"nm2048-2 co"

For RPSFB, RFSFB-OG, and RPNFB floor boxes. Kit comes complete with (2) prewired 20A duplex receptables, (receptables can be wired as standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM series open system adapters (unloaded), Ortronics Series II and TracJack adapters. Modular jacks sold seperately.

Category: Round Recessed Box Covers

Includes 862 Series Floor Box, one 15A, 125V tamper-resistant brown duplex receptacle, and one 895 brass duplex receptacle cover for carpet. Order 862KIT when using in concrete floor.

Category: Assembled Recessed Round Boxes

For 881 PVC Floor Box. Kit complete with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Provided with Wiremold CM Series Open System unloaded adapters, Ortronics Series II and TracJack adapters. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2" (114mm) deep. Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. Anodized Aluminum

Category: Round Recessed Box Covers

Complete with hexagonal service head. Service head has one 3/4" trade size threaded conduit hub and five rubber grommets. The service head includes scrub water gasket. Unit is supplied with one 1 1/4" and one 1/2" trade size conduit stem to feed power and communication services. Service head is not to be used as a junction box. All power connections must be made in a junction box below (not supplied). Colors available in painted gray (GY), and painted black (BK). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AFFTC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Assembled Poke-Through Units

Complete with hexagonal service head. Service head has one 3/4" trade size threaded conduit hub and five rubber grommets. The service head includes scrub water gasket. Unit is supplied with one 1 1/4" and one 1/2" trade size conduit stem to feed power and communication services. Service head is not to be used as a junction box. All power connections must be made in a junction box below (not supplied). Colors available in painted gray (GY), and painted black (BK). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AFFTC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

Stainless steel blanking plate with threaded base for 3/4" (19.1mm) IPS.

Category: Round Recessed Box Covers

Two-compartment pole (one power, one communication with cross over below power devices). Nominal material thickness .040" (1.0mm). Length 10'5" (3.2m). Two 20A 125V duplex receptacles. One Ortronics Series II adapter. One Ortronics Series II dual Cat 5e insert, two blank inserts and labeling supplies. Maximum ceiling height 10'5" (3.2m).

Category: Steel Power Poles

Double Gang Plate, Use in center compartment only. Includes one Activate adapter.

Category: Recessed Compartment Box Device Plates

Poke-Thru Device Assembly, 8 Inch Diameter, Includes: (2) 20 Amp Duplex Receptacles, For Use With 8CTC2/8CT2 Covers

Category: Assembled Poke-Through Units

Steel, Special Nipple, 500, 700 Series. Thread: Female 3/8" Inside, Male 1/2" Outside. Galvanized.

Category: Metallic Raceway Connectors & Adapters

Non-Metallic, End Plate. Includes: (2) Outlet Identification Lables. Gray.

Category: Communication Module End Plates For Metallic Raceway

Unit is 15 1/2" [393.7 mm] and has one 15A gray duplex and one communication opening with adapter for Ortronics TracJack & Series II or Wiremold open system. NOTE: Accommodates surface thicknesses from 0.7" to 1.9" [18mm to 48mm].

Category: Work Surface Power Centers

4' Plugmold Plus Multioutlet Strip comprised of four 12 inches apart, GBA 20 Amp Finish - Ivory

Category: Commercial Grade Power Strips

Wmdgr120010 1/2" Pancake Molding

Category: Non-Metallic Overfloor Raceway

Accepts all standard tHREE-gang NEMA faceplates and keystone jacks. Twistouts on all four sides for PN03, PN05, and PN10 Series Raceways. Has 1/2" and 3/4" concentric trade size KOs, as well as rectangular KO for wall box mounting. Designed for use with Ortronics WiJack Wireless Access Point.

Category: 3-Gang Raceway Device Boxes

Flangless cover for use in tile or carpet installation. Die-cast aluminum assembly. Provided with one 1" trade size screw plug for power or communication type cabling and one combination 1 1/4" and 2" trade size screw plug for communication type cabling. Allows for feeding both power and communication cabling. NOTE: Add suffix TR to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. Gray

Category: Square / Rectangle Recessed Box Covers

Available in black (BK), gray (GY), painted brass (BS), and ivory (VY). NOTE: To abandon the RC4 Series Poke-Thru Device, the internal gasket, duplex receptacle, and communication modules must not be removed in order to maintain UL Classification. Also the stem must remain in the hole. Black

Category: Round Recessed Box Covers

5' Plugmold Plus Multioutlet Strip comprised of five 12 inches apart, GBA Finish - Ivory

Category: Single Circuit Tamper Proof Plugmold

1" IPS locking nipple for 525 and Multiplex Series fittings. 1 1/2" long. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

Complete with one 3/4" and one 1 1/2" trade size conduit adapters and closure plugs. Covevrs available in painted black (BK), gray (GY), brass(BS), nickel (NK), bronze (BZ), and forged brushed aluminum (AL). Use with the 4FFSTC15 insert to form a complete poke-thru assembly. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. 4FFATC Series Poke-Thru Devices require a 4" [102mm] diameter hole.

Category: Assembled Poke-Through Units

Complete with one 3/4" and one 1 1/2" trade size conduit adapters and closure plugs. Covevrs available in painted black (BK), gray (GY), brass(BS), nickel (NK), bronze (BZ), and forged brushed aluminum (AL). Use with the 4FFSTC15 insert to form a complete poke-thru assembly. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. 4FFATC Series Poke-Thru Devices require a 4" [102mm] diameter hole.

Category: Assembled Poke-Through Units

5' Nonmetallic Pancake Overfloor Raceway. Accepts up to 1/2" cable diameter. Black

Category: Non-Metallic Overfloor Raceway

W-mold Nm20gba12 Nonmetalic snapicoil 48'

Category: Single Circuit Non-Metallic Plugmold

Digital ammeter with LCD readout of current draw. Six 20A rear outlets. 6' (1.8m) cord. Receptacle center-to-center 1 1/2" (38mm).

Category: General Duty Power Strips