Search results

OZG UNY-75A 3/4 IN ALUM UNION

Category: Explosion-Proof Type UNY Unions

1-1/4 IN ALUM UNION

Category: Explosion-Proof Type UNY Unions

OZ-Gedney Clip-On 170 Series Cover, 1-1/4 IN Hub, Form: 7, Screw-In Mounting, Stamped Steel Body, Zinc Electroplated Clips, Stainless Steel Screws, Finish: Pre-Galvanized Zinc, Connection: Clip-On, Third Party Certification: UL File Number E-18095, CS

Category: Steel Conduit Body Covers

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 1 IN, Connection: Male NPS Hub X Compression, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-15/16 IN Maximum Diameter X 1-3/16 IN Length, 9/16 IN Thread Length, Third Party Cert

Category: Rigid Compression Connectors - Iron

OZ-Gedney Type FSC Shallow Cast Device Box, Number Of Outlet: 2, Gray Iron, Size: 1 IN, Ridge Top Construction, Cable Entry: (2) 1 IN Hubs, 21 CU-IN Capacity, No, 2-15/16 IN Width, 2-3/8 IN Depth, 4-11/16 IN Height, Finish: Zinc Electroplated With Aluminum Enamel, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification A-A-50563, NEMA : FB-1, For Rigid Conduit And IMC

Category: 1-Gang Malleable Iron FS & FD Device Boxes

1-1/2 IN 45 DEG CONN LFMC

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type 1 Threaded Conduit Locknut, Material of Construction: Aluminum, 3/8 IN Height, 4-1/4 IN Width, Size: 3 IN, 8 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA 009795 And 067549, Applicable Third Party Standards

Category: Aluminum Conduit Locknuts

3/4 IN ALUM LR COND BODY

Category: Type LR Iron Conduit Bodies

OZ-Gedney Type SE Watertight Service Entrance And UF Cable Connector, Size: 3/4 IN, Conductor Range: 0.275 IN X 0.475 IN - 0.400 IN X 0.610 IN (Oval Grommet), Malleable Iron Body, PVC Grommet, Steel Compression Washer, Finish: Zinc Electroplated Bo

Category: Iron NM Cable Connectors

OZG SR-950-250 1/2" 90D STN

Category: 90° Malleable Iron Cord Grips

Reducing Washer, 3-1/2" x 2", Steel

Category: Reducing Washers

OZG 28-075T 3/4" SSCR RGD CN

Category: Iron Rigid Conduit Set Screw Connectors

Ozg T50a 1/2 Alum T Cond Body

Category: Type T Aluminum Conduit Bodies

OZ-Gedney Type 25 - 38 C Duplex Connector, Size: 3/8 IN (1/2 IN KO), Connection: Male NPS Hub X Set Screw, Conductor Range: 7/32 - 17/32 IN, Malleable Iron, Finish: Zinc Plated, Dimensions: 1-1/16 IN Length X 1-9/16 IN Width, 7/16 IN Thread Length, Th

Category: Double Barrel MC / AC Connectors

Conduit Locknut, Trade Size 2-1/2 Inch, Diameter 3.54 Inch, Thickness 0.39 Inch, Material Aluminum, Installation 8 TPI Threaded, Approval UL 514B, CSA C22.2, Applicable Standard W-F-408E, NEMA FB-1, Application Used Where there is a Concern with Fasteners Becoming Loose, Used On IMC/Rigid Conduit

Category: Aluminum Conduit Locknuts

OZ-Gedney Spec 5 Type C Conduit Body, 4 IN Hub, Length: 18-3/8 IN, 5-1/2 IN Width, 5-5/8 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 3 (350 MCM) Conductors, 320 CU-IN Volume, Third Party Certi

Category: Type C Iron Conduit Bodies

OZ-Gedney Type 4Q Liquid Tight Straight Connector, Size: 3-1/2 IN, Connection: Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, 4-7/8 IN Width, 3-1/2 IN Height, Third Party Certification: UL File Number 11853, CSA 009795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, Hazardous Locations: Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

OZ-Gedney Type C Conduit Body, 4 IN Hub, Length: 18-1/8 IN, 5-1/2 IN Width, 5-5/8 IN Height, Sand-Cast Copper-Free Aluminum, Finish: Aluminum Enamel, Connection: Tapered FNPT, 3 (350 MCM) Conductors, 320 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, Hazardous Locations: Class 1, Division 2, Per NEC section 501-4(B), NEMA : FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type C Aluminum Conduit Bodies

Liquidtight Connector, 90°, 3/8", Malleable Iron, For Metallic Liquidtight Conduit, UL 514-B, CSA C22.2, APPLICABLE STANDARD FEDERAL SPECIFICATION WF-406E, NEMA; APPLICATION HAZARDOUS LOCATION; ENVIRONMENTAL CONDITIONS OIL TIGHT,

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type RB Reducing Bushing, Size: 4 X 2-1/2 IN, Malleable Iron, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 1-1/2 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Groups B, C, D, Class I, Zone 1, 2, Groups IIA, IIB + H2, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 009795, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 And 505, For Threaded Rigid Conduit And IMC

Category: Iron Alloy Reducing Bushings

OZ-Gedney Clamp Back, Size: 1-1/2 IN, 5/16 IN Thick, 1 Holes, Malleable Iron, Finish: Hot Dip Galvanized, Dimensions: 3-15/16 IN Length X 1-1/2 IN Width, 9/16 IN Hole, Dimension E: 19/32 IN X 23/32 IN, Third Party Certification: CSA 009795, Applicabl

Category: Clamp Backs - Iron

OZ-Gedney Clip-On 170 Series Cover, 1-1/2 IN Hub, Form: 7, Screw-In Mounting, Iron Body, Stainless Steel Screws, Zinc Electroplated Clips, Finish: Zinc Electroplated, Gray, Connection: Clip-On, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, For Form 7 Conduit Bodies

Category: Iron Conduit Body Covers

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 3-1/2 IN, 5-1/8 IN Outside Diameter, Length: 3-1/2 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification Number/CID A-A-50563, ANSI/NEMA : FB-1, For Rigid Conduit And IMC

Category: Iron Rigid Conduit Three Piece Couplings

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 3/4 IN, Connection: Male NPS Hub X Compression, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 1-9/16 IN Maximum Diameter X 7/8 IN Length, 7/16 IN Thread Length, Third Party Certification: UL File Number E-11853, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For Threadless Rigid Conduit

Category: Rigid Compression Connectors - Iron