"cpaas-ct4000-dual-5 chargepoint inc"

Kin B912-5/16 Spring Nut 5/16

Category: Strut Channel Spring Nuts

Safeway In-Line Commercial GFCI, Permanent Mount, Single Phase, Manual Reset, Molded NEMA 5-15 Tri-Tap, 15A, 120V, 2' Cord Length

Category: In-Line GFCI Devices With Molded Plug & Triple Tap Connector

nVent ERICO copper bonded rods combine the strength of steel for ease of installation and molecularly bonded copper, with roll threading process for long lasting corrosion resistance. 5/8" x 5' ground rod with 10 mil plating thickness.

Category: Copper Ground Rods

POW PS210-10SS 1 5/8" X 1 5/8" X 14

Category: Stainless Steel Solid Strut

Deep Strut - 9/16" x 1-1/8" Elongated Holes - 2" Centers, Steel, Pre-Galvanized, Size: 1-5/8" Wide, 1-5/8" High, 10' Long, 14 Gauge

Category: Steel Strut with Elongated Holes

ABB Orange, 5 Pole Type Jb10-5, 76 Amp Jumper Bar

Category: Terminal Block Jumper Bars

LED DUAL HEAD SECURITY LIGHT WH 3K MS

Category: Outdoor LED Flood Lighting

1 Amp, Class RK1, Dual Element, Time-Delay Fuse, 600 Volt AC, LOW-PEAK, Current-Limiting, 300 kAIC, 300 Volt DC, 10 Seconds (Minimum) Time-Delay at 500% Rated Current

Category: Class RK1 Power Fuses

Dual 75 VA, Multi-tap 480/277/240/208/120 to 24 Vac, UL Class 2, Metal Enclosure

Category: AC Power Supplies

Transformer, 96VA, 120 to 24 Vac, Circuit Breaker, Foot and Dual Threaded Hub Mount, 20" Secondary Wires

Category: Signaling Transformers

LOW-DECIBEL DUAL-FAN AND FILTER KIT FOR CUBE-IT WALL-MOUNT CABINET 120 CFM 31 DBA 230 VAC 50/16 HZ 6FT L (1.8 M) NEMA 6-15P POWER CORD BLACK INCLUDES 2 FANS AND 2 FILTERS

Category: Rack Cable Management Devices

Eaton Bussmann series FRS-R fuse, 600 Vac, 300 Vdc, 4/10A, 200 kAIC at 600 Vac, 20 kAIC at 300 Vdc, Non Indicating, Current-limiting, time delay, Ferrule end X ferrule end, Class RK5

Category: Class RK5 Power Fuses

Eaton Bussmann series FRS-R fuse, 600 Vac, 300 Vdc, 125 mA, 200 kAIC at 600 Vac, 20 kAIC at 300 Vdc, Non Indicating, Current-limiting, time delay, Class RK5

Category: Class RK5 Power Fuses

Eaton Bussmann series FRS-R fuse, 600 Vac, 300 Vdc, 6-1/4A, 200 kAIC at 600 Vac, 20 kAIC at 300 Vdc, Non Indicating, Current-limiting, time delay, Class RK5

Category: Class RK5 Power Fuses

Generator, Portable, 3600 Watt, 49 State/Canada, Gas, GP Series, 120 Volt AC, 30 Amp Rated, 212 cc, Pull Start

Category: Portable Generators

Tool Box, Flat Top, HxWxL: 13" x 6.375" x 17.25", Weight: 3.96 lbs, Capacity: 66 lbs., Color: Black

Category: Tool Boxes

Combination Hammer, 20V/60V, Cordless, RPM: 540, BPM: 3150, Impact Energy: 6.1 Joules, Voltage: 20/60V, SDS Hammer, Weight: 11.6 lbs, Includes: (1) DCH481 60V MAX* Combination Rotary Hammer, (1) 360° Side Handle, (2) FLEXVOLT® DCB609 Batteries (1) Fast Charger & (1) Kit Box

Category: Cordless Heavy Duty SDS Rotary Hammers

18 Gauge Shear Attachment, Cuts Up to 18-Gauge Material Including But Not Limited To: Sheet Metal, Corrugated Sheet Metal, Duct, Asphalt Shingles, Steel Mesh, Vinyl Siding, Wire, Plastics, Cardboard And Rubber 360° Swivel Head Allows For Maneuverability When Cutting, Works With Most 18-Volt And 20-Volt Impact Driver And Drill Tool Brands

Category: Cordless Shears

Hammer-Drill Bit, Rock Carbide, Length: 6", Diameter: 1/4", Shank: SDS.+.

Category: SDS Masonry Bits

Large Case, ToughSystem, HxWxD: 13" x 21" x 12", Weight: 9.5 lbs, Weight Capacity: 88 lbs

Category: Carrier Cases

Charger, Fast Charger, Power Requirements: 120V AC, Charge Time: Less Than 1 Hour, Compatible Batteries: 7.2V - 18V NiCd, NiMh & Lithium

Category: Multi-Voltage / Multi-Bay Battery Chargers

4-1/2" Cutting Wheel

Category: Cutting Wheels

Flexvolt Metal Cutting Reciprocating Saw Blades, 14/18 Tooth Pattern for fast cuts, TOUGH COAT Finish helps to reduce heat build up for efficient cuts, High Speed Steel Teeth for long life and durability.

Category: Heavy Duty Metal Cutting Reciprocating Saw Blades