"twhs-187-6 industries, llc"

NSI NC-187-0 .187 X 3/8" NYLO

Category: Cable Straps

.312/156 Thin Wall Heat Shrink, 48 Inch Length, 600 Volt, Round, Polyolefin

Category: Thin Wall Heat Shrink

350-12AWG Polaris Black InsulatedSubmersible Pedestal Connector -6 port PolarisInsulated Submersible PedestalConnectors are manufactured from high strength 6061-T6 aluminum alloy, providing premium electrical and mechanical performance. Radial tipped set screws reduce conductor strand damage, and the range taking design allows for many sizes and types of conductors- all in one connector. Encapsulated in rubber with a nominal thickness of 125 mils. and high dielectric strength. Abrasion and chemical resistant. UV resistant. Will not support combustion. UL Listed 486B Wire Connector. Meets or exceeds ANSI C119.4 Class A specifications. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. For use with copper and/or aluminum cables.

Category: Connector Blocks - Submersible - One Sided Wire Entry

NSI IF22-187-2N 22-18 AWG FUL

Category: Wire Disconnect Adapters

NSI PL3/0-6 3/0-6 AWG UNINSUL

Category: Terminal Block Barrier Strips

Easy-Twist N-Type Twist-On Wire Connectors - Red Bag 22-6 AWG- 100 Count APPLICATIONS: Easy-Twist N-Type Twist-On Wire Connectors are made from Nylon 6/6 (Polyimide 66). They have a temperature rating of 221 degrees F. Their swept-back design provides firm and comfortable twisting. Inserted with fixed, square-wire springs which grabs wire quickly and firmly. Compact design is perfect for tight spaces. Color coded to industry standards. Pre-twisting of wire is not necessary. 1,000 volt maximum in fixtures and signs. For Copper Wire Only.

Category: Color Coded Twist On Wire Connectors

NSI F22-187-2N 22-18 AWG NYLO

Category: Female Nylon Insulated Wire Disconnects

16-14 AWG, .187 x .030 Tab Fully Insulated Female Nylon, 50/Pack

Cable Connector Block Replacement Sleeves for ITOG-6

Category: Copper Crimp Connectors

NSI F16-187-3N 16-14 AWG NYLO

Ratchet Drive Crimping Tool APPLICATIONS: Ratchet Drive Crimping Tool is for terminals from 6 to 1/0 AWG and insulated terminals from 22 to 8 AWG. Rugged, compact, and lightweight. Requires minimum effort due to ratchet action, ensuring an excellent crimp every time. FEATURES: TYPE: Insulated and ated ACTION: Ratchet INSULATED USE: Terminals 22 to 8 AWG USE: Terminals 6 to 1/0 AWG MANUFACTURER: NSi Industries PART NUMBER: RDC 1/0 UPC: 662381055309

Category: Hydraulic Crimping Tools & Cutting Heads

NSI F22-187-2V 22-18 AWG VINY

NSI F22-187-3V 22-18 AWG VINY

Polaris™ Insulated Multi-Tap Connector, 6 Port (Single Sided Entry), 350 MCM - 6 AWG, 600 Volt, Black, Plastisol

Category: Single Sided Entry Wire Connector Blocks

22-18 AWG, .187 x .030 Tab Fully Insulated Female Nylon, 50/Pack

Category: Wire Disconnect Adapters

Nema Panelboard Lug, Aluminum, 350 MCM-6 AWG, 1 Conductor, 1/2" Bolt Size, 600V

Category: 1-Conductor Aluminum Mechanical Lugs

Easy-Splice Wrap Around Gel Splice Kit - 500 MCM to 6 AWG - 10 Inch Easy-Splice wrap-around gel splice closure sleeves quickly insulate and seal buried electrical connections rated up to 1,000 volts. Engineered to handle direct burial and manhole applications, these splice enclosure sleeves are equally well suited for insulation and jacket repair. Simply wrap and snap the sleeve on any cable in the use range. The sealant gel in the sleeve seals on contact. The splice closure sleeve can be applied on all common compression connectors and low voltage cables, as well as in-line mechanical connectors. Qualified to ANSI C119.1-1986 for underground splicing. A minimum seal length is required on each side of the connector opening or jacket damage. Use this guideline for minimum seal distance: WAGS-4/0 Series: 1.50" each side WAGS-500 Series: 2.20" each side WAGS-750 Series: 3.00" each side

Category: Low Voltage Heat Shrink Splice Kits

NSI F16-187-3 16-14 AWG BARE

NSI IF22-187-3N-BULK 22-18 AW

NSI M16-187-2N

NSI M16-187-2N-BULK 16-14 AWG

NSI F22-187-2V-BULK 22-18 AWG

NSI F16-187-3V 16-14 AWG VINY

NSI F22-187-3 22-18 AWG BARE