Recessed Floor Box Service Fittings

<p>1/2"" (12mm) high extension. Used to increase height of preset or afterset. Die cast construction. Attach to preset or afterset with push on metal sleeves (included). Cannot be stacked.</p>

Category: Recessed Floor Box Service Fittings

MudCap, For Use With RFB9/11 Series Floor Boxes, Metallic

Category: Recessed Floor Box Service Fittings

Used to separate services in the center and outer compartments. Includes one (1) center compartment and one (1) external compartment.

Category: Recessed Floor Box Service Fittings

PDSTL FITTING 11/4IN OPNG BOTH SIDE

Category: Recessed Floor Box Service Fittings

1" (25mm) I.D. grommeted hole two sides. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cubic inches (442ml) of capacity. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cu. in. (442ml) of capacity.

Category: Recessed Floor Box Service Fittings

Holds up to three (3) devices of power, communications or audio/video devices. Bracket accepts standard size (2 3/4" x 4 1/2" (70mm x 114mm)) device plates sold separately by others.

Category: Recessed Floor Box Service Fittings

For use with 10" [254mm] diameter hole. Cover and stem are pre-assembled together. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with an all aluminum cover (assembled) designed to sit on top of finished floor surface (carpet, tile, wood, concrete or terrazzo). Covers are available in the following powder coated finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two plated finishes: brass (PB)

Category: Recessed Floor Box Service Fittings

W-mold 437-11/2 Attaching Rin g

Category: Recessed Floor Box Service Fittings

Single-gang with one 1.562" (39.7mm) receptacle opening.

Category: Recessed Floor Box Service Fittings

<p>Attaching ring for Source I (preset or afterset) zinc die-cast. 4'' (102mm) O.D. 7/8'' ring depth.</p>

Category: Recessed Floor Box Service Fittings

Attaching ring for Source I (preset or afterset) zinc die-cast. 4" (102mm) O.D. 3 1/8" ring depth. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

Above Floor Service Fitting, Height 3 Inches, Width 5 Inches, Depth 3-3/8 Inches, 1 Inch Conduit Nipple, Aluminum, without Duplex Receptacle

Category: Recessed Floor Box Service Fittings

Single-gang device plate that will accept Decorator style devices such as 20A receptacles, GFCIs, 106 adapters or A/V devices. Fits in any one (1) of the shaded locations shown. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

RFB2 DEVICE PLATE W/ EXTRON AAP

Category: Recessed Floor Box Service Fittings

STL 641 P TAC BGE 641P TILE A

Category: Recessed Floor Box Service Fittings

STL 668S-6ORT 668S DATA PLATE

Category: Recessed Floor Box Service Fittings

Single-gang device plate that will accept up to four (4) Legrand AVIP devices or Extron® Electronics MAAP style plates. Fits into any one (1) of the shaded areas shown. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

For use with 10" [254mm] diameter hole. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with a disposable construction cover. Unit works with 10" Evolution cover assemblies (10CTC). All cover assemblies are sold separately and are available in the following finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two plated finishes: brass (PB) and satin chrome (SC).

Category: Recessed Floor Box Service Fittings

MULT SVC FTG BUSHED OPNG 2IN DIA

Category: Recessed Floor Box Service Fittings

WMD CAF3-PB BLANK POWER

Category: Recessed Floor Box Service Fittings

Attaching ring for Source I (preset or afterset) zinc die-cast. 4" (102mm) O.D. 1 1/8" ring depth. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

1" (25mm) I.D. grommeted hole one side. Blank plate other side. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cubic inches (442ml) of capacity. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cu. in. (442ml) of capacity.

Category: Recessed Floor Box Service Fittings

Accepts two (2) Wiremold CM Series Open System adapters (sold separately). NOTE: For use with RFB4E, RFB6, RFB6E Series Floor Boxes.

Category: Recessed Floor Box Service Fittings

Stl 664-wt Flrbx Int Wireway

Category: Recessed Floor Box Service Fittings