Corded Tools

Compact Angle Grinder, 4-1/2", With Paddle Switch With Lock-On

Category: Corded Grinders

18 Gauge Straight Shear, 6.5 AMP motor delivers 0 - 2,500 SPM, Includes: (1) Shear Blade, Right (725092-5), (1) Shear Blade, Left (725093-3), (1) Shear Blade, Center (725094-1), (1) Shear Head Assembly (125112-9) & (1) Hex Wrench (783215-1)

Category: Shears

7" Angle Grinder, with AC/DC Switch

Category: Corded Grinders

M18 FUEL™ 14” Abrasive Chop Saw, 15A Corded Power, Tool-Free Blade Change & Tool-Free Fence Adjustment, 4,000 RPM, 200+ Cuts Per Charge On 12.0AH Pack (Sold Separaterly)

Category: Corded Dry Cut Saws

Hydraulic Pump, Electric, Pressure Capacity: 10 000 PSI, Horsepower: 1-1/2 HP, Usable Oil Capacity: 6 Quart (57L), Hydraulic Flow: 54 Cubic Inches Per Minute, Voltage: 120 AC, Weight: 71 lbs

Category: Corded Hydraulic Pumps With Pendant

Milw 49-80-0300 Heat Gun accy Assmt

Category: Corded Heat Guns

Milwaukee 6130-33 7 Amp 4-1/2" Small Angle Grinder. Voltage: 120 AC Only. Max Watts Out (Power): 750. No Load RPM: 11,000. Spindle Thread: 5/8-11". Tool Length: 10.25". Tool Weight: 3.5 lbs.

Category: Corded Grinders

Abrasive Cut-Off, Wheel Diameter: 14", No Load RPM: 3,900, Voltage: 120V AC, Current: 15 Amps, Weight: 5.4 lbs, Spindle Thread: 1", Included: 14" Abrasive Cut-Off Machine, Abrasive Wheel, Hex Wrench, and Vise.

Category: Corded Dry Cut Saws

5" SJS™ High-Power Angle Grinder

Category: Corded Grinders

23 lb. AVT® Demolition Hammer, Accepts SDS-MAX Bits, Includes: (1) 12" Bull Point, SDS-MAX (751423-A), (1) Hammer Bit Grease (194683-7), (1) CLOTH F/WIPING OIL (443122-7) & (1) Tool Case

Category: Corded SDS Rotary Hammers

For Use with FORCE LOGIC™ 10,000psi Hydraulic Pump, Keeps Pump in Ideal, Level Operating Position while Freeing up Space Inside the Bucket, Extendable Bar & Rubber Bumpers Allows for Use with Most Existing Buckets & Steel Baskets

Category: Corded Hydraulic Pumps

Drill; Magnum; Voltage Rating: 120 Vac; Amperage Rating: 8 Amp; Speed: 0 - 850 Rpm At No Load; Chuck Size: 1/2 In; Chuck Type: Heavy-duty Industrialkeyed; Cord Type: 8 Ft Fixed 3-wire Rubber; Trigger Lock: On; Tool Weight: 5.400lb; Capacity In Wood: 1/12 In Auger Bit, 2-9/16 In Self-feed Bit; Spindle Lock:no; Metal Capacity: 2 In Hole Saw; Soft Grip Handle: N

Category: Corded Heavy Duty Drills With 1/2" Keyed Chuck

Ridgid; Pipe Die; Z; Thread Per Inch: 8 Tpi; Thread Type: Npt; Thread Direction:rh; Material: High Speed Steel; Capacity: 2-1/2 - 4 In

Category: Corded Hand Held Threaders

High Pressure Hose Unit, 3 Feet X 1/4 Inch, with (1) 1/4" Male Coupler and (1) 1/4" NPT Swivel Threaded Fitting

Category: Corded Hydraulic Hoses

High-Pressure Hose with Swivel (Without Couplers), 1/4" x 3'

Category: Corded Hydraulic Hoses

Milwaukee® 6268-21 A64A 4-Position Orbital Double Insulated Jig Saw Kit, 120 VAC, For Blade Shank: T-Shank, 9-1/2 in OAL

Category: Corded Band Saws

Compatible With All 10,000Psi (700Bar) Rated Hoses And Single-Acting Accessory Heads, Easiest Set-Up: 80% Smaller, 75Lbs Lighter Than Gas Units, Gas-Like Performance: 24Sec Cycle Times And Up To 60 Presses On A Single Charge On 1590 Acsr Connectors

Category: Corded Hydraulic Pumps

Compatible with FORCE LOGIC™ 10,000psi Hydraulic Pump, Male-Female Connectors for Interconnectable Extension up to 24ft of Length , IP 67 Ingress Protection for Reliable Use in the Elements

Category: Corded Hydraulic Pumps

6-1/2" Plunge Circular Saw, 55" Guide Rail, 12 Amp, Electric Brake, Case

Category: Corded Circular Saws

Conductive Hose Assembly with Male and Female Conductors 10'. High pressure hydraulic hose units for use with Greenlee hydraulic pumps. Equipped with couplers and dust caps.

Category: Corded Hydraulic Hoses

Adapter, Square Drive Adapter

Category: Corded Threader Accessories

Ridgid; Threading Machine; Power Drive; Pipe Capacity: 1/8 - 2 In; Motor: 1/2 Hp, Universal, Reversible Motor, Single-phase, 50/60 Hz, 115v (230v Available); Chuck: Ridgid Speed Chuck With Replaceable Rocker-action Jaws; Spindle Speed: 38 Rpm; Cutter: Heavy-duty (2); Rear Centering Device: Cam-action Turns With Chuck;voltage Rating: 115 V; Frequency: 50/60 Hz; Thread Type: Npt; Standard Equipmentparts: 300 Power Drive Only With Footswitch, No. 811a Universal, Quick-opening Die Head, 1/2 - 3/4 In Universal Alloy Die Set, 1 - 2 In Universal Alloy Die Set,no. 360 Cutter: Capacity: 1/8 - 2 In (3 - 50 Mm) Pipe, 1/4 - 7/8 In (6 - 20; Switch: Heavy-duty For/off/rev And Integral Foot Switch; Automatic Oiler Accessories: Gear Head Assembly With Oil Pump, Oil Pan Assembly, Oil Sprout, Support Bar,necessary Connectors, One Gallon Of Nu-clear Thread Cutting Oil; Rod Threading Capacity: 1/4 - 2 In; Max. Geared Threader Capacity: 6 In; Accessories: 42360 - Stand For 300 Power Drive, 83540 - Stand For 300 Power Drive Export, 42575 - Transporter (for Power Drives And Tristand Vises), 68815 - Carriage With No. 312 Lever, 42385 - Carriage Feed Lever, 10883 - Oiler With 1 Gallon Of Nu-clear Threadcutti; Weight: 212 Lb

Category: Corded Threading Machines

Head Swivels 360deg And Can Be Locked Tight In Any Position, Convenient, Easy Reach Forward/reverse Lever, Voltage: 28vdc, No Load Speed: 0 To 400 And 0 To 1000rpm, Torque: 1081lb-in, Chuck Type: Keyed, Chuck Size: 1/2in, Capacity In Steel:1/2in, Capacit

Category: Corded Right Angle Drills

Threading Machine, Rigid, 1/8" - 2" Pipe, Geared Threaders

Category: Corded Threading Machines