Fiber Raceway Systems

PDT FRRF126RSCLYL SPLIT COVER

Category: End Caps & Reducers

PDT FRRASC12LBL SPLIT COVER,

Category: Elbows & Bends

PDT FRFWC12X4W6LBL FITTING, 4

Category: Tees, Crosses & Junctions

PDT FRDDS6X4LYL FITTING, DUAL

Category: Drop-Offs, Spillouts & Outlets

FiberRunner snap-on hinged cover for channel FR4X4YL10. Hinge feature enables positioning of cover at angles between 30° to 90°. The cover comes in 10 feet lengths

Category: Covers & Retainers

FiberRunner® Spill-Over Junction Fitting with 4x4 Exit, Yellow

Category: Drop-Offs, Spillouts & Outlets

4x4 Solid Duct Without Cover (1/Carton), Color: Yellow

Category: Straight Sections

Pre-assembled 12in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Yellow, 1 piece.

Category: Couplers & Joiners

Attaches to 4x4 channel and/or fittings to create a 90° vertical drop from a horizontal run. Hinged door included. Accepts FTR4X4YL, FIDT4X4BL, S4X4YL6 or E4X4YL6 directly. Accepts optional snap-on cover FRHC4YL6 in conjunction with channel.

Category: Tees, Crosses & Junctions

Pre-assembled 4in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Yellow, 1 piece.

Category: Couplers & Joiners

6x4 Horizontal Tee Fitting, 90° Horizontal Branch, H: 4.22", W: 10.77", Accepts optional split cover FRTSC6YL

Category: Tees, Crosses & Junctions

4x4 Slotted Duct With Hinged Cover (1/Carton), Color: Yellow

Category: Straight Sections

The FiberRunner® 4x4 Spill-Over Fitting Cover is used to fully enclose 4x4 channel in conjunction with the 4x4 spill-over junction. The spill-over junction cover snaps onto the channel base. It has a hinged feature that allows easy access to add or remove cables.

Category: Drop-Offs, Spillouts & Outlets

Used to route cable into one or two pieces of 1.5 (38mm) diameter split corrugated tubing. Requires coupler to be used with 4x4 FiberRunner®Fitting. Used with any 4x4 FiberRunner®Fitting.

Category: Drop-Offs, Spillouts & Outlets

The FiberRunner® 2x2 Spill-Over Junction Fitting is used in cable routing systems. It assembles onto 4x4, 6x4, 12x4, or 24x4 FiberRunner® Channels. It mounts directly to the existing installation with no alteration required. The spill-over junction fitting includes mounting hardware.

Category: Drop-Offs, Spillouts & Outlets

2" CONDUIT

Category: Tees, Crosses & Junctions

10-2 VNTC 600V

Category: Tees, Crosses & Junctions

ELITE EU24 LENS ONLY

Category: Tees, Crosses & Junctions

Provides secure, accessible route for cables spilling out from a vertical tee or spill-over junction to rack mounted equipment. Kit includes 6' length of 2x2 FiberRunner® Hinged Channel H2X2OR6, 6' length of 2x2 snap-on hinged cover HC2OR6, four adjustabl

Category: Drop-Offs, Spillouts & Outlets

Attaches to 4x4 channel and/or fittings to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90° angle fitting FROVRA4X4YL to change level of a straight horizontal run. Includes split cover.

Category: Elbows & Bends

Used to limit the bend radius of the cable to 2 (50.8mm) when exiting from 4x4 FiberRunner®Channel or a 4x4 FiberRunner®Horizontal Tee.

Category: Drop-Offs, Spillouts & Outlets

Optional split cover for the horizontal tee fitting FRT4X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: Tees, Crosses & Junctions

Optional snap-on hinged cover for channel FR4X4OR2. Hinge feature enables positioning of cover at angles between 30° to 90°.

Category: Covers & Retainers

Cable retainer holds cable in the channel when cover is not used. Install anywhere on channel, near the coupler or every 18 (457mm). Black color only. 12 x 4 System.

Category: Covers & Retainers