"ab-10106rbg the austin co."

With metric sizing, appealing design and a suit of accessories the MAS is a perfect global solution. This Single Door Enclosure Mild Steel, MAS with Plate, MAS1208030R5 item measures 1200x800x300mm with a material of Mild Steel color Light Gray.

Category: NEMA 12 Hinge Cover Junction Boxes

Clamp, RC Beam, Outer Diameter of Conduit or Pipe 4.500 Inch, Nominal Conduit Size 4 Inches, Malleable Iron, For Mounting Pipe or Conduit Parallel to the Beam

Category: High Temperature Wire Connectors

Used to separate services in the center and outer compartments. Includes one (1) center compartment and one (1) external compartment.

Category: Recessed Floor Box Service Fittings

Circ-a-w U227mtbpms15 200a mtskt&po, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - without Distribution

National Electric Code requires electrical distribution equipment to be rated as ôService Entranceö, wherever electrical power enters a building or other structure. Service entrance products are typically utilized on single-family residences and mobile homes. Midwest Electric offers a broad range of surface mount and pedestal units, factory assembled and wired. Pedestal units come standard with loop feed lugs to reduce installation time and labor expense. Service Entrance equipment is made of heavy, galvanized G-90 steel, preventing corrosion and fading., ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

Liquidtight Connector With External Grounding Lug, Insulated, 90°, 2-1/2 Inch, Malleable Iron, For Use With Liquidtight Flexible Metal Conduit.

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

The THLK3225 is a 3 pole plug-in kit designed to economically supply power to a subpanel. It is rated up to 225 A and can be used as a sub-feed or feed-thru lug.

Category: Load Center Sub-Feed Lug Blocks

GED TSF420CSCU 200A OH/UG SFC PNL, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

C-H MB816B150STD 1 IN TYPE BR, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

Meter Base, 200 Amp, 1-Phase, 4 Jaw, OH/UG, 350 MCM Lugs, Hub Opening, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

Bracket for vertical PDU mounting to the side of the4 postsracks (set of 2 brackets).

Category: Special Purpose Wire Duct

Allows padlocking of the breaker to prevent unauthorized operation FB1P8201

Category: Padlockable Circuit Breaker Handle Locks

The stainless steel type 304 tie mount uses 1 hole foldover mounting with a .25" (6mm) screw. It comes in packages of 100.

Category: Cable Tie Bases

Braided Expandable Sleeving, 1.25" diameter (31.8mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, black, Polyethylene Terephthalate, 200 ft. per reel.

Category: Braided Expandable Sleeving

Pre-printed Wire Marker Books are conveniently pocket-sized, containing wire labels printed on vinyl cloth. Markers are durable enough for up to 5 years outdoor UV Resistance, oil and abrasions. They can also be torn in half to label each end of the condu

Category: Wire Marker Booklets

Kit including two 4’ rods (8’ total) with one threaded J hook and one fixed bullet nose, Extra Flex Glow, 3/16" Diameter, Pale Green Luminescent

Category: Glow-In-The-Dark Fish Poles / Rods

Scotch« Tape 130C is a linerless 30 mil thick, premium grade, rubber splicing tape used for splicing and terminating cables and wires. It withstands temperatures up to 194 ¦F (90 ¦C) with emergency overload up to 266 ¦F (130 ¦C). The tape has excellent electrical and mechanical properties to provide moisture seal protection.

Category: Linerless Rubber Splicing Tape

Eaton main fusible switch, 800A, Aluminum, NEMA 3R, Overhead, Class T, Class L, 100 kAIC, Three-wire, Single-phase, Barrier kits: 400A-800A fusible switches: Bottom feed-3MFSBBK, Top feed-3MFSTB, 120/240V, (4) #3/0 AWG-750 kcmil, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Main Terminal Boxes

Short Barrel Copper Lug, one hole with peep hole, wire range of 6 AWG. Produced from high conductivity copper tubing. Allows easy inspection of the termination to assure complete cable insertion. Marked with die index and color coded blue. cULus Listed for 35KV maximum when properly installed.

Category: 1-Hole Copper Compression Lugs

App Stb150sr 1 1/2 Lt Kellums

Category: Liquidtight Strain-Relief Grips with Mesh

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 3 IN Outside Diameter, 1.73 IN Inside Diameter, 2 X 1-1/4 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, NEMA : FB-1, For Used To Reduce The Size Of A Knockout Or Slip Hole

Category: Reducing Washers

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type T Conduit Bodies

The Pan-Ty® cable tie mount in dark blue is used with standard or light heavy cable ties and applied with a #10 (M5) screw. It is 0.86" (22 mm) wide and made of metal-detectable polypropylene for indoor environments. It comes in packages of 100.

Category: Cable Tie Bases

The push rivet applied low profile cable tie mount in yellow with 0.196" (5.0 mm) hole keeps bundle close to mounting surface and installs with an integral rivet for a strong, secure installation. It is for indoor use only made of Nylon 6.6 and comes in p

Category: Cable Tie Bases