"u604rwhbx superior essex international lp"

Fuse, 6/10 Amp, Class CC, LOW-PEAK, Time-Delay, 13/32 Inch x 1-1/2 Inch, 600 Volt, Yellow Fuse, 200,000A Interrupting Rating

Category: Class CC Fuses

Fuse, 5-6/10 Amp, Class CC, LOW-PEAK, Time-Delay, 13/32 Inch x 1-1/2 Inch, 600 Volt, Yellow Fuse, 200,000A Interrupting Rating

Category: Class CC Fuses

Eaton Bussmann series LP-CC fuse, Current-limiting time-delay fuse, Rejection style, 4.5 A, Dual, CC, Non-indicating, Ferrule end x ferrule end, 12 sec at 200%, 20 kAIC at 150 Vdc,200 kAIC at 600 V, Melamine tube, 10, 600 V, 150 Vdc

Category: Class CC Fuses

UL CLASS G MEDIUM TIME DELAY 500A The unique design of LittelfuseÆs compact SLC series Class G fuses provide additional time-delay over competitive products which increases system reliability Compact Class G fuses were the first fuse series to approach midget fuse dimensions and meet NEC requirements for branch-circuit protection The unique dimensions of SLC series Class G fuses prevents insertion of lower voltage fuses in Class G fuse holders The fuseÆs varying length prevents insertion of higher ampere rated fuses in fuse holders designed for lower ampere ratings Class CC fuses are replacing Class G fuses in many new designs Class CC fusesÆ superior time delay plus higher voltage and interrupting ratings meet the needs of modern circuits LittelfuseÆs introduction of POWR-PRO« CCMR series fuses, with ratings up to 60 Amperes for providing branch circuit protection, are accelerating this trend Safety: 100,000 AIR ù Reliable interruption of all overcurrents up to 100,000 amperes Current limiting design reduces damage to equipment caused by heating and magnetic effects of short circuit currents Medium time-delay allows fuses to be sized closer to actual equipment requirements ù no need to greatly oversize to withstand harmless equipment or system surges Reduced Downtime: Medium time-delay may reduce downtime caused by power surges or equipment demands

Category: Class G Fuses

56 Amp, 600VAC, Industrial & Electrical Fuses Time Lag (Slo-Blow)

Category: Class CC Fuses

8 Amp, 600VAC, Industrial & Electrical Fuses Time Lag (Slo-Blow)

Category: Class CC Fuses

Fuse, 1-1/8 Amp, Class CC, LOW-PEAK, Time-Delay, 13/32 Inch x 1-1/2 Inch, 600 Volt, Yellow Fuse, 200,000A Interrupting Rating

Category: Class CC Fuses

6 Amp, 600VAC, Current Limiting Time Delay6 Amp, 600VAC, Industrial & Electrical Fuses, Current Limiting Time Delay

Category: Class CC Fuses

225 Amp, 600VAC, Industrial & Electrical Fuses Time Lag (Slo-Blow)

Category: Class CC Fuses

KLLU UL CLASS L TIME-DELAY FUSE 750A. KLLU series UL Listed, time-delay, Class L are quality fuses in every sense of the word. They were developed to provide a somewhat lower priced alternate to the POWR-PROÖ KLPC series fuses. KLLU series fuses meet or exceed all UL requirements for Class L fuses. For superior protection and performance, specification-grade POWR-PROÖ KLPC series fuses are the recommended fuses. Applications: Service switches. Switchboard mains and feeders.Bolted pressure contact switches. Motor control center mains. Large motor branch circuits. UL Listed series-rated protection for molded case circuit breaker panelboards and loadcenters. See panelboard manufacturerÆs literature for recommended fuse rating. Safety: 200,000 A.I.R. ù Provides reliable interruption of all overcurrents up to 200,000 amperes. When used for motor branch circuit protection, KLLU fuses may be sized close to the motor full-load current, providing excellent protection to branch circuit conductors, motor control equipment and motors. Longer Equipment Life: Current limiting ù Reduces short circuit damage to systems and equipment. Reduced downtime Ten second minimum time delay at 500 percent of rating eliminates needless downtime caused by heavy starting currents of large motors and other inductive loads. Selective coordination ù KLLU fuses coordinate well with other Class L fuses and with all current-limiting Littelfuse fuses rated 600 amps or less. This means less time spent trying to locate short circuits or overloaded equipment, because only the fuse immediately on the line side of the affected circuit opens. Easy to Use: 200,000 A.I.R. rating minimizes need for short circuit calculationsàmeets present and future system requirements. KLLU fuse time-current characteristics closely match typical time-current curves of circuit breakers. Although fuse/circuit breaker systems can seldom be 100percent coordinated , KLLU series fuses permit use of a wider range of breaker setting than fast-acting Class L fuses. Excellent protection for a single breaker or a group of breakers.

Category: Class L Fuses

Fuse, 1-4/10 Amp, Class CC, LOW-PEAK, Time-Delay, 13/32 Inch x 1-1/2 Inch, 600 Volt, Yellow Fuse, 200,000A Interrupting Rating

Category: Class CC Fuses

2-8/10 Amp Class CC Time-Delay Fuse, Current Limiting, LOW -PEAK Yellow, 600Vac, 300Vdc, 13/32" x 1-1/2", 200,000A Interrupting Rating

Category: Class CC Fuses

75 Amp, 600VAC, Industrial & Electrical Fuses Time Lag (Slo-Blow)

Category: Class CC Fuses

3.2 Amp, 600VAC, Industrial & Electrical Fuses Current, Limiting Time Delay

Category: Class CC Fuses

Fuse, Amp-Trap 2000®, 600 Volt AC/DC, 12 Amp, Time-Delay, Class CC, ATDR Series

Category: Class CC Fuses

KLKR UL CLASS CC FAST-ACTING FUSE .300A. KLKR series Class CC fuses are fast-acting fuses intended for general-purpose branch circuit protection. Their compact size, fast-acting overload response, and their highly current limiting design make them ideal for use in OEM equipment and control panels because. Solid-state devices such as SCRs and other electronic equipment generally require fast-acting protection. Compared to other UL Listed fuses, Class CC fuses are the most current limiting, rating for rating. Provide superior protection in a fraction of the space required by other fuse classes. For example, when 600 V three-pole, 30 A Class R fuse blocks are replaced by Littelfuse Class CC fuse blocks, panel-mounting space is reduced approximately 70percent.General purpose protection of equipment requiring fast overload protection û KLKR series, fast-acting fuses used for protection of equipment containing solid-state devices or other electronic components requiring fast response on overloads. 200,000 A.I.R. ù Reliable interruption of all overcurrents up to 200,000 amperes. Extremely current limiting ù Reduces damage caused by heating and magnetic effects of short-circuit currentsàstops damaging short-circuit faster than any mechanical protective device. Space Saving: Class CC fuses are the smallest 600V, 200,000 A.I.R. fuses approved for branch circuit protection.

Category: Class CC Fuses

20 Amp, 600VAC, Industrial & Electrical Fuses Time Lag (Slo-Blow)

Category: Class CC Fuses

1.6 Amp, 600VAC, Industrial & Electrical Fuses, Current Limiting Time Delay

Category: Class CC Fuses

Fuse, Amp-Trap 2000-«, 600 Volt AC/DC, 4 Amp, Time-Delay, Class CC, ATDR Series

Category: Class CC Fuses

2.8 Amp, 600VAC, Industrial & Electrical Fuses, Current Limiting Time Delay

Category: Class CC Fuses

1.4 Amp, 600VAC, Industrial & Electrical Fuses Time Lag (Slo-Blow)

Category: Class CC Fuses

Fuse, Amp-Trap 2000®, 600 Volt AC/DC, 20 Amp, Time-Delay, Class CC, ATDR Series

Category: Class CC Fuses

625 Amp, 600VAC, Industrial & Electrical Fuses Time Delay Fuse

Category: Class CC Fuses

Fuse, Amp-Trap 2000-«, 600 Volt AC/DC, 3 Amp, Time-Delay, Class CC, ATDR Series

Category: Class CC Fuses