"m12-250-3v-s industries, llc"

16-14 AWG Nylon Insulated Male Disc., 100/Pack

Category: Male Nylon Insulated Wire Disconnects

Nylon Insulated Male Disconnect, 22-18 AWG, 600 Volt, Red, 100/Pack

Category: Male Nylon Insulated Wire Disconnects

NSI IPLMD2505 NSIIPLMD2505

Category: Dual Sided Entry Wire Connector Blocks

10 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7CU. Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Single Sided Entry Wire Connector Blocks

Nsi Pt400 Pin Terminal 400 Str Cu Pin 250 Pink

Category: Copper Pigtail Adapters

ON OFF ON - SPDT - Large Nickel .250 QuikConnect Bat Toggle Switch

Category: 1-Pole Toggle Switches

Heavy Duty Copper C Tap Grounding Connector for 350 MCM to 4/0 AWG APPLICATIONS: Copper "C" Taps ensure positive, all-around compression with low-resistance and high pull-out values. Made of high conductivity copper, they satisfy the requirements of NEC250-81 and 250-91 for connecting to the grounding electrode system. Rated 600 Volts.

Category: C-Tap Press-On Lugs

insulation Piercing Connector 250-1 Main, 4/0-4 Tap

Category: Splices - Insulation Piercing

Compression Lug, 600 - 250 MCM, 2 Hole, 1/2 Inch Stud Size, Aluminum, Dual Rated CU/AL

Category: 2-Hole Aluminum Compression Lugs

ON ON - DPDT - Nickel .250 QuikConnect Bat Toggle Switch

Category: 2-Pole Toggle Switches

Cable Clamp Heavy Duty Natural .25" 100

Category: Cable Straps

Copper C Tap Grounding Connector for 10 to 8 AWG Copper "C" Taps ensure positive, all around compression with low-resistance and high pull-out values. Made of high conductivity copper, they satisfy the requirements of NEC250-81 and 250-91 for connecting to the grounding electrode system. Rated 600 Volts.

Category: C-Tap Press-On Lugs

Fully Insulated Nylon Male Disconnect, 12-10 AWG, 600 Volt, Yellow, 500/Pack

Category: Male Nylon Insulated Wire Disconnects

NSI HWHS1500-2500-48 1500-250

Category: Heavy Wall Heat Shrink

Toggle Switch Bat On/Off Dpst .250 Quickconnect

Category: 2-Pole Toggle Switches

Heavy Duty Copper C Tap Grounding Connector for 4/0 to 1 AWG APPLICATIONS: Copper "C" Taps ensure positive, all around compression with low-resistance and high pull-out values. Made of high conductivity copper, they satisfy the requirements of NEC250-81 and 250-91 for connecting to the grounding electrode system. Rated 600 Volts.

Category: C-Tap Press-On Lugs

Copper C Tap Grounding Connector for 6 to 8 AWG Copper "C" Taps ensure positive, all around compression with low-resistance and high pull-out values. Made of high conductivity copper, they satisfy the requirements of NEC250-81 and 250-91 for connecting to the grounding electrode system. Rated 600 Volts.

Category: C-Tap Press-On Lugs

Non-Insulated Male Disconnect, 16-14 AWG, Tin Plated Copper, 600 Volt, Silver, 100/Pack

Category: Male Non-Insulated Wire Disconnects

Winged Wire Connector, Grey, Easy Twist, 18-8 AWG, Bag of 250

Category: Color Coded Twist On Wire Connectors

10 Wire Stacked Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Stacked Polaris Insul-Tap Connectors are exceptional for use with large wire sizes, especially in tight-fitting spaces, small wire ways and panels. The wire holes on the bottom row allow for entry from either side of the connector for even greater versatility. Wire entry holes are stacked on top of each other for the ultimate in compact design. Supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. UL Listed 486B Wire Connector. Cold temperature rated to -45 degrees C, Rated 600V, 90 degree C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

Transformer Landing Lug

Category: Transformer Lug Kits

Heat Shrink End Cap, 6 AWG - 3/0 AWG, Round, Polyolefin

Category: Heat Shrink End Caps

Nsi Isrh750-insulated In-line splicer/reducer

Category: ln-Line Splicers/Reducers - Insulated

12-10 AWG Vinyl Insulated Ring Terminal 3/8" Stud Vinyl ring terminals are basic tongue ring terminals. Safe and reliable connections because it cannot be disconnected unless the screw is completely removed. Vinyl insulated ring terminals are made of tin-plated copper with brazed seam, vinyl (PVC). 300V, 75 degrees C. FEATURES: STYLE: Standard MATERIAL: Vinyl QUANTITY: 10 Count WIRE SIZE: 12-10 AWG STUD SIZE: 3/8 " LENGTH: 1.326 WIDTH: 0.59 BRAND EQUIVALENT: Morris Products 01070 Ilsco 44224-B10 Panduit PV1038RL Penn Union R4C38

Category: Vinyl Insulated Ring Tongues