"12x12x6 3r"

Wireway, Seal Plate, Qr, Bulletin F10 (lay-in Type 12 Wireway), Size/dims: 6.00x6.00, Material/finish: Steel/zinc

Category: Wireway Tee Fittings

Type 12, Lift-off Cover Junction Boxes have easy access and house and protect electrical connections. This Lift-Off Clamp Cover Enclosure Type 12, A8066LP item measures 8.00x6.00x6.00 inches with a material of Steel colored Gray.

Category: NEMA 12 Lift-Off Cover Junction Boxes

90-Degree Wireway Elbow, Top Cover Perforated, Material: Stainless Steel, Dimensions: 6" x 6"

Category: Wireway Elbows

90-Degree Elbow, Top Cover Sloped Inward without Tabs, Material: Stainless Steel, Dimensions: 6" x 6"

Category: Wireway Elbows

Steel Feed Through, Closure Plate closes the end of a wireway run. This Closure Plate Feed-Through Wireway, F66WP item measures 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Closure Plates

Steel Feed-Through Elbows used for connecting wireway at 45-deg turns in industrial applications. This 45-Degree Elbow Feed-Through, F66WE45 item measures 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Elbows

Lay-In NEMA Type 12 Wireway Straight Section, 6.00x6.00x48.00, Gray, Steel

Category: Hinged Cover Wireway

Lay-In Type 1 Screw Cover Wireway, Straight Section, Size: 6 Inch Wide, 6 Inch Deep, 1 Foot Length, 16 Gauge Steel, Galvanized, No Knockouts

Category: Screw Cover Wireway

Lay-in Transposition for rotating open side 90 degrees retaining lay-in feature. This Transposition Sections CW, F66LKT item measures 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Transposition Sections

Layin, Telescope Fittings offer easily adjustable wireway lengths. No cutting or welding required. This Telescope Fitting Lay-In Hinged Cover, F66LA item measures 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Telescope Fittings

Wireway 90° Elbow, NEMA Type 12, Lay-In, Inside Opening, Steel, ANSI 61 Gray Acrylic Electrocoat Finish, 6 Inch x 6 Inch

Category: Wireway Elbows

Wire Trough, Hinged Cover, Size/Dims: 6" x 6" x 30", Material/Finish: Steel/Gray

Category: NEMA 12 Wire Trough

NEMA Type 12 Wireway Tee, Lay-In, Outside Top Opening, Steel, ANSI 61 Gray Polyester Powder Finish, 6 Inch x 6 Inch

Category: Wireway Tee Fittings

Feed-Through Telescope Fittings are for easily adjusting wireway lengths without cutting or welding. This Telescope Fitting Feed-Through, F66WA item measures 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Telescope Fittings

Feed-Through Nipples used between adjacent wireway sections or fittings adjusting wireway length. This Nipple Feed-Through Wireway, F66WN1 item measures 6.00x6.00x1.00 inches with a material of Steel colored Gray.

Category: Wireway Nipples

6X6X12 STRAIGHT SECTION / KO

Category: Screw Cover Wireway

Removable Hinge with Quick-Release Latch, Contoured, Type 12, 6 x 6 x 4 Inch, Gray, Steel

Category: NEMA 12 Hinge Cover Junction Boxes

Divides wireway into two or three compartments in washdown applications. This Barrier Kit 3-Compartment, F66BB3C item fits 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Barrier Kits

Lay-in Cross Fittings for routing cables in 4 directions where 4 branches are open on the same side. This Cross Fitting Lay-in Hinged-Cover, F66LC item measures 6.00x6.00 inches with a material of Steel colored Gray.

Category: Wireway Cross Fittings

Instrumentation Box, NEMA 12, Hinged Cover, 6 x 6 x 4 Inch, Steel/Gray

Category: NEMA 12 Hinge Cover Junction Boxes

HOF CT66PEFC45SS 45 PERF ELBO

Category: Wireway Elbows

90-Degree Wireway Elbow, Outside Cover, Material: Stainless Steel, Dimensions: 6" x 6"

Category: Wireway Elbows

Lay-in Galvanized Sweep Tees offers large radius turns when mounting to vertical or horizontal surfaces. This Sweep Tee LayIn Wireway, F66TGV item fits 6.00x6.00 inches with a material of Steel finish Galvanized.

Category: Wireway Tee Fittings

HYSHED SCREW COVER 12X10X6