"FRS-8"

Ranger Strain Relief Straight Liquidtight Cord Connector, 1 IN Trade, 3/4-7/8 IN Openings, Die Cast Zinc

Category: Straight Die Cast Zinc Cord Grips

CEM AW-8 ADJ WRENCH

Category: Adjustable Wrenches

P35 & P35S 3/8" Staples

Category: Staple Gun Staples

Professional Rivet Tool, Uses 3/32", 1/8", 5/32", 3/16" Rivets

Category: Cordless Crimpers

2-8/10 Amp Class RK5 Dual-Element Time-Delay Fuse, 250V, Current-Limiting, Provides motor overload, ground fault and short-circuit protection

Category: Class RK5 Fuses

5/32" (4mm) x 1/8" Long Aluminum Rivet

Category: Wall Duct Panel Rivets

3-5/8 Inch Triangle Sanding Pad + Sandpaper Variety Pack, Includes (1) Sanding Pad, (3) 60 Grit, (3) 120 Grit & (3) 240 Grit Sheets

Category: Sanding Sheets

3-5/8 Inch Triangle Sanding Sheets, Includes (2) 60 Grit, (2) 120 Grit & (2) 240 Grit Sheets

Category: Sanding Sheets

8/10 Amp Class RK1 Dual Element, Time-Delay Fuse, 250V, LOW-PEAK, Current Limiting, 300,000A Interrupting Rating

Category: Class RK1 Power Fuses

10A 125V 1AG - 1/4" x 5/8" Glass, Fast Acting Fuse

Category: Electronic Fast Acting Fuses

MLB CP-ABK5/8 ANCHOR BOLT KIT

Category: RV Power Pedestal Accessories

8/10 Amp Pin Indicating Type Fuse, Dual-Element, Time-Delay, 250V

Category: Time Delay Midget Fuses

3A 125V 1AG - 1/4" x 5/8" Glass, Fast Acting Fuse

Category: Electronic Fast Acting Fuses

Right Angle Drill Driver, M12, Cordless, RPM: 0 - 800, Torque: 100 in-lbs, Voltage: 12V, Chuck: 3/8" Single Sleeve - Ratcheting, Weight: 2.43 lbs *** Bare Tool Only, Battery & Charger Sold Separately ***

Category: Cordless Heavy Duty Right Angle Drills

Hammer-Drill Bit, Rock Carbide, 2-Cutter, Length: 16", Diameter: 7/8" (22 mm), Shank: Spline.

Category: Spline Masonry Bits

Magnum Barrier Power Terminal Block, 600 V, 175 A, 3 Poles, 14-2/0 AWG, 8-2/0 AWG Wire, Thermoplastic

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Small Black Knob with Silver Inserts. Dial Plates are 0.40" Aluminum with 3/8" mounting hole. Used with all Models. H: 1.62" W: 1.50".

Category: Variable Frequency Drive Potentiometers & Switches

PST PS 1200 3-1/8 EG CLAMP

One Hole Clamp For O.d. Tubing,use With 1 5/8 Wide Channel

Controlled TR Duplex Receptacle, 2 Plug Control, WhiteMarked "Controlled" Duplex Receptacle, 15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, 2 Plug Controlled, Extra Heavy Duty, Tamper Resistant, Straight Blade, Industrial Grade, Self Grounding, Back & Side 8 Hole Feed-Thru, White

Category: 15 Amp Industrial Grade Receptacles

Fixed Temperature sensor, SPST, 6" leads Switch Action CLOSED above Activation Temperature Maximum Temperature 64° C / 147° F Activation Temperature Nom. 5° C (41.0° F) Max. 9° C (48° F) Min. 1° C (34° F) Max. Reset Temperature Max. 8° C (46.4° F) Min. 5° C (41° F) Tolerance +/- 4° C (+/- 7.2° F)

Category: Heater Temperature Sensors

OZ-Gedney Type EYD Vertical Drain/Sealing Fitting, Size: 1 IN, Malleable Iron Body, Seal Cover And Filler Plug, Stainless Steel Drain/Breather, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-3/4 IN Body Diameter X 4-3/8 IN Ove

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

OZ-Gedney Type SLG Sealing Locknut, Material of Construction: Steel, Finish: Zinc Plated, 5/16 IN Height, 2-3/8 IN Width, Size: 1-1/2 IN, 11-1/2 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA AP57250, Applicable Third Pa

Category: Gasketed Conduit Locknuts

Ridgid; Threading Machine; Power Drive; Pipe Capacity: 1/8 - 1-1/4 In; Motor: 1/2 Hp, Universal, Reversible Motor, Single-phase, 50/60 Hz, 115v (230v Available)'; Chuck: Ridgid Speed Chuck With Replaceable Rocker-action Jaws; Spindle Speed:57 Rpm; Cutter: Heavy-duty (2); Rear Centering Device: Cam-action Turns With Chuck; Voltage Rating: 115 V; Frequency: 50/60 Hz; Thread Type: Npt; Standard Equipment Parts: 300 Power Drive Only With Footswitch, No. 811a Universal, Quick-opening Die Head, 1/2 - 3/4 In Universal Alloy Die Set, 1 - 2 In Universal Alloy Dieset, No. 360 Cutter: Capacity: 1/8 - 2 In (3 - 50 Mm) Pipe, 1/4 - 7/8 In (6 - 20; Switch: Heavy-duty For/off/rev And Integral Foot Switch; Automatic Oiler Accessories: Gear Head Assembly With Oil Pump, Oil Pan Assembly, Oil Sprout, Supportbar, Necessary Connectors, One Gallon Of Nu-clear Thread Cutting Oil; Rod Threading Capacity: 1/4 - 1-1/2 In; Max. Geared Threader Capacity: 6 In; Accessories:42360 - Stand For 300 Power Drive, 83540 - Stand For 300 Power Drive Export, 42575 - Transporter (for Power Drives And Tristand Vises), 68815 - Carriage With No. 312 Lever, 42385 - Carriage Feed Lever, 10883 - Oiler With 1 Gallon Of Nu-clear Thread Cutti; Weight: 212 Lb

Category: Corded Threading Machines