"di-24v-blbsc1-27-100 diode led"

LED Emergency Driver - Input Voltage: 120-277V AC. Matal Case with Conduit. Operates an LED Load of up to 10W at nominal battery voltage for a minimum of 90 minutes. Listed to UL924 and tested to CSA 22.2, No. 141 For Field or Factory Installation (Indoor and Damp) Output Class 2 Compliant **BSL310 is field installable when used with the Philips EvoKit LED Retrofit Luminaire and installed by Licensed Electrician** See pg. 6 of Wiring Diagram .pdf **

Category: LED Driver Emergency Power Supplies

2 Constant Power Emergency LED Driver, 10 Watts (Constant), 120-277VAC, 50/60Hz, 10-60VDC (Auto-Sense), Ni-Cad Battery

Category: LED Driver Emergency Power Supplies

LED Battery Back Up Emergency Driver, 9 Watt, Input Voltage: 120-277 Volt, Output Voltage: DC120-200V. 250V Max (Emergency Mode: 9W, Constant Power), Discharge time: 90 Minutes, 0-10V Dimming. Indoor Use Only. Halco BBU/EM9WU, 90313.

Category: LED Driver Emergency Power Supplies

IOTA Constant Power Emergency LED Driver: 120-277VAC, 50/60Hz, Output: 10-55VDC Class 2 Compliant, 1.0A (@10VDC) - 0.18A (@55VDC), 10 Watts (constant), 1.4A. Operating Temp: 0° to 55° C, Self-Diagnostic / Self-Testing, Stainless Steel Switch. Acuity/IOTA CI Code: *285C6F

Category: LED Driver Emergency Power Supplies

Sure-Lites Constant Power LED Emergency Battery Pack, 14 Watts, 120-277V, LiFePO

Category: LED Driver Emergency Power Supplies

10 Watt T8/Pin-Based Emergency Battery Back Up Kit, Type B Compatible

Category: LED Driver Emergency Power Supplies

IOTA Emergency LED Driver, Constant Power Performance At 10 Watt, Integral Non-Flex, 90-Minute Emergency Operation

Category: LED Driver Emergency Power Supplies

LED Emergency Driver for Origin Series High Bays: Input Voltage: 100-277VAC,50/60Hz; Output voltage range: DC25-54V, 60V max. Atlas ORHBEM16

Category: LED Driver Emergency Power Supplies

M4 Field Installable 40 Watt Emergency Battery Pack (Not For Use With Any Sensor Option)

Category: LED Driver Emergency Power Supplies

ACCESS

Category: LED Driver Emergency Power Supplies

6 WATT 90 MINUTE 100-277 VOLT LED EMERGENCY BACKUP DRIVER FOR USE WITH 4/6/8 OR 10 INCH CDL

Category: LED Driver Emergency Power Supplies

LED Reduced-Profile Emergency Driver Field Install Kit

Category: LED Driver Emergency Power Supplies

Emergency Battery Backup for LED Products with Internal Drivers: Input Voltage: 100-277VAC, 50/60Hz, Output Power: 25 Watts / 170VDC. Dual Flex Conduit. Dimensions: L 15.40” x W 2.13” x H 1.57”. AKA: EM-H25170-LBF

Category: LED Driver Emergency Power Supplies

LED Emergency Driver, 6 Watt, 120-277 Volt Input, 15-54 Volt DC Output

Category: LED Driver Emergency Power Supplies

LED Emergency Driver. Input Voltage: 120/277 Volts AC, 60Hz. Output Voltage: 120/277 VAC, 60Hz. Maximum Load Power (including AC ballast/driver): 100 Watts. SINE WAVE Emergency Lighting inverter with Dimming Capabilities

Category: LED Driver Emergency Power Supplies

8W Emergency LED Inverter, 100-277V, 90-Minute Emergency Runtime

Category: LED Driver Emergency Power Supplies

LED Emergency Driver - Input Voltage: 120-277V AC. Operates an LED Load of up to 10W at nominal battery voltage for a minimum of 90 minutes. UL RECOGNIZED Factory Installation * (Indoor and Damp) Output Class 2 Compliant **BSL310 is field installable when used with the Philips EvoKit LED Retrofit Luminaire and installed by Licensed Electrician** See pg. 6 of Wiring Diagram .pdf **

Category: LED Driver Emergency Power Supplies

Remote Field installable 10W Emergency driver kit: Use for FluxPanel SBP: Selectable LED flat panel / FluxPanel FPZ: FluxPanel Gen2 LED flat panel / NWL Wraparound LED / SDS LED Selectable Strip. Construction/Finish: Bodine BSL310C2WM; Die formed .0625” galvanized steel J box and J box cover, which includes both ¾” and ½” knockouts; ½" Chase nipple and nut; Die formed .0625” galvanized steel J box mounting bracket; Two-wire illuminated test switch (2W-ITS) and wall plate.

Category: LED Driver Emergency Power Supplies

LED Battery Pack, 14 Watt, 120-277V, Steel Housing ***Discontinued, See Sub***

Category: LED Driver Emergency Power Supplies

21W Emergency LED Inverter: Input; 100-277V AC, 50/60Hz, 120mA Max, 8W Max, Output; 21W Max, 150-200Vdc. Green Creative Product # 37935, Model # 21EMINVERTER.

Category: LED Driver Emergency Power Supplies

IOTA Emergency LED Driver, 120-277VAC Input Voltage, 55-200VDC Output Voltage, Constant Power Performance at 20 Watt, High Efficiency for CA Title 20, Self-diagnostic capability, High voltage output for non-class 2 LED loads (class 1 Output), Single Flex.

Category: LED Driver Emergency Power Supplies

40W Emergency Driver, Remote Mount, 120-347V White w/ Remote Included

Category: LED Driver Emergency Power Supplies

10 Watt Emergency LED Driver, Class 2 Output, Very Compact Low Profile Case, ABConnect and STSelect Equipped, Metal IP65 Bi-Color LED and Test Switch, 14.1” x 1.18” x 1"

Category: LED Driver Emergency Power Supplies

Emergency LED Driver: Hi-temp rechargeable Lithium–Ion; 120-277VAC Input, 5W Output Power. Suitable for use with select GREEN CREATIVE single ended bypass (BYP) or double end bypass (DEB) lamps only. See complete list on .pdf Catalog Page 2 in “COMPATIBLE LAMP MODELS” table.

Category: LED Driver Emergency Power Supplies