Search results

W-mold 437-11/2 Attaching Rin g

Category: Recessed Floor Box Service Fittings

Single-service fitting includes housing, base, two mounting frames, and mounting hardware. For use on 2" (51mm) IPS or PK Preset Systems. For PK activation, use in conjunction with FloorPort Partition Feed and PK Kit. Has 1/2" and 3/4" trade size conduit knockouts on each end. 53.3 cu. in. (906cm3) capacity.

Category: Recessed Floor Box Service Fittings

Used for floor coverings greater than 3/16" (4.7mm). This tile shim allows the finished cover assembly to be flush with the finished floor. Includes one (1) 1/16" (1.6mm), one (1) 1/8" (3.2mm) and one 1/4" (6.4mm) tile shim for 9/16" (14.3mm) of upward adjustment.

Category: Recessed Floor Box Tools

Holds up to three (3) devices of power, communications or audio/video devices. Bracket accepts standard size (2 3/4" x 4 1/2" (70mm x 114mm)) device plates sold separately by others.

Category: Recessed Floor Box Service Fittings

MULT SVC FTG BUSHED OPNG 2IN DIA

Category: Recessed Floor Box Service Fittings

Single-gang device plate that will accept up to four (4) Legrand AVIP devices or Extron® Electronics MAAP style plates. Fits into any one (1) of the shaded areas shown. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

Single-gang device plate that will accept Decorator style devices such as 20A receptacles, GFCIs, 106 adapters or A/V devices. Fits in any one (1) of the shaded locations shown. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

For use with 10" [254mm] diameter hole. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with a disposable construction cover. Unit works with 10" Evolution cover assemblies (10CTC). All cover assemblies are sold separately and are available in the following finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two plated finishes: brass (PB) and satin chrome (SC).

Category: Recessed Floor Box Service Fittings

RFB2 DEVICE PLATE W/ EXTRON AAP

Category: Recessed Floor Box Service Fittings

Attaching ring for Source I (preset or afterset) zinc die-cast. 4" (102mm) O.D. 1 1/8" ring depth. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

WMD CAF3-PB BLANK POWER

Category: Recessed Floor Box Service Fittings

Accepts two (2) Wiremold CM Series Open System adapters (sold separately). NOTE: For use with RFB4E, RFB6, RFB6E Series Floor Boxes.

Category: Recessed Floor Box Service Fittings

Accepts three (3) Extron Electronics MAAP Series devices (sold separately). NOTE: For use with RFB4E, RFB6 and RFB6E Series Floor Boxes.

Category: Recessed Floor Box Service Fittings

1" (25mm) I.D. grommeted hole one side. Blank plate other side. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cubic inches (442ml) of capacity. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cu. in. (442ml) of capacity.

Category: Recessed Floor Box Service Fittings

Nonmetallic sleeve attaches to structural decking and maintains 6" - 6 1/8" diameter cast in hole. Unit includes three (3) attachment legs, two (2) end caps and three (3) thumb screws.

Category: Recessed Floor Box Tools

For use with 10" [254mm] diameter hole. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with a disposable construction cover. Unit works with 10" Evolution cover assemblies (10CTC). All cover assemblies are sold separately and are available in the following finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two plated finishes: brass (PB) and satin chrome (SC).

Category: Recessed Floor Box Service Fittings

For use with 10" [254mm] diameter hole. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with an all aluminum cover (assembled) designed to sit on top of finished floor surface (carpet, tile, wood, concrete or terrazzo). Covers are available in the following powder coated finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two 10ATCPB plated finishes: brass (PB) and satin chrome (SC).

Category: Recessed Floor Box Service Fittings

2" IPS locking nipple for 525 and Multiplex Series fittings. 1 1/2" long. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

Receptacle opening 1 3/8" [35mm]. Fits into any one (1) of the shaded areas shown.

Category: Recessed Floor Box Service Fittings

WMD CAF3-CB BLANK COMMUNICATI

Category: Recessed Floor Box Service Fittings

Includes one (1) Ortronics Series II adapter and one (1) TracJack adapter.

Category: Recessed Floor Box Service Fittings

Has one 2" trade size knockout.

Category: Recessed Floor Box Service Fittings

Mounting Bracket for Evolution 8-Gang Floor Box

Category: Recessed Floor Box Service Fittings

Communication bracket with Ortronics AB2TJ TracJack and ABS2 Series II adapters included. Accepts Ortronics workstation connectivity

Category: Recessed Floor Box Service Fittings