Safety, Tools, & Testing

Carbide Tipped Hole Saw, Diameter: 7/8" (22 mm), Chuck Size: 3/8", Conduit Size: 1/2"

Category: Carbide Tipped Hole Saws

Cut Level 1 Nitrile Dipped Gloves, SMARTSWIPE™ Index Finger Permits Use of Touch Screen Devices Without Removing Gloves, Textured Nitrile Palm, Breathable Glove Design, Size: XL

Category: Dipped Gloves

Combo Drill/Tap Bit, Size: 1/4-20NC, Hex Shank Size: 1/4", Material Thickness: 10GA

Category: Combination Drill / Tap Bits

Pro Folding Hex Key Set, 11 Fractional Inch-Sized Keys 70550 Pro Folding Hex Key Set With 11 Extended-Reach Blades Key Sizes: 1/2, 3/8, 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 7/64, And 3/32-Inch

Category: Hex Key Sets

Better Fit. Better Protection., ANSI Cut Level 2, Reinforced Nitrile Coating Between Thumb and Finger, Size: Large

Category: Dipped Gloves

Clog Resistant Marker Tip. Writes through Dusty, Wet and Oily Surfaces. Durable Marker Tip for Writing on Concrete, OSB and Rough Surfaces. Built-In Hard Hat Storage Clip. Fine Point.

Category: Marking Pens & Pencils

M210 Portable Label Printer, Auto-Format Labels With 11 Pre-Loaded Application Design Guides For Rapid And Accurate Label Creation, Military-Grade Shock And Vibration Resistance Per MIL-STD-810G Method 5.16.6 SA4.6.5 – Drop Tested To Withstand The Roughest Job Sites, Easy-To-Access Hot Keys And Menus For Fast Label Creation, On-Board Symbols And The Ability To Store 12 Label Files Up To 2MB, Ability To Create UPC, DataMatrix, And QR Codes, Onboard Label Material Gauge Tracks The Amount Of Material Left In The Cartridge, Includes: (1) M210 Label Printer (M210), (1) M21 Series Nylon Cloth Patch Panel and Wire and Cable Labels (M21-750-499) & (1) Quick Start Guide, Powered By (6) AA Alkaline Or Optional Rechargeable Lithium-Ion Batteries (Sold Separately)

Category: Portable Label Printers

Combo Drill/Tap Bit, Size: 10-32NF, Hex Shank Size: 1/4", Material Thickness: 10GA

Category: Combination Drill / Tap Bits

Zinc Rich Galvanize Coating, Zinc-It, Application: Prevent Rust and Corrosion, Touch-Up Damaged Galvanized Coatings, Includes: 13 oz Aerosol Spray Can

Category: Cold Galvanize Coatings

Rechargeable 230 Degree Flexible Head Lamp, 5 Watt, 350 Lumens, Run Time: 2.5 hrs on High, 8 hrs on Low, Charge Time 2.5 hrs, Type C Charging Port, ***Lithium Battery, Ground Ship Only***

Category: Battery Operated Head Lamps

Conduit Measuring Pull Tape, 1800-Pound x 1300-Foot, Woven, Flat Polyester Strapping That Disperses Pull Load And Minimizes Stretching When Pulling, Tape Is Marked With Easy-To-Read, Descending 1-Foot Increments To Measure Conduit Runs And Determine The Amount Of Tape Left To Pay Out, Pre-Lubricated To Reduce Friction, Hole In Bucket Lid For Controlled, Tangle-Free Dispensing, Bucket Provides Easy Storage And Transport, 1800-Pound (816 kg) Tensile Strength, Additional Pull Tape Tensile Strengths And Lengths Available

Category: Measuring Pulling Tape

Multi-Purpose Towel, Monster-Wipes, Dimensions: 12" x 9", Includes: 82 Wipes

Category: Brooms, Rags, & Towels

Continuity, Current and Voltage Tester, 100 Amp, 0-600 Volt AC/DC Range, Open Jaw, Includes 4mm Detachable Probes and Instruction Sheet

Category: Voltage & Continuity Testers

Tape Measure, 25' Magnetic Double Hook

Category: Tape Measures & Rulers

Carbide Tipped Hole Saw, Diameter: 1-1/8", Chuck Size: 3/8", Conduit Size: 3/4"

Category: Carbide Tipped Hole Saws

5 Inch Lightweight Flush Cutter, Cuts Up to 16 AWG Wire

Category: Shears

Screwdriver, Length: 9-3/4", Shank Length: 6", Slotted Cabinet Tip (3/16")

Category: Slotted Cabinet Tip Screwdrivers

High Leverage 12° Angled Diagonal Cutters

Category: Diagonal Cutting Pliers

Better Fit. Better Protection., ANSI Cut Level 2, Reinforced Nitrile Coating Between Thumb and Finger, Size: Medium

Category: Dipped Gloves

9V Alkaline Batteries, 12-Count Display Pack, Holds Power for Up To 5 Years in Storage, Priced per Individual Battery, Order in Multiple of 12

Category: Non-Rechargeable 9V Batteries

Klein; Step Drill Bit Double Fluted, 3/8" Hex Shank, Diameters: 7/8", 1-1/8", 1-3/8", Number of Hole sizes: 3, Appropriate uses: Stainless Steel, Mild Steel, Drywall, Ceiling Tile, Laminates, Wood, Plastic

Category: Step Bits

AA Size, 1.5V, Alkaline Batteries, 24-Count Pro Pack, Holds Power for Up To 10 Years in Storage, Priced per Individual Battery, Order in Multiples of 24

Category: Non-Rechargeable AA Batteries

Ship Auger Bit, Diameter: 7/8 inch, Length: 18 inch, Shank: 7/16 inch Hex

Category: Long Ship Auger Bits

Magnetic metal stud finder.

Category: Stud Finders