"f40cw/ew-3"

Bonding Jumper, 4" Movement, 3-1/2" to 4", 14" Long, Tinned Copper Braid

Category: Bonding Jumpers

Flat Washer, 3/4", Steel, Zinc Plated, Order of 1 Each = Pack of 25

Category: Zinc Plated Flat Washers

Sheet Metal Screw, # 12 x 3/4", Pan Head, Phillips/Slotted Combo Drive, Zinc Plated Steel

Category: Slotted / Phillips Combo Pan Head Sheet Metal Screws

Eaton PowerXL DM1 Series Micro Drive, Three-Phase, 400 V, 12 A, 7.5 HP, Internal EMC Filter, Internal Brake Chopper, Multi Segment LCD Display, IP20, ST0 SIL2 And Ethernet I/P, Modbus TCP Onboard

Category: 480 Volt AC Operated General Purpose Variable Frequency Drives

DIN Rail, High Rail - 30°, Slotted, DIN 3. Type: PR3.Z2 HR30 ALU. Material: Extruded Aluminum with prepunched 22.5mm feed through holes and prepunched mounting holes. Length: 1 Meter. H x W: 15mm x 35mm

Category: Asymmetrical Slotted DIN Rail

3 Ft. OM3 LC Patch Cord Pigtail Connector, Multi-Mode

Category: Fiber Pigtails

SIMPush 1/2" & 3/4" Rigid & IMC, Push Install Removal Tool

Category: Liquidtight Connectors - Accessories

Fuse, Class CC, Fast-Acting, Rejection, 3 -1/2 Amp, 600 Volt, 13/32 Inch x 1-1/2 Inch, Ferrule Terminal, Melamine Tube Cartridge, 200,000 Amp (Symmetrical) Interrupting Capacity

Category: Class CC Fuses

Ferrule, 3/0 AWG, 1.26" Length

Category: Non-Insulated Ferrules

Conduit Body, Type: C, FM8, Size: 3/4 inch, Material: PVC Coated Iron. Includes: Cover & Gasket.

Category: PVC Coated Type C Conduit Bodies

20 Amp, 120/277 Volt, 1HP at 120V or 2HP at 240V-277V, Extra Heavy-Duty Specification Grade 3-Way Toggle AC Quiet Switch, Industrial Grade, Grounding, Back & Side Wired, - White

Category: 20 Amp Industrial Grade Toggle Switches

ModPower End Unit, In Surface, Connect Up To Six Of Our Power Units Together To Create A System Of Power For Training Spaces, Workstations Or Flexible Spaces, (3) Straight Blade Tamper-Resistant Receptacles & (2) USB Ports (1 USB-A, 1 USB-C), 3 Ft. Cord Length, Magnesium

Category: Commercial Grade Power Strips

PSTX85-690-70 Softstarter For Max 690V Main Voltage &100 - 250V 50/60Hz Control Supply Voltage IEC Maximum of 85 Amp, 6 Inch Width, 12 Inch Height, 8 Inch Depth (Includes Lugs)

Category: Advanced Control Softstarters

9.00 - 12.50 FLA (Full Load Amps). MMP, 600V Rated, UL508, Trip Class: 10. Type MS325. Includes: Short Circuit Protection and Phase Failure Detection.

Category: Manual Rotary Motor Controllers

Two Low Voltage Openings. Ultra-Thin Stamped Steel Antique Brass Plated Flange Cover, Flush-To-Floor In-Use And Blank Cover, Installed UL Listed 20A Tamper-Resistant Decorator-Style Receptacle, Includes: (1) Slotted Cover, (2) Low-Voltage Keystone Holder Inserts, (2) Low-Voltage Blank Inserts, (2) Low Voltage Dividers, (1) Leveling Ring Assembly, (1) Blank Cover With Gasket, (1) 20A Tamper-Resistant Decorator-Style Duplex Receptacle & (3) #8-32 x 5/8" Long Screws

Category: Round Recessed Floor Boxes

1 N.O. Contact Block, 30.5 mm, 600V Rated, Base Mount, Non-metallic, Standard Heavy-Duty, HT800 Series, Terminal Type: posidrive saddle clamp.

Category: 30mm Contact Blocks

Splice Plate, 90°, Flat, 3-Hole, Steel, Electro-Galvanized

Category: Flat Plate Strut Channel Connectors

Pin Terminals, Maximum Solid: 3, Maximum Stranded: 2, For Use Withr: Aluminum or Copper Conductors, Rated up to 35 kV

Category: Non-Insulated Pin Terminals

Narrow Slot Wiring Duct, Lead-Free PVC, Blue, Size: 1 Inch Wide, 3 Inch Deep, 6 Foot Long, .20" Slot Width, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Rigid Compression Coupling, 3-1/2 Inch, Concrete Tight, Malleable Iron/Steel, For Use with Threadless Rigid/IMC Conduit

Category: Rigid Compression Couplings - Iron

3 inch, 45° Insulated Liquidtight Connector, Malleable Steel.

Category: 45 Degree Steel Liquidtight Flex Connectors

Liquidtight Strain Relief Cord Connector, Straight, 3/8 Inch, Cable Range 0.187 - 0.312 Inch, Steel, For Use in Wet or Dry Locations

Category: Straight Steel Cord Grips

Rigid Strut Strap, Diameter: 3 Inch, Material: Steel, Finished: Hot Dipped Galvanized, For Use With Rigid/IMC Conduit

Category: Strut Channel Rigid Conduit Clamps

10 Wire Polaris 3/0 - 6 AWG Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks