"76072 mulberry metal products"

Conduit Bushing, 3/4 Inch, Threaded, Malleable Iron, For use with Rigid Metal and IMC Conduit

Category: Rigid & IMC Bushings

Conduit Outlet Box, Type GR, Explosion-Proof, Dust-Ignitionproof, Aluminum, Unilet, GRLB Hub Type, Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3.38 Inch Opening, 18 Cubic Inches and (2) 1 Inch Threaded Hubs, For Use With Threaded Metal Conduit

Category: Explosion-Proof LB Conduit Outlet Boxes

Flex Connector, 90°, Insulated, Squeeze, 1/2 Inch, Steel

Category: 90 Degree Two Screw Squeeze Flex Connectors

Dead-End Insulator, Material: Polymer, Voltage Class: 13.8 kV. Low Frequency Flashover (Dry); 90 kV. Low Frequency (Wet): 65 kV. Impulse Critical Flashover (Positive): 140 kV. Maximum Radio Influence Voltage at 500 kGz: <10 mV. Leakage Distance: 15.5". *** Discontinued ***

Category: Dead End Insulators

Dead-End Insulator, Material: Polymer, Voltage Class: 23.0 kV. Low Frequency Flashover (Dry): 130 kV. Low Frequency (Wet): 110 kV. Impulse Critical Flashover (Positive): 140 kV. Maximum Radio Influence Voltage at 500 kGz: <10 mV. Leakage Distance: 30.31". *** Discontinued ***

Category: Dead End Insulators

Stirrup Assembly, 336.4 KCMIL, 4.50 IN L, 5.46 IN W, 4/0 AWG Bail Size

Category: Guy Wire Clamps

SAWZALL® Nail Embedded Wood Blades, Length: 9", TPI: 5, Shank: 1/2" Universal, 25 Pack (Bulk)

Category: Bi-Metal Reciprocating Saw Blades

Inductive Proximity Sensor Head, E51, Top Sensing, Unshielded, .94 Inch Sensing Range, Alternate Frequency, Programmable NO Or NC Operation, Detects All Metal, Needs Body and Receptacle To Complete Units

Category: Inductive Proximity Limit Switch Sensor Heads

180MC-12-B is designed to be mounted in the top channel of a metal entry/exit door. Brown

Category: Security Switch Magnets

CDY MSS912 HANGERSTRAP

Category: Conduit Hangers From Wire/Rod & Beam

Eaton Freedom Series IEC Starter, E-frame, Horizontal mounting, Three-phase, 110/120 VAC, 50/60 Hz, Reversing, C306 bi-metal overload relay, 25A, Interchangeable heater, Side mounted auxiliary contact

Category: IEC Open Motor Starters

CDY 3TW BACKING NUT

Category: Vertigo Screw Anchors

J-PRO Cable support system, with screw-on beam clamp for use with flanges up to 1/2 (12.7mm) thick, 0.75 (19.0mm) max. bundle capacity, nylon 6.6 with metal attachments, black, 50 pc. package quantity.

Category: J-Hook From Wire/Rod & Beam

BRA 76198 TAGS 25/PACK (1 = 25 TAGS) 3" X 5-3/4" SIZE WITH 3/8" METAL GROMMET TAGS HAVE SELF-ADHESIVE CLEAR OVERLAMINATE FLAP WHICH IS PRESSED OVER THE FACE OF THE TAG FOR PERMANENT PROTECTION TAG IS ECONOMY POLYESTER

Category: Personal Protective Equipment (PPE) Signs & Labels

Eaton definite purpose contactor, Quick, 50A, 24 Vac, 50/60 Hz, Open with metal mounting plate, 15-50A, Contactor, Two-pole, 65A, Box lugs (posidrive setscrew) and quick connect terminals (side-by-side), Non-reversing

Category: 2-Pole Definite Purpose Contactors

Wiremold audio/video interface plates (AVIP) allow for A/V connectivity in all Wiremold A/V compatible pathways. AVIP Series Device Plates are metal and have screwed-down connectors, which ensure a secure connection that cannot be easily pulled-out or disconnected while in use. Available in data, audio, and video versions, AVIP Series Device Plates help you stay connected in meeting and training rooms, collaboration spaces, or work areas.Microphone connections are now available with Switchcraft

Category: Poke-Through Mounting Plates

Abb; Pushbutton; Modular; Actuator: Extended; Size: 029 Mr Width X 029 Mr Heightx 033 Mr Depth; Operating Temperature: -25 To +70 Deg C; Function: Momentary; Bezel Material: Chrome Metal; Iit Publishing Status: Level 0 - Information Enabled; Illumination: Illuminated; Endurance: Mechanical: 2 Million Cycles

Category: 22mm Extended Pushbutton Operators

Definite Purpose Control Contactor, Non-reversing, Four-pole, 25a, 24 Vdc, Openwith Metal Mounting Plate, Screw/pressure Plate And Quick Connect Terminals (side-by-side), 25a Ifl, 35a Rl

Category: 4-Pole Definite Purpose Contactors

Standard Round Knockout Punch Unit 3-1/8" (79.4 mm). Round standard metal punch units are complete units consisting of punch, die and draw stud. Use with battery-powered, hydraulic, ratchet or manual drivers. Properly assembled through pilot holes, they will make clean, fast and accurate holes.

Category: Knockout Punches

Limit Switch Operator, E50, Accessory, Roller on reverse side, Used with side rotary, Metal

Category: Fixed Roller Limit Switch Operators

Indenting machine with 3/16" (4.77mm) character wheel, 11.25" (286mm) x 16.25" (413mm) x 11.75" (298mm), 41 lbs. (18.6 kg)

Category: Portable Label Printers

<p>1/2"" (12mm) high extension. Used to increase height of preset or afterset. Die cast construction. Attach to preset or afterset with push on metal sleeves (included). Cannot be stacked.</p>

Category: Recessed Floor Box Service Fittings

Fs/fd 2 Gang Cover Sheet Steel Surface Pb

Category: PVC Coated FS & FD Device Box Covers

FS/FD 2 GANG COVER ROUND SH STEEL

Category: PVC Coated FS & FD Device Box Covers