"f4p il2/0-5 f4p"

5 Inch Full Cone White Reflector, White Self-Flange Ring

Category: 5" Baffle Recessed Lighting Trims

Winter Grade Pulling Lubricant, 5-Gallon Pail, Cold Weather Use in Temperatures As Low As -20 Degree F (-30 Degree C)

Category: Pulling Lubricant

Shallow Strut, 9/16 Inch x 1-1/8 Inch Slotted Holes, Aluminum, 12 Gauge, Size: 1-5/8" Width, 1-5/8" Depth, 10' Length

Category: Aluminum Strut with Elongated Holes

Use-rhh-rhw-2/0-blk-str 1000

Category: Copper USE Direct Burial Wire

3M 5416A-4/0-AL QSIII SPLICE

Category: Medium Voltage Cold Shrink Splice Kits

3m(tm) Cold Shrink Qtii Outdoor Termination Kit 5642-4/0, 15 Kv, 0.84-1.38 In (21-35 Mm) Cable Insulation O.d.

Category: Medium Voltage Outdoor Cold Shrink

SIMpull Head® Pulling Device, 4/0 AWG, 30" Lanyard

Category: Cable Pulling Heads - Mechanical Style

SIMpull Head® Pulling Device, 1/0 AWG, 6" Lanyard

Category: Cable Pulling Heads - Mechanical Style

SIMpull Head® Pulling Device, 4/0 AWG, 12" Lanyard

Category: Cable Pulling Heads - Mechanical Style

SIMpull Head® Pulling Device, 1/0 AWG, 18" Lanyard

Category: Cable Pulling Heads - Mechanical Style

Use-rhh-rhw-1/0-blk-str 1000'

Category: Copper USE Direct Burial Wire

PDT UGB2/0-414-10 10 PORT UNI

Category: Load Center Neutral & Ground Bars

THB PKL66-1 COMP PIN TERM 4/0

Category: Non-Insulated Pin Terminals

Standard Single Gang 2 Port Faceplate, ABS 94V-0, White, 1/pkg

Category: Snap-In Wallplates

Hand-Operated Crimper, Installs #14 - 4/0 AWG, Permanent O and D3 Grooves, 4.5 Ton

Category: Wire Crimping Tools

Ideal; Heat Shrinkable Tube; Thermo-shrink?; Thin-wall; Shrink Ratio: 2:1; Outside Diameter: 1 In; Thickness: 031 In; Length: 100 Ft; Dielectric Strength: 20 Kv/mm For Astm D 150 Test Method; Volume Resistivity: 1014 Ohm Cm For Astm D 876 Test Method; Continuous Operating Temperature: -55 To 125 Deg C; Minimum Shrink Temperature: 70 Deg C; Heat Shock: No Cracking For Ul 224(250 Deg C /4 Hours); Cable Range: 2/0 Awg - 500 Mcm; Nominal Recoveredi.d. (max.): 0.500 In; Expanded I.d. (min.): 143; Elongation At Break: 600 Pct For Astm D 638 Test Method; Elongation Of Break After Aging: 350 Pct For Ul 224 Test Method; Cold Bend Test (-55?c/4 Hours): No Cracking For Ul 224 Test Method; Copper Corrosion: Pass For Ul 224test Method; Chemical Resistance: Pass For Ul 224 Test Method; Longitudinal Shrinkage: 0 Plus Or Minus 5 Pct For Ul 224 Test Method; Eccentricity: 30 Pct For Ul224 Test Method; Normal Size: 1 In; Package: Spool

Fence Post Grounding Connector, U-Bolt, Copper Alloy, For Parallel or 90 Deg. Connection, Pipe Size: 3 Inch, 4 AWG to 2/0 AWG, For Copper Conductors Only, Suitable for Direct Burial

Category: U-Bolt Ground Clamps

Compression Lug, Straight, Standard Barrel, 2-Hole Mount, Copper, Un-Plated, For Code Copper Conductors, 3/0 AWG, 1/2 Inch Bolt Holes, 1-3/4 Inch Spacing, With Inspection ProbeVoltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 2-Hole Copper Compression Lugs

20 Amp, 277/480 Volt 3-Phase, NEMA L22-20R, 4P, 5W, Flush Mount Locking Receptacle, Industrial Grade, Grounding, V-0-MAX - Black.

Category: 20 Amp NEMA Twist Lock Single Receptacles

Resin Splice Kit, In-Line, Non-Shielded, Conductor Range: 2 AWG - 3/0 AWG, Maximum Conductor O.D.: 1.000", Maximum Connector O.D.: .625". For use with 1 kV to 5 kV Non-Shielded Conductors.

Category: Non-Shielded Resin Splices

Industrial Relays 300:5 1inW Donut

Category: 2-Pole Alternating Relays

Deep Cone Baffle Trim, Wet Location, Diameter: 5 inch, Color: White

Category: 5" Shower Recessed Lighting Trims

5/16 X 1/2 HEX HEAD CAP SCREWS GRADE 5 ZINC PLATED

Category: Hex Head Cap Screws

5-Port Insulated Multi-Tap Connector, Dual Sided Entry, Transparent Cover, Conductor Range: 350kcmil-6, L: 5.67", W: 2.25", H: 2.62"

Category: Dual Sided Entry Wire Connector Blocks