"ab-666sbg the austin co."

The 4-way adhesive backed cable tie mount in white is mounted with acrylic adhesive tape. It is 2.0" long x 2.0" wide (50.8 x 50.8 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with min

Category: Cable Tie Bases

The metal screw-on mount in natural uses a #10 (M5) screw. It is made of aluminum and used with miniature, intermediate, and standard cable ties. It is designed for indoor and outdoor environments and comes in packages of 100.

Category: Cable Tie Bases

Clamp, RC Beam, Outer Diameter of Conduit or Pipe 4.500 Inch, Nominal Conduit Size 4 Inches, Malleable Iron, For Mounting Pipe or Conduit Parallel to the Beam

Category: High Temperature Wire Connectors

App Stb150sr 1 1/2 Lt Kellums

Category: Liquidtight Strain-Relief Grips with Mesh

Plasti-bond Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles,each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90° Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A Mounting Outlet For Wiring Devices Or Lighting Fixtures Etc. Electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type LR Conduit Bodies

GED TSF420CSCU 200A OH/UG SFC PNL, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

Short Barrel Copper Lug, one hole with peep hole, wire range of 6 AWG. Produced from high conductivity copper tubing. Allows easy inspection of the termination to assure complete cable insertion. Marked with die index and color coded blue. cULus Listed for 35KV maximum when properly installed.

Category: 1-Hole Copper Compression Lugs

LevNet RF Wireless Decora Remote Switch, Dual Rocker, Self-Powered, EnOcean 902MHz, Compatible with LevNet RF Receivers, (GSA Unique Part). Made in the USA, Title 24 Compliant, ASHRAE 90.1 Compliant, Ivory

Category: Wireless Dimmers & Switches

The THLK3225 is a 3 pole plug-in kit designed to economically supply power to a subpanel. It is rated up to 225 A and can be used as a sub-feed or feed-thru lug.

Category: Load Center Sub-Feed Lug Blocks

Meter Base, 200 Amp, 1-Phase, 4 Jaw, OH/UG, 350 MCM Lugs, Hub Opening, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

Liquidtight Connector, 1 1/4 Inch, 90°, Insulated Throat, External Grounding Lug, Material: Zinc Electroplated Steel, For Use With Liquidtight Flexible Metal Conduit

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Locknut, Type: Bonded With Neoprene Gasket, Size: 3/4 Inch, Raintight, Material: Steel/Zinc, Installed As Per The National Electrical Code Article 345-Intermediate Metal Conduit and Article 346-Rigid Metal Conduit.

Category: Steel Conduit Locknuts

Locknut, Bonded With Neoprene Gasket, 1 Inch, Raintight, Steel/Zinc, Installed As Per The National Electrical Code Article 345-Intermediate Metal Conduit and Article 346-Rigid Metal Conduit

Category: Steel Conduit Locknuts

Bracket for vertical PDU mounting to the side of the4 postsracks (set of 2 brackets).

Category: Special Purpose Wire Duct

Allows padlocking of the breaker to prevent unauthorized operation FB1P8201

Category: Padlockable Circuit Breaker Handle Locks

Liquidtight Connector, 4 inch, Straight, With Grounding Lug, Material: Steel, For Use With Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

Liquidtight Connector, 3 Inch, 45°, Insulated Throat, External Grounding Lug, Zinc Electroplated Steel, For Use With Liquidtight Flexible Metal Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

C-H MB816B150STD 1 IN TYPE BR, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 3 IN Outside Diameter, 1.73 IN Inside Diameter, 2 X 1-1/4 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, NEMA : FB-1, For Used To Reduce The Size Of A Knockout Or Slip Hole

Category: Reducing Washers

Residential Meter Stack Module, 4 Jaw, Horn Bypass, Ring Style Meter Socket Covers, 1-Phase In, 1-Phase Out, 3 Meter Sockets, 120/240V, 125 Amp Socket Rating, 800 Amp Bus Rating, Aluminum Bus, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Main Terminal Boxes

1.5 KVA, 1-Phase, 120 x 240 Primary Volts - 16/32 Secondary Volts, Buck-Boost Transformer, Non-Encapsulated, Indoor/Outdoor, 50/60Hz. ***Use attached Catalog Page to see the many input and output options***

Category: 600 VA - 1.5 KVA Buck-Boost Transformers

Type:NEMA 4X Type: Nonmetallic Enclosure Special Features:Lift-off Type: screw down, flush aesthetically pleasing and opaque cover design with FIP formed-in-place polyurethane gasket system Application:Industrial control panels intended for general industrial use, operating from a voltage of 600 volts or less Material:ULTRAGUARD - Fiberglass reinforced polyester - thermoset Size:A=6.01", B=3.26", C=3.63", usable depth=3.08" Color:RAL 7035 - Gray - Modified with (1) 30.5 mm push button hole in the cover

Category: Fiberglass Screw Cover Junction Boxes

Panduit PLT8H-C0 Locking Cable Ties are designed to satisfy the needs of weather resistant applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Heavy cross section, 30.6" (779mm) length. Made of Weather Resistant Nylon 6.6 with high resistance to ultraviolet light, are black in color and come in packages of 100.

Category: Non-Releasable Cable Ties

Circ-a-w U227mtbpms15 200a mtskt&po, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - without Distribution