Voltage & Continuity Testers

Electronic AC/DC Voltage Tester, Maximum Rating: CAT IV 600V AC, Drop Protection: 9.8 Ft.

Category: Voltage & Continuity Testers

Electronic Ac/Dc Voltage Tester 12 To 240V Ac, 1.5 To 24V Dc Et40 Tests Ac Voltages From 12V To 240V Ac At Four Useful Levels Aligned With Commonly Used Residential Voltages Tests Dc Voltages From 1.5V To Greater Than 17 To 24V At Four Useful Levels Aligned With Commonly Used Dc Voltages Bright Leds Illuminate To Indicate The Type And Level Of Voltage Detected Built To Withstand A 9.9-Foot (3 M) Drop Indicates Polarity When Measuring Dc Voltages Powers Off Automatically After Approximately 2 Minutes Of Non-Use To Conserve Battery Life Catiii 250V, Class 2, Double Insulation Ingress Protection Ip41 Dust And Water Resistant Built-In Test Lead Holders On Sides Of Tester Low Battery Indicator With Easily Accessible Battery Compartment Pocket Clip Secures Tester To Pocket For Reliable Everyday Carrying Uses 2 X Aaa Batteries (Included) Identifies And Distinguishes Between Ac Or Dc Voltage

Category: Voltage & Continuity Testers

3 to 20V DC; Current: 0.05 to 3A (USB-A); 3 to 20V DC; Current: 0.05 to 5A (USB-C) Continuously Monitor Up to 1000 Hours of Voltage, Current, Capacity/Charge Delivered, Energy, and Resistance (Calculated), Tests Most Common Standard USB-A or USB-C Ports, Including Qualcomm Quick Charge® Ports

Category: Voltage & Continuity Testers

Dual Range Voltage Detector, CAT IV 1000V Safety Rating?, Includes (2) AAA Batteries

Category: Voltage & Continuity Testers

Non-Contact Voltage Tester, UL Certified CAT IV 600V AC, 50 to 600 V AC, Auto Power Off - After 10 Minutes Of Inactivity (No Button Pressed And No Signals Detected), The Tester Will Emit One Long Beep (~0.5s) And Then Shut Off, Note: If The Flashlight Is On, It Will Be Also Shut Off, Low Battery Indication - If Battery Voltage Is Less Than Around 2.4V, The Green LED In The Tip Will Flash 3 Times And The Buzzer Will Send Out One Long Beep, Then Turn Off The Device

Category: Voltage & Continuity Testers

Fork Meter, Multimeter, Maximum Rating: 200A AC & 1000V AC/DC, Features: 0.63" Jaw Opening, True-RMS, LED Work Light, Resistance, Continuity, Amperage, Voltage & Lo-Z Function, Includes: Test Leads, (2) AA Batteries & Manual

Category: Voltage & Continuity Testers

Measures and Displays the USB Port Voltage, Current, Capacity, Energy and Resistance Simultaneously, Requires NO BATTERIES as it Draws Power from the Power Source

Category: Voltage & Continuity Testers

Non-Contact Voltage Tester Pen, 50 to 1000V AC, Volt Pen With High Intensity, Bright Green LED Indicates The Tester Is Powered On, Auto Power-Off Feature Conserves and Extends Battery Life CAT IV 1000V Safety Rating, Includes: Instructions and (2) AAA 1.5 Volt Batteries

Category: Voltage & Continuity Testers

Voltage Tester With LED Flashlight, Non-Contact, Range 50-1000 Volt AC, Dust Tight And Water Proof, Audible Notification Disable, Auto Power Off, Low Battery Indication, UL Listed

Category: Voltage & Continuity Testers

Voltage Continuity Tester, UL Certified CAT IV 600V, 0-600V AC/DC, Measures AC/DC Voltage, Low Impedance AC Voltage (Lo Z) (For Ghost Voltage Dissipation), Automatically Identifies AC Or DC Voltage And Determines DC Polarity And Tests For Continuity And GFCI Operation, Backlit Display And Flashlight

Category: Voltage & Continuity Testers

FC Current Module, Wireless, Features: True-RMS, 2500V, Includes: iFlex™ Wireless Current Meter, Strap.

Category: Voltage & Continuity Testers

Fluke Connect ir3000 FC Connector allows you to wirelessly transfer data from your existing Fluke Tools to your smart phone. Fits over the IR port of your existing Fluke Tools Upgradeable by USB Immediately enables you to graph, save and share the tool's reading with your team from your smart phone ***Meter Sold Separately***

Category: Voltage & Continuity Testers

Continuity Tester, Features: Continuity, Current, Resistance, Beeper, Auto-Off, Includes: 4mm Detachable Probes.

Category: Voltage & Continuity Testers

True RMS Multimeter, Includes (1) Dual Banana Thermocouple, (2) AA Batteries (1)Manual, (1) Electrical Test Lead Set, (1) NIST Certificate of Calibration with Data

Category: Voltage & Continuity Testers

CCI® CC 40136N METER,DETECTOR VOLTAGE,DIGITAL

Category: Voltage & Continuity Testers

Standard Leads, Replacement Part, Compatible Continuity Tester: Vol-Con (61-076)

Category: Voltage & Continuity Testers

Fork Meter, Multimeter, Maximum Rating: 200A AC & 1000V AC/DC, Features: 0.63" Jaw Opening, True-RMS, LED Work Light, Resistance, Continuity, Amperage, Voltage, Temperature, Capacitance, & Lo-Z Function, Includes: Test Leads, (2) AA Batteries, Thermocoup

Category: Voltage & Continuity Testers

Fork Meter, Multimeter, Maximum Rating: 600A AC & 600V AC/DC, Features: 1.3" Jaw Opening, True-RMS, LED Work Light, Resistance, Continuity, Amperage, Voltage, Temperature, Capacitance, & Lo-Z Function, Includes: Test Leads, (2) AA Batteries, Thermocouple

Category: Voltage & Continuity Testers

Fluke 80k-40 High Voltage probe

Category: Voltage & Continuity Testers

AC Voltage Detector, Dual Range, with Flashlight, Non-Contact Detection, Range: 24 to 1000 Volt AC and 100 to 1000 Volt AC. Complete with Two AAA Batteries.

Category: Voltage & Continuity Testers

Clamp Meter Electrical Test Kit, Measure AC Current With Clamp & AC/DC voltage, Resistance & Continuity With Test Leads, CAT III 600V, Class 2, Double Insulation Safety Rating, AC Auto-Ranging 400 Amp Digital Clamp Meter, Backlit Display, Includes Case, Test Leads & Batteries

Category: Voltage & Continuity Testers

40126N DUAL RANGE NON CONTACT AC VOLTAGE DETECTOR

Category: Voltage & Continuity Testers

Non-Contact Voltage Tester Detects Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets, and Wires, High Intensity, Bright Green LED Indicates the Tester is Operational and Aids in Illuminating the Workspace, When Voltage is Detected, a High Intensity, Bright Red LED Illuminates and a Beeping Sound is Generated, Auto Power-Off Feature Conserves and Extends Battery Life, 50 to 1000V AC Power Operating Range Allows Broad Application, Receptacle Tester is Designed to Detect the Most Common Wiring Problems in Standard Receptacles: Open Ground, Reverse Polarity, Open Hot, Open Neutral, Hot/Ground Reversed, Kit Comes With NCVT1P Non-Contact Voltage Tester, RT205 GFCI Receptacle Tester, Instructions, and All Required Batteries

Category: Voltage & Continuity Testers

Voltage Tester, Non-Contact, Maximum Rating, 50-1000V AC, Safety Rating: CAT IV 1000V AC, Illuminates/Buzzes At Approximately 0.39" (10 mm) Distance From A Device/Wire Carrying 120V, Operates On (2) AAA Batteries

Category: Voltage & Continuity Testers