"led dimmer switches"

IOTA Constant Power Emergency LED Driver: 120-277VAC, 50/60Hz, Output: 10-55VDC Class 2 Compliant, 1.0A (@10VDC) - 0.18A (@55VDC), 10 Watts (constant), 1.4A. Operating Temp: 0° to 55° C, Self-Diagnostic / Self-Testing, Stainless Steel Switch. Acuity/IOTA CI Code: *285C6F

Category: LED Driver Emergency Power Supplies

Remote Field installable 10W Emergency driver kit: Use for FluxPanel SBP: Selectable LED flat panel / FluxPanel FPZ: FluxPanel Gen2 LED flat panel / NWL Wraparound LED / SDS LED Selectable Strip. Construction/Finish: Bodine BSL310C2WM; Die formed .0625” galvanized steel J box and J box cover, which includes both ¾” and ½” knockouts; ½" Chase nipple and nut; Die formed .0625” galvanized steel J box mounting bracket; Two-wire illuminated test switch (2W-ITS) and wall plate.

Category: LED Driver Emergency Power Supplies

LED Battery Back Up Emergency Driver, 9 Watt, Input Voltage: 120-277 Volt, Output Voltage: DC120-200V. 250V Max (Emergency Mode: 9W, Constant Power), Discharge time: 90 Minutes, 0-10V Dimming. Indoor Use Only. Halco BBU/EM9WU, 90313.

Category: LED Driver Emergency Power Supplies

LED Emergency Driver - Input Voltage: 120-277V AC. Operates an LED Load of up to 10W at nominal battery voltage for a minimum of 90 minutes. UL RECOGNIZED Factory Installation * (Indoor and Damp) Output Class 2 Compliant **BSL310 is field installable when used with the Philips EvoKit LED Retrofit Luminaire and installed by Licensed Electrician** See pg. 6 of Wiring Diagram .pdf **

Category: LED Driver Emergency Power Supplies

LED Emergency Driver - Input Voltage: 120-277V AC. Matal Case with Conduit. Operates an LED Load of up to 10W at nominal battery voltage for a minimum of 90 minutes. Listed to UL924 and tested to CSA 22.2, No. 141 For Field or Factory Installation (Indoor and Damp) Output Class 2 Compliant **BSL310 is field installable when used with the Philips EvoKit LED Retrofit Luminaire and installed by Licensed Electrician** See pg. 6 of Wiring Diagram .pdf **

Category: LED Driver Emergency Power Supplies

2 Constant Power Emergency LED Driver, 10 Watts (Constant), 120-277VAC, 50/60Hz, 10-60VDC (Auto-Sense), Ni-Cad Battery

Category: LED Driver Emergency Power Supplies

10 Watt T8/Pin-Based Emergency Battery Back Up Kit, Type B Compatible

Category: LED Driver Emergency Power Supplies

Sure-Lites Constant Power LED Emergency Battery Pack, 14 Watts, 120-277V, LiFePO

Category: LED Driver Emergency Power Supplies

M4 Field Installable 40 Watt Emergency Battery Pack (Not For Use With Any Sensor Option)

Category: LED Driver Emergency Power Supplies

LED Reduced-Profile Emergency Driver Field Install Kit

Category: LED Driver Emergency Power Supplies

LED Emergency Driver, 6 Watt, 120-277 Volt Input, 15-54 Volt DC Output

Category: LED Driver Emergency Power Supplies

LED Emergency Driver, 15 Watt, 120-277 Volt, Emergency Inverter for Dimmable Type B TLED Lamps, Provides AC Emergency Output (120 VAC) Phase-Cut Dimming up to 12.5 VA

Category: LED Driver Emergency Power Supplies

IOTA Emergency LED Driver, Constant Power Performance At 10 Watt, Integral Non-Flex, 90-Minute Emergency Operation

Category: LED Driver Emergency Power Supplies

10 Watt Emergency LED Driver, Class 2 Output, Very Compact Low Profile Case, ABConnect and STSelect Equipped, Metal IP65 Bi-Color LED and Test Switch, 14.1” x 1.18” x 1"

Category: LED Driver Emergency Power Supplies

ACCESS

Category: LED Driver Emergency Power Supplies

LED Emergency Driver. Input Voltage: 120/277 Volts AC, 60Hz. Output Voltage: 120/277 VAC, 60Hz. Maximum Load Power (including AC ballast/driver): 100 Watts. SINE WAVE Emergency Lighting inverter with Dimming Capabilities

Category: LED Driver Emergency Power Supplies

Emergency Battery Backup for LED Products with Internal Drivers: Input Voltage: 120-277VAC, 50/60Hz, Output Power: 8 Watts / 170VDC. Dual Flex Conduit. Dimensions: L 12.76” x W 2.13” x H 1.57”. AKA: EM-H08170-LBF

Category: LED Driver Emergency Power Supplies

25W Micro-Inverter / Emergency Power Supply: Works with any fixture =150W for 25W of Constant Emergency Power for 90 minutes. UL listed and CEC Title 20 compliant. Dims luminaires of up to 150W down to 25W(45VA) in emergency with 0-10V dimming; 25W(45VA) max without 0-10V dimming. Fulham FHUPS1-UNV-25L-SD.

Category: LED Driver Emergency Power Supplies

Emergency LED Driver: Metal case, dual conduit on one end with lead wires in each conduit, and separate 2-wire ITS switch kit with wall plate. Universal Input Voltage: 120-277 VAC, 50/60 Hz, Output Voltage: 15-50 VDC, Output Power: 10.4 W (Maximum). Weight: 3.45 lbs.(1.57kg), Dimensions: 15.34” x 2.25” x 1.16” (mounting center - 15.0”). Compatible with AC drivers and LED loads rated for Class 2. Order no. BSL310CDFT1M, 12NC: 913702457201

Category: LED Driver Emergency Power Supplies

IOTA Constant Power Emergency LED Driver: 120-277VAC, 50/60Hz, Output: 10-55VDC Class 2 Compliant, 0.7A (@10VDC) - 0.13A (@55VDC), 7 Watts (constant), 1.4A. Operating Temp: 0° to 55° C, Self-Diagnostic / Self-Testing, Stainless Steel Switch. Acuity/IOTA CI Code: *286LFN

Category: LED Driver Emergency Power Supplies

LED 15W Phase-Cut Dimmable Inverter w/Emergency B/U: Metal housing with Conduit; 120 through 277v, Max output: 12.5va into load, 15.34" L x 2.25" W x 1.16" H. Compatible with dimmable Type -B TLED Lamps (up to 15w). • With the phase-cut dimming capability, it allows a lighting load with up to a 15W maximum input power to be dimmed to a 12.5VA maximum emergency output power. Philips PTB015B2UK45C1PDI1. 12NC 913702489501 / PEL00033P. *AKA: Bodine p/n BTB015B2UK45C1PDI1, 12NC 913702489301 / UPC #663015112283.

Category: LED Driver Emergency Power Supplies

LED 15W Phase-Cut Dimmable Inverter w/Emergency B/U: Metal housing with no conduit; 120 through 277v, Max output: 12.5va into load, 15.34" L x 2.25" W x 1.16" H, 12NC 913702489401 / PEL00032P. Compatible with dimmable Type -B TLED Lamps (up to 15w). • With the phase-cut dimming capability, it allows a lighting load with up to a 15W maximum input power to be dimmed to a 12.5VA maximum emergency output power. *Philips 12NC 913702489401- PTB015B2UK45L1PDI1.

Category: LED Driver Emergency Power Supplies

Emergency Battery Backup for LED Products with Internal Drivers: Input Voltage: 100-277VAC, 50/60Hz, Output Power: 25 Watts / 170VDC. Dual Flex Conduit. Dimensions: L 15.40” x W 2.13” x H 1.57”. AKA: EM-H25170-LBF

Category: LED Driver Emergency Power Supplies

LED Battery Pack, 14 Watt, 120-277V, Steel Housing ***Discontinued, See Sub***

Category: LED Driver Emergency Power Supplies