"mcg-65/11-120v"

Toggle Switch, Bat Handle Type, SPST, Maintained Contact, Circuit Functions: On Off, 20 Amp @ 125V AC, 12 Amp @ 250V AC. Metallic Toggle, Screw Terminal. Mounting: Bushing, 15/32".

Category: 1-Pole Toggle Switches

Threaded Conduit Nipple, 1-1/4 Inch x 4 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

M12™ Redlithium, 12V, Battery, Xc High Capacity, Lithium, Average Capacity: 3 Ah, For Use With Milwaukee® M12™ Cordless Tools, Includes (2) Batteries

Category: 12 Volt Cordless Tool Batteries & Chargers

Low Profile Power Strip with Receptacles & USB: 30" Length, 120V, 3 x 20A Tamper Proof Receptacles & 2 x USB Type A & USB Type C both delivering 5V 2.1A DC output, Black.

Category: General Duty Power Strips

Cable Shears-Twin Cutting Edges

Category: Shears

Threaded Conduit Nipple, 1-1/4 Inch x 2 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Threaded Conduit Nipple, 1-1/2 Inch x 2 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

Low Profile Power Strip with Receptacles & USB: 36" Length, 120V, 4 x 20A Tamper Proof Receptacles & 2 x USB Type A & USB Type C both delivering 5V 2.1A DC output, Black.

Category: General Duty Power Strips

22.5 mm, Non-Illuminated, Red, Plastic Push/Pull Release, Maintained, Emergency Stop Pushbutton. 40mm Diameter, 600V Rated. NEMA Rating: 1, 3R, 4, 4X, 12, 13. Includes: 1 Normally Open & 1 Normally Closed Contact.

Category: 22mm Push-Pull Pushbutton Operators

Cushion-Grip™ Pass Through Screwdriver Handle Receives Knect™ (M) Sockets Or Adapters, 1/4-Inch Socket Doubles As A Standard 1/4-Inch Bit Holder, Pass Through 90-Tooth Socket Wrench For Driving Hex Nuts On Threaded Rod And Requires Only 4 Degrees Of Swing For Ease Of Use In Tight Space With A 20-Percent Improvement Over 72-Tooth Ratchets, Socket Sizes: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4-Inch And 8 Mm, 10 Mm, 11 Mm, 12 Mm, 13 Mm, 14 Mm, 15 Mm, 17 Mm, 18 Mm; Bits: Ph #1, #2 , T20, T25 Torx® , 5/16-Inch Slotted, Klein Knect™ (M) Specialized 1/4-Inch Flip Socket Adapter Compatible With Klein Tools Pass Through Socket Wrench And Any 3/8-Inch Square Drive Ratchet, 1/4-Inch Magnetic Socket Doubles As A Standard 1/4-Inch Bit Holder, Compact, Modular Storage System With A Clear Lid Is Compatible With Modbox™ And Stackable With Other Cases Of Similar Design, Backwards Compatible With Standard 1/4, 3/8 And 1/2-Inch Drive Sockets With The Included Knect™ Adapters

Category: Sockets & Socket Sets

Threaded Conduit Nipple, 1-1/2 Inch x 4 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

M12 Fuel™ 2-Tool Combo Kit, Includes: (1) M12 FUEL™ 1/2" Hammer Drill/Driver (3404-20), (1) M12 FUEL™ 1/4" Hex Impact Driver (3453-20), (1) M12™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack (48-11-2440), (1) M12™ REDLITHIUM™ CP2.0 Battery (48-11-2420), (1) M12™ Lithium-ion Battery Charger (48-59-2401)

Category: 12 Volt Cordless Tool Combo Kits

Step Drill Bit; Vari-bit; Hole Sizes: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2 In; Shank Size: 1/4 In Diameter; Finish: Steam Oxide Coating; Point Type: Split

Category: Step Bits

Square Flat Washer. Size: 2-1/4" x 2-1/4", 3/16" Thickness, 11/16" Hole Diameter, 5/8" Bolt Diameter. Hot Dip Galvanized, Rolled Threads.

Category: Flat Square Washers

Appliance Switch, Rocker Type, SPST, Maintained Contact, Circuit Functions: On Off, 15 Amp @ 277V AC or 3/4 Hp. @ 125-277V AC. Color: Black. Connection Type: 1/4" Quick Connect Terminals.

Category: Appliance Rocker Switches

Cable Tie, Non-Releasable, Plenum/Air Handling. Length: 11-3/4" (300 mm). Width: 0.19" (4.8 mm). Color: White. Package Quantity: 100

Category: Non-Releasable Cable Ties

Toggle Switch, Bat Handle Type, SPDT, Maintained Contact, Circuit Functions: On Off On, 15 Amp @ 125V AC, 10 Amp @ 250V AC. Metallic Toggle, Screw Terminal. Mounting: Bushing, 15/32".

Category: 1-Pole Toggle Switches

Wire Lamp Guard, 1-1/2" Collar Diameter, Closed Bottom. For use with: 100 Watt Bulbs without Reflectors.

Category: Wire Type Lamp Guards

1-1/2" PVC Conduit Cap

Category: PVC Conduit Caps

Service Entrance Cap, Reducer Type, Conduit Size: 1-1/4". Weather Resistant, PVC. Includes: Female Slip Ends.

Category: Service Entrance Caps - Non-Metallic

Rubber Boot with Nut for Toggle Switches, 15/32" Thread.

Category: Toggle Switch Covers

General Purpose, Contactor, 30 Amp, 3-Pole, 600V Rated, 20-60 VAC/VDC Coil. AF-Line Series, AF16 Frame, IEC Contactor with (1) N.O. Auxiliary Contact Block.

Category: IEC Contactors - 17-37 Amp

Toggle Switch, Bat Handle Type, SPST, Maintained Contact, Circuit Functions: On Off, 8 Amp @ 125V AC, 4 Amp @ 250V AC. Metallic Toggle, 6" Wire Lead Terminals. Mounting: Bushing, 15/32".

Category: 1-Pole Toggle Switches

Cable Gland Connector W/ Red Run Pilot, 1/2 IN, 1/2-5/8 IN Openings, Steel, Electro-Plated Zinc/Chromate

Category: Straight Steel Cord Grips