"lpl-eb-14w-v-40k"

400 Amp Class H One-Time General Purpose Fuse, 600 Volt

Category: Class H Fuses

225 Amp Class H One-Time General Purpose Fuse, 600 Volt

Category: Class H Fuses

Fuse, 1-1/4 Amp, Class CC, Time-Delay, Rejection, 13/32 Inch x 1-1/2 Inch, 600 Volt, Ferrule Terminal, Cartridge, 200,000 Amp (Symmetrical) Interrupting Capacity, CC-TRON

Category: Class CC Fuses

Fuse, Class CC, Fast-Acting, Rejection, 3/10 Amp, 600 Volt, 13/32 Inch x 1-1/2 Inch, Ferrule Terminal, Melamine Tube Cartridge, 200,000 Amp (Symmetrical) Interrupting Capacity

Category: Class CC Fuses

35 Amp Class K5 One-Time General Purpose Fuse, 600 Volt

Category: Class K Fuses

1-6/10 Amp Class K5 One-Time General Purpose Fuse, 250 Volt

Category: Class K Fuses

4 Amp Class K5 One-Time General Purpose Fuse, 600 Volt

Category: Class K Fuses

1-1/2 Amp Class K5 One-Time General Purpose Fuse, 250 Volt

Category: Class K Fuses

7 Amp Class H One-Time General Purpose Fuse, 600 Volt

Category: Class K Fuses

5 Amp Class K5 One-Time General Purpose Fuse, 600 Volt

Category: Class K Fuses

600 Amp Class H One-Time General Purpose Fuse, 250 Volt

Category: Class H Fuses

75 Amp Class H One-Time General Purpose Fuse, 600 Volt

Category: Class H Fuses

150 Amp Class H One-Time General Purpose Fuse, 250 Volt

Category: Class K Fuses

80 Amp Class H One-Time General Purpose Fuse, 250 Volt

Category: Class H Fuses

Eaton Bussmann series ECN-R Edison Fuse, 250 Volt AC, 125 Volt DC, 60 Amp, 200 kAIC at 250 Volt AC, 20 kAIC at 125 Volt DC, Non Indicating, Current-limiting, Time Delay, Ferrule end X ferrule end

Category: Class RK5 Fuses

NLN UL CLASS K5 ONE-TIME FUSE 110A. NLN series fuses provide low cost protection for general-purpose feeder and branch circuits when available short circuit currents are less than 50,000 amperes. They replace all Class H fuses which have only a 10,000 ampere interrupting rating. They are suitable for use in many residential and smaller commercial and industrial applications. NLKP series fuses are Canadian ôCodeö fuses specifically designed to meet Canadian Electrical Code Type P fuse requirements for residential use. They have a 10,000 ampere interrupting rating. However, to obtain the added benefits of time-delay, current-limitation, and higher interrupting rating, consider the use of POWR-PROÖ IDSR IndicatorÖ fuses for circuits between 250 and 600 volts. The user gets all the benefits of time-delay RK5 fuses plus the added benefits of an indicating fuse that tells when it has opened. Complete information on these fuses may be found in the POWR-PROÖ section of this catalog. For circuits up to 250 volts, see FLNR fuses in this section of the catalog. Applications: General purpose residential and commercial circuits with little or no motor load. Resistive heating loads. Economical: For use in applications where lowest initial cost is the major consideration. Safety: 50,000 A.I.R., Class K5 ù Adequate interrupting capacity for residences and many smaller facilities.

Category: Class K Fuses

KLKR UL CLASS CC FAST-ACTING FUSE .300A. KLKR series Class CC fuses are fast-acting fuses intended for general-purpose branch circuit protection. Their compact size, fast-acting overload response, and their highly current limiting design make them ideal for use in OEM equipment and control panels because. Solid-state devices such as SCRs and other electronic equipment generally require fast-acting protection. Compared to other UL Listed fuses, Class CC fuses are the most current limiting, rating for rating. Provide superior protection in a fraction of the space required by other fuse classes. For example, when 600 V three-pole, 30 A Class R fuse blocks are replaced by Littelfuse Class CC fuse blocks, panel-mounting space is reduced approximately 70percent.General purpose protection of equipment requiring fast overload protection û KLKR series, fast-acting fuses used for protection of equipment containing solid-state devices or other electronic components requiring fast response on overloads. 200,000 A.I.R. ù Reliable interruption of all overcurrents up to 200,000 amperes. Extremely current limiting ù Reduces damage caused by heating and magnetic effects of short-circuit currentsàstops damaging short-circuit faster than any mechanical protective device. Space Saving: Class CC fuses are the smallest 600V, 200,000 A.I.R. fuses approved for branch circuit protection.

Category: Class CC Fuses

Fuse, Amp-Trap 2000®, 600 Volt AC/DC, 20 Amp, Time-Delay, Class CC, ATDR Series

Category: Class CC Fuses

Fuse, Amp-Trap 2000-«, 600 Volt AC/DC, 3 Amp, Time-Delay, Class CC, ATDR Series

Category: Class CC Fuses

Fuse, Amp-Trap 2000®, 600 Volt AC/DC, 4 Amp, Fast Acting Class CC, ATMR Series

Category: Class CC Fuses

175 Amp Class H One-Time General Purpose Fuse, 250 Volt

Category: Class H Fuses

3/4 Amp Class K5 One-Time General Purpose Fuse, 250 Volt

Category: Class K Fuses

Fuse, Class CC, Fast-Acting, Rejection, 1/10-30 Amp, 600 Volt, 13/32 Inch x 1-1/2 Inch, Ferrule Terminal, Melamine Tube Cartridge, 200,000 Amp (Symmetrical) Interrupting Capacity

Category: Class CC Fuses

Eaton Bussmann series NON fuse, Non current limiting, Light duty circuit locations, 90 A, Class H, Non-indicating, Blade end x blade end, 50 kAIC at 125 Vdc, 10 kAIC at 250 Vac, Standard, 5, 250 V, 125 Vdc

Category: Class H Fuses