"box partition"

WLK RC7CTCAA RC7 COVER AL FLA

Category: Assembled Poke-Through Units

WMD AMD8SHTCBK AMD8 SLIDE HOL

Category: Poke-Through Cover Assemblies

Drop-in rubber grommet for pass-through cabling. Set of two grommets (one grommet shown) in black.

Category: Assembled Poke-Through Units

Round One-Piece Receptacle Cover, Diameter: 3-3/8 Inch, Brass, Carpet Cover For Flush Service Floor Box

Category: Poke-Through Cover Assemblies

Poke-Thru, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Gray

Category: Poke-Through Cover Assemblies

WMD 8ATC2SN 8IN UNWIRED SURF

Category: Assembled Poke-Through Units

WMD 4ATP4RBK

Category: Assembled Poke-Through Units

6IN UNWIRED SURF STYLE ASSEMBLY AA

Category: Poke-Through Cover Assemblies

Single-gang device plate that will accept up to four (4) Legrand AVIP or Extron Electronics MAAP style plates. Fits in any one (1) of the three (3) gangs in the center compartment. Devices supplied by others.

Category: Poke-Through Mounting Plates

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Flush, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat.

Category: Poke-Through Cover Assemblies

Complete cover and stem assembly with combination 1 1/4" and 2" trade size threaded conduit openings and closure plugs. Finished color black

Category: Assembled Poke-Through Units

Unit includes four prewired 20A receptacles. Each duplex receptacle is wired as separate circuit. The duplex can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY) or brushed metal finishes in aluminum (AL), and brass (BS). Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA). Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC4 Series Poke-Thru Devices require a 4 (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC4 Assembled Unit-Brass Finish Flange Nonmetallic Colored Brass Slide Holder, 2-20A Duplex Standard or IG and Cat 6 Connectors.

Category: Assembled Poke-Through Units

WMD 4FFATC15BK-LJB 4-INCH FURNITURE FEED POKE-THRU ASSY LESS JBOX BLACK

Category: Assembled Poke-Through Units

6IN PRWRD FLUSH BRONZE ASSEMBLY

Category: Assembled Poke-Through Units

Multi-Service Assembled Poke-Thru Device Communication Adapter, For (2) 3/4 Inch Conduit Connectors, Non-Metallic

Category: Poke-Through Mounting Plates

Allows outer compartments to be adapted to accept any of the 68 device plates. One 68DB is required to mount two 68 device plates in each outer compartment.

Category: Poke-Through Mounting Plates

WMD 4MAAP 4IN EVO 1/2 GANG AU

Category: Poke-Through Cover Assemblies

Poke-Thru Device, Assembled, RC7 Series, Black Non-Metallic Cover, Includes 20 Amp Duplex Receptacle and (2) Cat 6 Keystone Connectors

Category: Assembled Poke-Through Units

Poke-Thru Device, Recessed, Assembled Unit, Metallic Cover, Color: Black (Die Cast). Recessed: 3-1/4". Diameter: 8". Depth: 16-3/4". Includes: (2) Duplex Receptacles (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade). For use with Carpet & Tile Applications

Category: Assembled Poke-Through Units

<p>Single-gang device plate used to blank off any one (1) of the three (3) gangs in the center compartment, when no devices are used.</p>

Category: Poke-Through Mounting Plates

Poke-Thru Insert Assembly, RC4 Series, No Cover w/ Disposable Plate, Device Type: (4) 20 Amp Receptacles, For Use with Tile, Carpet or Wood Flooring, Use with RC4C Cover Assemblies.

Category: Assembled Poke-Through Units

Poke-Thru Device, 6 Inch Diameter, Evolution Series, Cover and Stem are Pre-Assembled, Aluminum Cover

Category: Assembled Poke-Through Units

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Black with Black Flange. Diameter: 7-1/2 Inch. Depth: 9 Inch. Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Ortronics TracJack Mounting Bezel & (2) Ortronics Series II Communication Housing (Devices Sold Separately). For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

WLK 4ATCBK 4IN UNWIRED PT ASS

Category: Assembled Poke-Through Units