"sicr20240b inforesight consumer products, inc"

ADPTR W/ O-RING MALE M20 FEM 1

Category: Metric Cable Gland Adapters

Cable Gland, 40S, NPT 1-1/4 Inch, Cable Diameter 1.22 - 1.50 Inch, Explosion-Proof/Dust-Ignitionproof, Aluminum

Category: Aluminum Cable Glands

Sealing IP Washer, M25, Nylon, For Use With Cable Glands

Category: Cable Gland Earth Tags

OZ-Gedney Type CT Service Entrance Head, 1-1/2 IN Hub, Length: 3-25/32 IN, 5-3/8 IN Width, 4-3/4 IN Height, Malleable Iron, Brass Screws In Hood, Phenolic Insulator, Finish: Hot Dip Or Mechanically Galvanized, Connection: Threaded, 3 X 3/4 IN, 2 X 19/32 IN, 1 X 7/16 IN Insulator Holes, Third Party Certification: UL File Number E-11857, Applicable Third Party Standards: UL 514B, For Rigid Conduit, IMC And EMT Conduit

Category: Service Entrance Caps - Metallic

Lockout Tagout, 6, Padlock Shadow Board Kit, 14" x 14".

Category: Lockout / Tagout Kits

APY HP-D72 72 WIPE DESPENSER

Category: Brooms, Rags, & Towels

Waterpipe Mallable Iron Ground Clamp for Wire Range 6 - 2, Water Pipe Size 1/2, 3/4, 1, or rebar 4 - 10

Category: U-Bolt Ground Clamps

EHC Service Entrance Cap, Aluminum Die Cast, 3/4 Inch, Clamp type

Category: Service Entrance Caps - Metallic

Grounding Busbar, Copper, 1/4" x 2" x 36"

Category: Bus Bars

Serrated Washer, M32 Metric, Stainless Steel

Category: Cable Gland Serrated Washers

Blanking Plug, 757 Series, 1 Inch NPT, Flameproof, Stainless Steel

Category: Metric Cable Gland Adapters

Cable Gland Adapter, Male/Female, M25 x 3/4 Inch NPT, Nickel Plated Brass, For Use With Cable Glands in Hazardous Areas.

Category: Metric Cable Gland Adapters

National Electric Code requires electrical distribution equipment to be rated as ôService Entranceö, wherever electrical power enters a building or other structure. Service entrance products are typically utilized on single-family residences and mobile homes. Midwest Electric offers a broad range of surface mount and pedestal units, factory assembled and wired. Pedestal units come standard with loop feed lugs to reduce installation time and labor expense. Service Entrance equipment is made of heavy, galvanized G-90 steel, preventing corrosion and fading., ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

CAD EGBA14412DD GRD BAR ASSY

Category: Bus Bars

CAD EGBA14408NN BAR GRD BUS 1

Category: Bus Bars

Permaground Copper U-Bolt Ground Clamp, Conductor Range 2/0-4 Sol, Pipe Size 1-1/2in, Ground Rod Sizes 1-5/8 to 1-7/8in, UL, CSA

Category: U-Bolt Ground Clamps

Extra Large Techwear Full Finger Unlined - Red

Category: Mechanic Gloves

Ground Clamp, Water Pipe: 1-1/4 to 2 Inch, Wire Range: 10 to 2 AWG, Connects Copper Ground Wire to Water Pipe/Copper Tubing/Ground Rods, Bronze

Category: Bare Wire Ground Clamps

Universal use for rebar, rods or pipes. It is approved for direct burial in earth and concrete.

Category: Rebar Ground Clamps

Half Facepiece Respirator with Cool Flow Exhalation Valve, Medium, 4-Point Quick Latch, Bayonet Connection

Category: Respirators

Solid Brass, compression connector for termination grounding electrode to load centers using a #6 ground wire. Provides strain relief for grounding electrode conductor

Category: Bonding Connectors

CRO BJ74

Category: Bonding Jumpers

Cable Gland Adapter, 737 Series, Male to Female, M20 Metric to 1/2 Inch NPT, Nickel Plated Brass For Hazardous Locations With Increased Safety and Flameproof

Category: Metric Cable Gland Adapters

Ground Rod Connector With Rotating Eye Bolt, Material: Bronze/Stainless Steel, Wire Size: 10 AWG (Solid) - 2 AWG (Stranded).

Category: Transformer Tank Ground Connectors