Search results

Recessed Floor Box, 2 outlets, Box-Steel, Brass material, 5-3/4 Dia. x 4-3/8 in. Size, Silver/Gold, Bottom, Side cable entry, 18 cu.in cubic capacity, 1/2 (8 Side), 1/2 (1 Bottom) in. conduit hole, including 15 AMP (TR) Receptacle

Category: Assembled Recessed Round Boxes

Square Box Surface Cover, 7.5 Cubic Inches, 4-11/16 Inch Square x 1/2 Inch Deep, Galvanized Steel, For use with One Toggle Switch and One Duplex Flush Receptacle

Category: 4-11/16" Square Metallic Box Covers

Junction Box, NEMA 4X, Hinged, Window Cover, Quick Release, 17.5 x 14 x 8.53 Inch, Fiberglass/Gray

Category: Fiberglass Hinged Cover Enclosures

Communication bracket with four (4) RJ opening knockouts. Use as blank plate or for up to four RJ openings. Opening dimension is 9/16" x 3/4" (14.3mm x 19.1mm). NOTE: For use with RFB4-CI-1 only.

Category: Recessed Floor Box Service Fittings

Wall Bracket, 3 Openings, Accepts 4" and 5" Plaster Rings and 4" and 4-11/16" Square Boxes Mounted Horizontally or Vertically, Material: Steel. 1=25 Pieces.

Category: Enclosure Mounting Bracket Kits

TFP Optional Grilles and Replacement Filters, fits 6 in. Pkg, SS Type 304

Category: Cooling Fan Exhaust Grills

4 11/16 SQUARE 1 GROUND FAULT INTERR SURFACE COVER

Category: 4-11/16" Square Metallic Box Covers

Plasti-Bond GUA series conduit outlet boxes are installed in hazardous location conduit systems to serve as pull and splice boxes, to change the direction of a conduit run, to connect runs of conduit, or to provide access to conductors. They are provided with covers as standard. Inquire about special covers to allow use to mount lighting fixtures or as sealing fittings. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Explosion-Proof GUAB Conduit Outlet Boxes

Rob-r Pbds35 Fs/fd 1 Gang Cov

Category: PVC Coated FS & FD Device Box Covers

Floor Stand Kit, Height: 18 Inch, Material: Stainless Steel, Includes (2) Floor Stands.

Category: Enclosure Floor Stands

Accepts standard 15 Amp and 20 Amp Duplex Receptacles. NOTE: For use with RFB4-CI-1 only.

Category: Recessed Floor Box Service Fittings

DISCONNECT ENCL. 36.00X26.00X8

Category: NEMA 4 Wall Mount Enclosures

Communication bracket with Ortronics AB2TJ TracJack and ABS2 Series II adapters included. Accepts Ortronics workstation connectivity

Category: Recessed Floor Box Service Fittings

4" Diameter, Ceiling/Fixture Pan, Non-Metallic, Depth: 2-1/4". Cubic Inches: 20", Fixture Weight: 35 lbs.

Category: Round Non-Metallic Ceiling Pans

Angled Coupling, Tilt Forward, Bulletin Cs4 (compact? Suspension System), Size/dims: 8.15x4.33x4.33, Material/finish: Cast Alum

Category: Industrial Consolet Pedestals

NEMA Fast-Access Clamp Kit

Category: Enclosure Clip / Clamp Nut Packages

TFP Optional Grilles and Replacement Filters, fits 10 in. Pkg, SS Type 304

Category: Cooling Fan Exhaust Grills

BOW FN-CFB-VR DRAFTTIGHT CEIL

Category: Round Non-Metallic New Work Ceiling / Fixture Boxes

LED Light Kit, 1.34x1.26x13.82, Plastic

Category: Enclosure LED Light Packages

App Grla50 1/2 Unilet Type La

Category: Explosion-Proof LA Conduit Outlet Boxes

Junction Box, NEMA 4X, Hinged, Clear Window Cover, Quick Release, 9-1/2 x 6 x 5-1/2 Inch, Fiberglass/Gray

Category: Fiberglass Hinged Cover Enclosures

WMD EFB6M 6-GANG MODULE ASSEM

Category: Recessed Floor Box Service Fittings

APP 8487P 4-11/16" SQ PLENUM

Category: 4-11/16" Square Metallic Box Covers

Two Gang Square Cut Tile Wall Cover, 25.5 Cubic Inches, 4-11/16 Inch Square x 2 Inch Raised, Pre Galvanized Steel

Category: 4-11/16" Square Metallic Box Mud Rings