"ab-664ws the austin co."

100 VA, 1-Phase, 120 x 240 Primary Volts - 12/24 Secondary Volts, Buck-Boost Transformer, Non-Encapsulated, Indoor/Outdoor, 50/60Hz. ***Use attached Catalog Page to see the many input and output options***

Category: Up To 500 VA Buck-Boost Transformers

Liquidtight Connector, 1 Inch, 45°, Insulated Throat, External Grounding Lug, Zinc Electroplated Steel, For Use With Liquidtight Flexible Metal Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

App 5075us 3/4" Emt Stl Ss coupling Made In The Usa

Category: Steel EMT Set Screw Couplings

Liquidtight Flexible Conduit Connector And Wire Mesh; Trade Size 1 Inch; Connector Type 45 Deg; Connector Material Zinc Electroplated Chromate Epoxy Powder Coated Malleable Iron; Throat Type Insulated; Mesh Material Stainless Steel; Standard Package 20; Approval Ul 514b, Csa C22.2; Used On Liquidtight Flexible Metal Conduit; Applicable Standard Nema Fb-1; Application Commercial; Size 1.81 Inch Dia; Thread Length 1.81 Inch

Category: Liquidtight Strain-Relief Grips with Mesh

LED Enclosure Light with quick-install feature allows fitting to the 25mm hole pattern of enclosure profiles. This EL LED Enclosure Light With Motion Sensor, EL1200M24V item has 1200 lm and is rated for 24 VDC.

Category: Enclosure LED Light Packages

Liquidtight Connector With External Grounding Lug, Insulated, Straight, 1-1/4 Inch, Malleable Iron, For Use With Liquidtight Flexible Metal Conduit.

Category: Malleable Iron Liquidtight Flex Connectors

Liquidtight Connector, Insulated, Straight, Size: 3/4 Inch, Steel, For Use With Liquidtight Flexible Metal Conduit in Sheet Metal Enclosure Installations.

Category: Straight Steel Liquidtight Flex Connectors

Main Service Module, Main Fusible Switch, 1200 Amp, 3-phase, 100kaic With Classt Fused, Fuse Not Included, Main And Neutral Lugs Included, 120/208 Vac, Bottomfeed, Aluminum Bus Material, NEMA 3 - Rainproof Enclosure, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Main Terminal Boxes

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 3 IN Outside Diameter, 1.98 IN Inside Diameter, 2 X 1-1/2 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, NEMA : FB-1, For Used To Reduce The Size Of A Knockout Or Slip Hole

Category: Reducing Washers

Step Bit, Kwik Stepper, Length: 3-9/16", Diameters: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16" & 7/8", Appropriate Use: Mild Steel, Copper, Brass, Aluminum, Wood, Plastic & Laminates, Maximum Cutting Depth: 10 Gauge.

Category: Step Bits

15 Amp, 120 Volt, 3 ft. Cord Set, Molded-On NEMA Plug (5-15P) and Triple-Tap Connector (5-15R), Straight Blade, Automatic Reset GFCI Device, 14-3 SJTW Cord, RoHS Compliant

Category: In-Line GFCI Devices With Molded Plug & Triple Tap Connector

Constructed Of Durable Polyester, Our Lockout Tags Exceed Osha's 50 Lb Pull Requirement For Tagout Devices. Rigid Polyester Surface Is Easy To Write On And Stays Legible Longer Than Cardstock. The 3/8 Diameter Brass Eyelet Accepts Most Padlock Shackles.

Category: Lockout Tags

Connecting Bar Holder Freely Swivels And Moves With You When In Unlocked Position, Tool Holder Locks Bar At 0-Degree, 30-Degree, And 60-Degree Angles For Both Left And Right-Handed Use, Tucked Tunnel Loop Design Keeps Tools Tight To Belt And Accommodates Up To 3-Inch (7.6 Cm) Wide Belts, Durable, Full Grain, Russet Leather Patent Pending Holder, Designed In The Usa, Black Oxide Protective Coating To Prevent Rust On Metal Holder, Heavy-Duty Leather For Long Life, Designed For Best Use With All Klein Tools' Hex And Round Connecting Bars

Category: Tool Holders

The Panduit Pan-Steel® low-profile buckles are designed to maintain a safe, secure connection. Built with 304 AISI stainless steel with a fold-over lock, it is ideal for indoor and outdoor conditions. 0.5"W (13mm), 100pc.

Category: Non-Releasable Cable Ties

House Panel, 200 Amp, 120/240 Volt AC, 1-Phase, 8 Space, OH/UG Feed, 4 Jaw Meter, Service Entrance Rated, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: House Panels

Standard Meter Center, All-in-one, 1-inch Br Type - Euserc, 200 Amp, 10 Kaic, 40/40 Distribution, Main Breaker Included Bw2200, Ring, 21/2 Inch Ds Hub Factory Installed With Special Haskins Labels, Bottom Feed Breaker, Ug/oh Service, NEMA 3r - Rainproof, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

AccessPlus Rack Angles are used to mount 19in rack equipment inside the cabinet. This Rack Angles Square 19U, EWMR36S item fits 36.00 with a material of Steel colored Black.

Category: Indoor Wall Mount Data, Audio, & Video Enclosures

H-Max Series, The NEMA Type 12/IP54 option kit is used to convert a NEMA Type 1 to a NEMA Type 12 drive for frame FS6. Kit consists of a drive cover, fan kit and plugs.

Category: HVAC Variable Frequency Drive Enclosure Kits

The pan-post standoff is natural color and requires a #10 (M5) screw. It measures 1.06"L x .72"W x 1.97"H (26.9 x 18.3 x 50.0 mm). It is used with miniature, intermediate, and standard cable ties. It comes in packages of 100.

Category: Cable Tie Bases

Replace The Numbers, Letters And Characters You Need In Your Porta-pack Books With Our Convenient Ten Pack Refills. Made Of Durable B-500 Vinyl Cloth Materialand Available In Over 250 Different Refill Packs. Each Refill Pack Contains 10pages.

Category: Wire Marker Cards

Traditional Floor Cover For Use With Leviton 5" Poke Through Floor Box (PT500) Only, Accommodates All Standard Decora Receptacles, The Flip Lids Are A Double-Hinge Design That Can Open 180 Degrees And Lay Flat, Also Includes Metal Subplate And Pre-Assembled Gasket And Mounting Screws, And Cover Mounting Screws, Black

Category: Round Recessed Box Covers

App Stsr200 2-in L/t Str flex Conn

Category: Stainless Steel Strain-Relief Grips With Mesh

Folding Table Saw Stand, Adjustable Foot For Cutting On Uneven Surfaces, Compatible With The Milwaukee M18 FUEL Table Saw (2736) ***Sold Separately***

Category: Cordless Table Saws

The 4-way adhesive backed cable tie mount in black is mounted with rubber adhesive tape. It is 0.75" long x 0.75" wide (19.1 x 19.1 mm) and made of ABS plastic. It is used with miniature and intermediate cable ties. It is designed for indoor environments

Category: Cable Tie Bases