"vdv500-705"

Tone & Probe Test and Trace Kit, Simple Tone Generator And Wire Tracing Probe For Non-Active Wire Runs, Responsive Probe With Durable, Non-Metallic, Conductive Tip, Alligator Clips For Unterminated Wires, RJ45 To RJ45 Test Cable, Toner And Probe Together Perform Pin To Pin Wire Map Test, Work Light On Probe Tip For Use In Dark Spaces, Adjustable Volume Control, AAA Batteries (Included), Replaceable Test Cables Available (Cat. No. VDV770-855), Headphone Jack For Noisy Environments (Headphones Sold Separately)

Category: Wire Finders

Probe-PRO Tracing Probe, Traces Non-Energized Wiring When Used With Toner-Pro Tone Generator (VDV500-063, Sold Separately), Work Light For Use In Dark Spaces 3.5 mm Headphone Jack For Noisy Environments (Headphones Not Included), Powered By/Includes (4) AA Batteries

Category: Electrical Testers

4 Inch Slim LED Downlight, 120V, 90+ CRI, 705 Lumens, Selectable Color Temperature: 2700K/3000K/3500K/4000K/5000K, 100-5% Dimming, Matte White

Category: 4" Recessed LED Downlights

IDE 36-705 SPIRAL STEP BIT 1/

Category: Step Bits

DIGITAL TONE AND PROBE SET

Category: Tone Generators & Probes

4-Piece kit, Includes: #1 (1/8”-1/2”) (36-701), #4 (3/16”-7/8”) (36-703). #9 (1/4”-1-1/8”) (36-705), #46 (1/4”-1-3/8”) (36-706), Rugged, durable molded plastic case with metal latch

Category: Step Bit Kits

MC Cable Connector, Insulated, 1/2 Inch Diameter, Snap-In, Cable Range .525 - .705 Inch, Zinc Die Cast

Category: Single Barrel MC / AC Connectors

Rigid Conduit Strap, 1-Hole, Size: 1-1/2 Inch, Steel, For Use With Rigid/IMC Conduit

Category: Steel 1-Hole Conduit Straps

Chase Nipple, 1-1/2 Inch, Material: Zinc Die Cast, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Zinc Die Cast Chase Nipples

Digital Probe Traces Non-Energized Wiring When Used With The Digital Tone Generator (Cat. No. Vdv500-163 Required; Sold Separately), Trace And Locate Cables On An Active Network When Used With The Digital Tone Generator (Cat. No. Vdv500-163 Required; Sold Separately), Work Light For Use In Dark Spaces, 3.5 Mm Headphone Jack For Use In Noisy Environments (Headphones Not Included), Tool-Less, Twist-And-Lock Replacement Tip (Cat. No. Vdv999-070) Available, 60Hz Filter For Accurate Tracing, Works With Klein'S Scout® Pro And Lan Scout® Jr. Testers, Wire Mapping Capabilities To Check Pin-To-Pin Connections With Shield Detection When Used With The Digital Tone Generator (Cat. No. Vdv500-163 Required; Sold Separately)

Category: Tone Generators & Probes

Offset Bender, Capacity: 1/2" EMT, Weight: 875lbs

Category: Offset Conduit Benders

Spring Clamp Terminal Block, Ground, Green/Yellow

Category: 2.5mm Feed Through & Ground Terminal Blocks

Union, 2 1/2 Inch, Female/Female, Malleable Iron, Conduit to Conduit, Explosion-Proof/Dust-Ignitionproof.

Category: Explosion-Proof Type UNF Unions

Spring Clamp Terminal Block, Feed Through, 2.5 mm Cross-Section, Blue, 50 Piece

Category: 2.5mm Feed Through & Ground Terminal Blocks

ZK2.5-OR PI-Spring Clamp Feed Through Terminal Block, Rated Current: 24 Amps, Rated Voltage: 1000, Material: Polyamide, Color: White, Mounting: DIN-Rail

Category: 5.2mm Feed Through & Ground Terminal Blocks

Spring Clamp Terminal Block, Double Deck, Gray

Category: 5.2mm Feed Through & Ground Terminal Blocks

ZK2.5-OR PI-Spring Clamp Feed Through Terminal Block, Rated Current: 24 Amps, Rated Voltage: 1000, Material: Polyamide, Color: Black, Mounting: DIN-Rail

Category: 5.2mm Feed Through & Ground Terminal Blocks

Spring Clamp Terminal Block, Feed Through, 2.5mm Cross-Section, PI Spring, Grey, 50 Piece

Category: 2.5mm Feed Through & Ground Terminal Blocks

End Section for Terminal Block, Dark Grey

Category: Terminal Block End Stops

ZK2.5-OR PI-Spring Clamp Double-Deck Feed Through Terminal Block, Rated Current: 24 Amps, Rated Voltage: 800, Material: Polyamide, Color: Gray, Mounting: DIN-Rail, Spacing 5.2mm

Category: Double Deck Feed Through & Ground Terminal Blocks

ZK2.5-OR PI-Spring Clamp Feed Through Terminal Block, Rated Current: 24 Amps, Rated Voltage: 1000, Material: Polyamide, Color: Orange, Mounting: DIN-Rail

Category: 5.2mm Feed Through & Ground Terminal Blocks

Tone & Probe PRO Kit, Includes: VDV500-063 Tone Generator, VDV500-123 Tracing Probe aand VDV770-500 Zipper Pouch

Category: Wire Finders

Polyamide End Section Cover, Spacing: 2mm, Color: Dark Gray

Category: Terminal Block End Sections

Digital Tone Generator Traces And Locates Cables On An Active Network When Used With Digital Tracing Probe (Cat. No. Vdv500-223; Sold Separately), Wire Mapping Capabilities To Check Pin-To-Pin Connections With Shield Detection (Requires Digital Tracing Probe, (Cat. No. Vdv500-223; Sold Separately), Rugged Angled Bed Of Nails (Abn) Clips Securely Attach To Wires, Rj45 Port To Test Rj45, Rj11 And Rj12 Data Cables, Tests For Continuity And Polarity With Response Displayed On Clearly Labeled, Easy-To-Read Leds, Three Distinct Tone Cadences, Auto Power-Off And Low Battery Indicator

Category: Tone Generators & Probes