"mps-400a-q-kit"

Mechanical Power Connection Kit (Hardwired), Includes End Seal, WGRD-H900

Category: Heat Cable Connection Kits

Current Transformer, Mounting Base, 400 Amp, 3 CT, OH/UG, 50 kAIC, Studs

Category: Current Transformer Mounting Bases

Main Lug Kit. (1) Lug with (2) Holes for (1) #6 - 600 kcmil or (2) 2/0 - 250 kcmil wire. For use with 1MP Type Meter Packs with 400 or 600 Amp Main Busq

Category: Group Metering Main Lug Kits

Fuse, 400 Amp, 500 Volt AC/DC, Traditional High Speed, Bolt On, Round Body, 200 kAIC/AC, 50 kAIC/DC

Category: Semiconductor Fuses

Fan-Out Kit, Fibers: 6, 24" Fan-Out Tubing, Color Coded 900um Buffer Tubes.

Category: Fiber Optic Fan Out Kits

400A AC/DC TightSight® Clamp Meter, UL Certified CAT III 600V, Measures 0-600 Amps AC/DC, Measures AC/DC Current, AC/DC Voltage, Frequency, Resistance, Continuity, Capacitance, Diodes, Temperature, Senses AC Voltage, Built-In Flashlight & Probe Tip Holder, Includes Soft Case, Test Leads, Batteries, And K-Type Thermocouple

Category: AC / DC Clamp Meters

400A INSULATED BRAIDED CONDUCTOR

Category: Flexibar

Neutral Kit, Used With 200 Amp General Duty, Heavy Duty Safety Switches (NEMA 1, 3R Enclosures).

Category: Safety Switch & Disconnect Neutral & Ground Kits

400 Amp, 600V, 3-Phase, 50 kAIC, 3-Wire, Current Transformer Mounting Base, Line Side: Stud - Load Side: Lug. CT Provisions: 3 ***Used Primarily by Utilities in OR (PP&L)***

Category: Current Transformer Mounting Bases

Wired Chime Kit, Includes: (1) Illuminated, Pushbutton (2 7/8"H x 1"W x 3/4"D), (1) 2-Note Chime, Color: White, Voltage: 16V AC, Surface Mount (9"H x 5"W x 2"D), and (1) Transformer, 120V Primary, 16V Secondary, 10VA.

Category: Wired Chime Kits

5" / 6" Recessed Can Light Conversion Kit. 50 lb. Weight Limit For Light Fixtures. 35 lb. Weight Limit For Ceiling Fan Supports.

Category: Recessed Lighting Can Conversion Kits

The Door Mounting Kit DPMP-EXT is a Ready-Made Kit of the DPMP-02 and CDPI-01.

Category: VFD Cabinet Panel Mounting Kits

10 Piece Electricians Hole Saw Kit, Ice Hardened, Includes: Hole Saws (7/8" (22 mm), 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2"), Arbors (49-56-7010, 49-56-9100), Drill Bit (49-56-8010), Adapter (49-56-6560), Spacer (49-67-0120).

Category: Hole Saw Kits

Mounting Foot Kit (Qty 4), Bulletin A80 (Accessories - Misc.), Size/Dims: fits Concept Enc, Material/Finish: Steel/zinc. ***Used to maintain UL and CSA for exterior mounting***

Category: Enclosure Mounting Bracket Kits

8 Piece Spade Bit Kit, Flat Boring, Quik-Lok, Length: 6", Includes: 3/8", 1/2", 5/8", 3/4", 7/8" (22 mm), 1", 1-1/8" & Case.

Category: Spade Bit Kits

400A 600V Class T 1 Pole Fuseblock with Box Lug

Category: Class T Fuse Blocks

Anchor Kit. Includes: (100) #10x1" Sheet Metal Square Drive Screws, (100) #122 Yellow Wing Anchors, (1) 1/4" Carbide Masonry Drill. *Dottie Part # 59207.*

Category: Sheet Metal Screw Anchor Kits

400A, 250VAC, 125VDC, Industrial & Electrical Fuses UL Class RK1 Duel Element Time Lag (Slo-Blow)

Category: Class RK1 Power Fuses

Neutral Kit, Used With 100 Amp Heavy Duty Safety Switches

Category: Safety Switch & Disconnect Neutral & Ground Kits

Disconnect Switch, Fused, Front Operated, 3-Pole,Class J, 400 Amp, 600 Volt AC, Including Terminal Bolt Kit as Standard. Handle and Shaft Not Included.

Category: Class J Finger Safe / Dead Front Fuse Holders

DPMP-02 Panel surface mounting kit; Panel surface mounting kit (With 3m CAT5 cable, No Panel, sold separately)

Category: VFD Cabinet Panel Mounting Kits

Wired Chime Kit, Includes: (2) Illuminated, Pushbutton (2 7/8"H x 1"W x 3/4"D), (1) 2-Note Chime, Color: White, Voltage: 16V AC, Surface Mount (9"H x 5"W x 2"D), and (1) Transformer, 120V Primary, 16V Secondary, 10VA.

Category: Wired Chime Kits

Class J Modular Knifeblade Fuse Block, 3-Pole, 400A, 600V, No Indication

Category: Class J Fuse Blocks

Fan-Out Kit, Fibers: 12, 24" Fan-Out Tubing, Color Coded 900um Buffer Tubes

Category: Fiber Optic Fan Out Kits