"ab-10106rbg the austin co."

25 Amp, 1-Pole, Compact Definite Purpose Contactor, 600V Rated, Binding Head Screw & Quick Connect Terminals, 24V AC Coil. ***No Replacement Coils Available for the Compact Series***

Category: 1-Pole Definite Purpose Contactors

Toggle/Ratchet Relay works with PGM alarm control panels, door control, keypads and more. The RBR1224 is snap track mountable.

Category: Surface Mount Solid State Relays

CUTLER HAMMER CMBE4242B200TS, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

Industrical Control Transformer, 3PH 500KVA 480-240 provides a low and safe control voltage for the operation of electromagnetic devices, such as motor starters, contactors, solenoids, timers or other loads requiring above average voltage regulation when actuated.

Category: Dry Type - 333 - 750 KVA

C-H UTRS111BCH 100A METER SOC, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

For 881 PVC Floor Box. Kit complete with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapters, Ortronics Series II and TracJack adapters. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. Anodized Aluminum

Category: Round Recessed Box Covers

3M™ Scotchlok™ 40000 1 Hole Compression Lug is suitable for use on copper or aluminum conductors. The lug has a standard barrel that ensures a secure fit. Aluminum construction offers high conductivity and an electro tin plated finish resists corrosion. It is rated for 35 kV voltage applications.

Category: 1-Hole Aluminum Compression Lugs

3MÖ Cold Shrink QS-III 3/C Inline Armored or Non-Armored Cable Splices 5786A-MT, 5787A-MT and 5788A-MT are designed for splicing 3-conductor, armored and non-armored, shielded power cables. The kits are rated for use on 25/28 kV cables with conductor sizes from 1 AWG-1000 kcmil (50-500 mm¦)

Category: Medium Voltage Cold Shrink Splice Kits

3M™ Scotchlok™ 31000 1 Hole Compression Lug is for use with copper conductors only. The long barrel ensures a secure fit. Seamless copper construction offers high conductivity and an electro tin plated finish resists corrosion. It is rated for 35 kV voltage applications.

Category: 1-Hole Long Barrel Copper Compression Lugs

Kit Comes Complete With Adapter Ring To Secure Into The Boxes, 1-1/4 / 2" Concentric Screw Plug Closure Plug, Conduit Fittings Sold Separately By Others

Category: Round Recessed Box Covers

MCCB Series C: Handle Mechanisms, Through-the-Door Handle Mechanism, Rotary Handle, 12 in. Shaft, NEMA 4/4X, Used with N-Frame

Category: Molded Case Circuit Breaker Operating Mechanisms & Handle Shafts

Die-cast aluminum cover assembly. Cover assembly is available in the following powder coat finishes: black (BK), gray (GY), nickel (NK), brass (BS), bronze (BZ) and aluminum (AL) as well as plated brass (PB) and satin chrome (SC). 10CTC Series Cover Assemblies designed for use with 10STC and 10STCP Poke-Thru Stem Assemblies.

Category: Round Recessed Box Covers

Exterior-gang 1" trade size conduit service feed assembly. Designed to allow connection to 1" trade size conduit feed in one (1) of the four (4) exterior-gang locations.

Category: Recessed Floor Box Service Fittings

3M™ Scotchlok™ 40000 1 Hole Compression Lug is suitable for use on copper or aluminum conductors. The lug has a standard barrel that ensures a secure fit. Aluminum construction offers high conductivity and an electro tin plated finish resists corrosion. It is rated for 35 kV voltage applications.

Category: 1-Hole Aluminum Compression Lugs

ABB Replacement 110-120v 60 Hz Coil For A145 Through A185 And A145n4 Across The Linecontactors

Category: Starter & Contactor Replacement Coils

Wiremold® Ratchet-Pro™ Series Floor Boxes provide single- and dual-service capability in a variety of easy-to-install round floor boxes. These designs allow the flexibility for providing power, A/V or communication services to open-space areas in an aesthetic solution. Applications include malls, shopping centers, department stores, airports, hospitals, and office buildings. Ratchet-Pro™ Series Floor Boxes are cULus Listed for use in both on grade and above grade concrete construction.

Category: Round Recessed Box Covers

Install HMI components or add holes and cutouts to the Front Plate for Concept HMI Enclosure. This Replacement Front Plate for Concept HMI, CPFP3545 item fits 350x450mm with a material of Aluminum colored Lt Gray.

Category: Enclosure Back Panels

Complete with hexagonal service head. Service head has one 3/4" trade size threaded conduit hub and five rubber grommets. The service head includes scrub water gasket. Unit is supplied with one 1 1/4" and one 1/2" trade size conduit stem to feed power and communication services. Service head is not to be used as a junction box. All power connections must be made in a junction box below (not supplied). Colors available in painted gray (GY), and painted black (BK). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AFFTC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Assembled Poke-Through Units

Transformers, Low Voltage, Three Phase, Shielded, Kva Rating: 9 Kva, Taps: 115 Degree C, Winding Material: Mounting Holes In The Enclosure, Mounting: Ul-3r, Enclosure Type: 17.0 Height X 20.0 Width X 10.5 Depth Inch

Category: 9 KVA Dry Type Transformers

Self-sticking Vinyl Arrows Are Mounted On Easy-to-use Dispenser Cards. Made Ofdurable B-946 Material Withstands The Elements Indoors And Out. Style 4 Contains Four 1 1/8 X 7 Markers Per Card.

Category: Exit, Security, & Admittance Signs

Complete with hexagonal service head. Service head has one 3/4" trade size threaded conduit hub and five rubber grommets. The service head includes scrub water gasket. Unit is supplied with one 1 1/4" and one 1/2" trade size conduit stem to feed power and communication services. Service head is not to be used as a junction box. All power connections must be made in a junction box below (not supplied). Colors available in painted gray (GY), and painted black (BK). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AFFTC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

5100 Series Suspended Fan Forced Unit Heater, 25000W, 480V, can be mounted for horizontal or vertical discharge. Copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow. All units come equipped with automatic reset type limit controls to de-energize the heater should an over-temperature situation occur. Color: Beige/Brown

Category: Industrial Unit Heaters

Single Meter Socket, Ring, No Bypass, 4 Terminals, 200 Amp, 600 Vac, Oh Service,hub Provision Only, Service Ground Lug #14-2 Cu/al, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

Relay, Microprocessor-Based, Limits ArcFault Damage by Detecting the Light from an Arc Flash and Rapidly Tripping.

Category: Power Monitoring Relays