: 1-Gang Raceway Device Boxes

WMD 5507S-WH NM SPACER 5500 W

Category: 1-Gang Raceway Box Covers & Faceplates

For covering single receptacles - 1.41" (36mm) diameter. Ivory

Category: 1-Gang Raceway Box Covers & Faceplates

Installs commercially available 15A and 20A rectangular receptacles into 3000 Series Raceway. G3007C Device Bracket included. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Ivory

Category: 1-Gang Raceway Device Brackets & Plates

WMD 5507MAAP-WH 5507 PLATE WI

Category: 1-Gang Raceway Box Covers & Faceplates

Single gang two-piece screw together deep outlet box. Box accepts Pan-Way« Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way« T-45, LD2P10 (when used with JBD1), or LD profile raceway. 5.19in L x 3.45in W x 2.75in H (131.9mm x 87.7mm x 69.8mm). Breakouts for 1/2in, 3/4in, or 1in diameter conduit, White.

Category: 1-Gang Raceway Device Boxes

For mounting Ortronics datacom inserts. Accepts four TracJack devices. White

Category: 1-Gang Raceway Box Covers & Faceplates

Single gang one-piece deep outlet box with adhesive backing. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.23in L x 3.48in W x 2.75in H (133.0mm x 88.5mm x 69.8mm). Breakou

Category: 1-Gang Raceway Device Boxes

T70 GFCI 3-sided hanging box. Accepts single gang U.S. GFCI (ground fault circuit interrupter) standard electrical devices. Provides increased internal area for connections and excess wire.

Category: 1-Gang Raceway Device Boxes

For mounting three CM2 Series modules or Pass and Seymour Activate Series devices modules. Ivory

Category: 1-Gang Raceway Device Brackets & Plates

For covering duplex style devices. Accepts 106 Frame. Gray

Category: 1-Gang Raceway Box Covers & Faceplates

Non-Metallic, Switch Faceplate, 5500 Series. Size: 4-1/4" Length, 1-11/16" Width. PVC, White.

Category: 1-Gang Raceway Box Covers & Faceplates

Steel, 1-Gang, Tap-Off Fitting, 3000 Series. Size: 4-3/4" Length. Color: Gray.

Category: 1-Gang Raceway Box Covers & Faceplates

For covering standard toggle switches. Gray

Category: 1-Gang Raceway Box Covers & Faceplates

For mounting up to three power and communication devices with the 5500 Series Raceway. Utilizes 5507 Series Faceplates, Wiremold Open System communication modules, Ortronics TracJack and Series II inserts, and Pass and Seymour Activate Series inserts. For faceplate options, see 5507 Series Faceplates. NOTE: CM-EPLA End Plates are required when using Wiremold communication modules and Pass and Seymour Activate inserts. S2-EPL End Plates are required when using Ortronics Series II inserts. To mount TracJack inserts, use 5507-4TJ or 5507-6TJ Faceplates. White

Category: 1-Gang Raceway Device Brackets & Plates

Raceway Outlet Box, Low Voltage, 1-Gang, Non-Metallic, White, Adhesive Backing, Use with Pan-Way LD Profile Raceway, 1-3/4" Deep

Category: 1-Gang Raceway Device Boxes

Snap-on horizontal sloped communication faceplate. Accepts four Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, Electric Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

WMD RFBAS2 RFBA 1.59 IN SINGL

Category: 1-Gang Raceway Device Brackets & Plates