"kp-aa96-480 etherwan systems, inc"

2A opening. Includes adapters for Ortronics TracJack, Series II, Wiremold CM2 Series inserts, Pass and Seymour Activate and other manufacturers.

Category: Large 2-Piece Metallic Raceway Cover Plates

Energi TriPak PowPak Load Controller, Relay module with Softswitch, 16A generalpurpose switch, 120/277V Vive enabled, BAA compliant

Category: Wireless Dimmers & Switches

Available in 5' (1.5m) length with 9" spacing. 15A tamper-resistant receptacles. 3-wire, #12 THHN (1 hot, 1 neutral and insulated ground conductor). .040" (1.0 mm) steel housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. USB is 2.4 Amps (shared between two ports) 5VDC. Please note the charging load on one module will not affect the charging performance of the other USB modules in the product. Finish - 304 Stainless Steel

Category: Single Circuit Tamper Proof Plugmold

Shallow Strut, Solid, 13/16" Height, 1-5/8" Width, 10' Long, Type 316 Stainless Steel

Category: Stainless Steel Solid Strut

2400D Series Right angle turns on same surface. Finish - Fog White

Category: Small 2-Piece Metallic Raceway Elbows

Set Screw Couplings, Use Two For Attaching In-Line Raceway Sections

Category: Plugmold Clips, Couplings, & Adapters

The cushion sleeving is for use with super-heavy cross-section ties, a custom-length banding system, or a mild steel strapping "U"-shaped channel design. The sleeving is .91" (23.1mm) wide and 100' (30.5m) long. It is black and made of neoprene, and it is

Category: Cable Tie Cushion Sleeving

Branch Termination. For use with Enphase Cabling System for Micro Inverters.

Category: Solar Micro Inverter Components

Eaton B-Line series Flextray wire basket tray, Steel, Hold down plate

Category: Cable Tray Mounting Hardware

90° Corner Kit, On Floor

Category: 2-Piece Non-Metallic Raceway

1 Inch Rigid Steel 30 Degree Elbow

Category: Rigid 30° Conduit Elbows

Eaton Z-Wave decorator switch, Decorator switch, 120V, Wiring leads, Push button, White, Three-way, Polycarbonate

Category: Passive Infrared Wall Switches

Wiremold audio/video interface plates (AVIP) allow for A/V connectivity in all Wiremold A/V compatible pathways. AVIP Series Device Plates are metal and have screwed-down connectors, which ensure a secure connection that cannot be easily pulled-out or disconnected while in use. Available in data, audio, and video versions, AVIP Series Device Plates help you stay connected in meeting and training rooms, collaboration spaces, or work areas. One Keystone Cat6 Jack.

Category: Poke-Through Mounting Plates

Closes off open end of 2400 Series Raceway. Fog White.

Category: Small 2-Piece Metallic Raceway End Fittings

Drop and Bracket Hanger, Material: Steel, Dimensions: 6" x 6"

Category: Wireway Support Hangers

For right angle turns on same surface. Cover stop permits neat butting of 2000C Cover. Two couplings included. Stainless Steel

Category: Plugmold Elbows

Vertical Rod Hanger Anchor, Material: Steel, Screw Size: 1/4 Inch, Shank Length: 3 Inch, Rod Size - Hangers: 3/8 Inch - 16, Head Diameter: 1/2 Inch, Point Type: 17, Application: For Installation in Wood Base Materials

Category: Wood Mount Threaded Rod Hangers

Decora Slide Dimmer and Fan Speed Control Color Change Kit, No Locator Light, For Use With DSE06, DS710, DSX10, DSX12, DSH06, DSH08 Dimmers and DSF01 Fan Speed Control - Black

Category: Dimmer Color Change Kits

Allows access to power and data on both sides of OFR48-4 4-Gang Device Box.

Category: Metallic Overfloor Raceway Device Boxes

MCCB Series G: Handle Mechanisms, Handle Mechanism Complete Kit, Red/Yellow, 12 in., NEMA 1/12/3R, IP 20/54/55, Used with EG-Frame

Category: Molded Case Circuit Breaker Operating Mechanisms

Wireway 90° Elbow-Tee-Cross, Size/Dims: 4.00x4.00, Material/Finish: Steel/Gray. For use with Type 1, Wireway .

Category: Wireway Elbow-Tee-Cross Fittings

Wireway Support Hanger, Material/Finish: Steel/Gray. For use with Type 1, Size/Dims: 6.00x6.00, Wireway .

Category: Wireway Support Hangers

BASELIGHT W516-51-E312-INC

LUMINAIRE SWP 1212-100 MH HPF CP BLK CAB LUMINAIRE LED INC ( MH 100W )