"5sy6106-7 siemens industry inc"

Pro Folding Hex Key Set With Extended-Reach Blades Approximately 3-1/2-Inch To 4-1/2-Inch Long For Greater Reach, Includes 31 Sizes: 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 1/2-Inch, 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12 mm, T6, T8, T9, T10, T15, T20, T25, T27, T30, And T40, Effortlessly Adjust Key Tightness Or Looseness With The Convenient #2 Phillips Fastener, High-Leverage Blades Open Independently Up To 270 Degrees, Hex-Key Ends Are Square-Cut For A Secure, Full-Depth Fit And Maximum Contact With The Socket To Prevent Slippage And Stripping, Reinforced Nylon Handle Has A Sturdy, Comfortable Grip, Blades Are Made Of Tough, Heat-Treated Alloy Steel And Range From Approximately 3-1/2-Inch To 4-1/2-Inch Long Coated To Prevent Rust, Openings On The Sides Of Case Provide Unimpeded Access To Outer Keys

Category: Screwdriver Sets

Heavy Duty Screwdriver, Length: 13-7/16", Shank Length: 8", Slotted Keystone Tip (3/8")

Category: Flat Blade / Slotted Keystone Tip Screwdrivers

Screw-Holding Screwdriver, Shank Length: 7", Phillips (#2).

Category: Screw-Holding Screwdrivers

7-in-1 Twist-a-Nut™ Screwdriver/Nut Driver, Includes: Phillips (#1, #2), Slotted (1/4", 3/16"), Nut Driver (1/4", 5/16")

Category: Combination Screwdriver/Nutdrivers

7-Piece Screwdriver Set, Slim Electronic, Includes: Cabinet (3/32", Shank Length: 2-1/2"), Cabinet (3/32, Shank Length: 3"), Cabinet (1/8", Shank Length: 4"), Cabinet (1/8", Shank Length: 6"), Cabinet (5/32, Shank Length: 4"), Cabinet (5/32, Shank Length: 6")

Category: Screwdriver Sets

21-in-1 Twist-a-Nut Ratchet Screwdriver, Includes: Slotted (3/16", 1/4", 5/16"), Phillips (#1, #2, #3), Nut Drivers (1/4", 5/8", 7/16"), Square (#1, #2), Star (#15, #20, #25, #30), Hex (3/32", 1/8", 3/16", 3/32"), Wire-Nut® Connector Wrench, Wire Looping H

Category: Ratcheting Multi-Bit Screwdrivers

6-in-1 Multi-Tool Screwdriver, Length: 7-1/8", Includes: Slotted (3/16", 1/4"), Phillips (#1, #2), Hex (5/16", 1/4")

Category: Multi-Bit Screwdrivers

Screw-Holding Screwdriver, Shank Length: 7", Slotted (1/4")

Category: Screw-Holding Screwdrivers

Insulated 7 Unit Screwdriver Kit, 1000 Volt

Category: Insulated Screwdrivers

7-Piece Screwdriver Set, Includes: Keystone (1/4", Shank Length: 4" Square), Cabinet (3/16", Shank Length: 6"), Keystone (5/16", Shank Length: 6"), Phillips (#2, Shank Length: 4"), Cabinet (1/4", Shank Length: 6"), Cabinet ( 3/16", Rotary Shank Length: 6"

Category: Screwdriver Sets

7-Piece Screwdriver Set, Includes: Cabinet (3/16", Shank Length: 4"), Cabinet (3/16", Shank Length: 6"), Keystone (9-1/4", Shank Length: 4") Cabinet (1/4", Shank Length: 4"), Keystone ( 5/16", Shank Length: 6"), Phillips (#1, Shank Length: 3"), Phillips (

Category: Screwdriver Sets

Screw-Holding Screwdriver, Overall Length: 11-1/8", Shank Length: 7", Phillips (#2)

Category: Screw-Holding Screwdrivers

Multi-Bit Screwdriver Features Convenient On-Board Storage of 26 Different Precision Bits And A 3.5 mm Nut Driver, Includes Bits Needed To Repair Most Apple® Products, Barrel Contains Powerful Rare-Earth Magnets For Securing Bits And Fasteners, Industrial-Strength, Double-Sided Bits Are Conveniently Housed In The Handle, Eliminating The Need For A Bulky Bit Block Or Case, Stainless Steel Barrel Provides Great Impact And Wear Resistance, Spin Cap For Optimum And Precise Control, Cushion-Grip Handle For Maximum Comfort, Includes Phillips #000, #00, #0, #1, #2; Slotted 1, 2, 2.5, 3; Hex 0.9, 1.3, 1.5; Hex Security 2, 2.5; TORX® T3, T4; TORX® Security T5H, T6H, T7H, T8H, T10H; Standoff; Pentalobe 2, 5; Y000, Y0 Bits, Apple® Is A Trademark of Apple, Inc., TORX®Is A Registered Trademark of Acument Intellectual Properties, LLC.

Category: Multi-Bit Screwdrivers

Kraftform Kompakt 25 with pouch, 7 pieces

Category: Multi-Bit Screwdrivers

27-in-1 Multi-Bit Tamperproof Screwdriver, Nut Driver Sizes: 1/4'' (0.6 cm), Hex Bits: Tamperproof: 3/32'', 7/64'', 1/8'', 9/64'', 5/32'' (4 mm), 3/16'', 2 mm, 2.5 mm, 5 mm, 3 mm, TORX® Bits: Tamperproof: T7, T8, T10, T15, T20, T25, T27, T30, T40, Other Bits: TORQ-SET®: TS6, TS8, TS10; Tamperproof Spanner: SP4, SP6, SP8, SP10, Magnetic Bit Retention

Category: Multi-Bit Screwdrivers

Terminal Block Screwdriver. Over all length 7-3/4", Handle 3-3/4", Shank: 4", Tip 1/8"

Category: Terminal Block Screwdrivers

Rotary Screwdriver, Rapi-Driv, Length: 7-3/4", Shank Length: 4", Slotted Cabinet Tip (3/16")

Category: Crank Action Screwdrivers

11-In-1 Ratcheting Impact Rated Screwdriver And Nut Driver Includes 7 Screwdriver Bits And 4 Nut Drivers, Includes 11 Drive Ends: #1, #2 Phillips, 3/16-Inch, 1/4-Inch Slotted, #1, #2 Square, T25 Torx® And 1/4-Inch, 5/16-Inch, 3/8-Inch Power Nut Drivers, 1/2-Inch Standard Nut Driver, 1/4-Inch Quick-Connect On Power Nut Drivers To Easily Switch From Screwdriver Handle To Impact Driver, Collar Sets Ratchet Direction At Forward, Fixed And Reverse For Faster And Easier Driving, All Components Are Impact-Rated For Use With An Impact Driver (Not Included), Precision Machined Bit Tips Provide A Firm Hold And Reduce Cam-Out, Cushion-Grip™ Handle Allows For Greater Torque And Comfort, Torx® Is A Registered Trademark Of Acument Intellectual Properties, Llc

Category: Multi-Bit Screwdrivers

Adjustable Length Screwdriver: 4"-8", Includes: #2 Philips and 1/4" Slotted

Category: Multi-Bit Screwdrivers

Fixed Blade Demolition Driver Has A Complete Steel Tip-To-Cap Connection, Ensuring Toughness To Withstand Striking And Prying During Demolition Work, Equipped With A Square Shank Design, Allowing For Easy Wrench Assistance To Provide Extra Leverage And Torque, Heavy-Duty Flared Cushion-Grip™ Handle Prevents The Hand From Slipping And Adds A Layer Of Protection From Mis-Strikes, Oversized Metal Strike Cap For Hammering, Engineered, Manufactured And Tested For Prying And Chiseling, Includes 4-Inch (10 Cm) And 7-Inch (18 Cm) Long Blades For Added Versatility, Two Keystone Tip Sizes, 1/4-Inch And 5/16-Inch Offer Versatile Widths For Precision Work Or Coverage Of Larger Areas

Category: Flat Blade / Slotted Keystone Tip Screwdrivers

KNI 98 20 55 SLOTTED SCREWDRI

Category: Insulated Screwdrivers

160 Iss/7 Screwdriver Set Kraftform Plus Series 100. With Reduced Blade Diameter And Smaller Handle Diameters

Category: Screwdriver Sets

6-in-1 Screwdriver Replacement Bits, Includes: Slotted (3/16", 1/4"), Phillips (#1, #2), Hex ( 5/16", 1/4")

Category: Multi-Bit Screwdrivers