Skip to main content

"piwc-3-c industries, llc"

52 Found
NSI Tork
NSI Tork

Insulated Multi-Tap Connector, 2 Sided Entry, 2 Port, 6 to 3/0 AWG, Aluminum/Plastisol

Item #: 0264026
CAT #: IT-3/0
UPC: 662381950055
Company wide:
NSI Tork

Multi-Tap Connector, 6 - 3/0 AWG, Insulated

Item #: 0376722
CAT #: IPLD3/0-3
UPC: 662381927019
Company wide:
NSI Tork

Multi-Tap Connector, 3-Port, Insulated, Black, 6 AWG to 250 MCM, 2-Sided

Item #: 0264402
CAT #: IPLD250-3
UPC: 662381923011
Company wide:
NSI Tork

Insulated Multi-Tap Connector, 2-Sided, 3-Port, 6 AWG - 350 MCM

Item #: 0264417
CAT #: IPLD350-3
UPC: 662381924018
Company wide:
NSI Tork

3/0-6 AWG Polaris Insulated Tap Connector

Item #: 1435727
CAT #: IT-3/0C
UPC: 662381996428
Company wide:
NSI Tork

Insulated Multi-Tap Connector, 2-Sided, 3-Port, 4 AWG - 500 MCM

Item #: 0264428
CAT #: IPLD500-3
UPC: 662381925015
Company wide:
NSI Tork

3/0-6 Awg Polaris Insulated Multi-Tap

Item #: 1435700
CAT #: IPLD3/0-3C
UPC: 662381996480
Company wide:
NSI Tork

POLARIS Ins Multi-Tap 3/0 4 Port DSE

Item #: 0416567
CAT #: IPLD3/0-4
UPC: 662381927026
Company wide:
NSI Tork

Insulated tap

Item #: 1435701
CAT #: IPLD3/0-4C
UPC: 662381996640
Company wide:
NSI Tork

Multi-Tap Connector, Insulated, 3 Port, Dual Sided, 6 AWG - 600 MCM

Item #: 1435713
CAT #: IPLD600-3C
UPC: 662381996732
Company wide:
NSI Tork

Multi-Tap Connector, Insulated, 6 - 3/0 AWG, 2-Port, Opposite Sides, Black

Item #: 0264027
CAT #: ITO-3/0
UPC: 662381950062
Price good while supplies last
Company wide:
NSI Tork

Polaris Vision Tap Insulated Multi-Tap Connector

Item #: 1435702
CAT #: IPLD350-3C
UPC: 662381996602
Company wide:
NSI Tork

Polaris Vision Tap™ Insulated Multi-Tap Connector

Item #: 1435708
CAT #: IPLD500-3C
UPC: 662381996589
Company wide:
NSI Tork

POLARIS Mount Ins Multi-Tap 500 10 Port

Item #: 0250238
CAT #: IPLMD500-10
UPC: 662381945082
Company wide:
NSI Tork

250-6 Awg Polaris Insulated Multi-Tap

Item #: 1435696
CAT #: IPLD250-3C
UPC: 662381996497
Company wide:
NSI Tork

POLARIS Ins Multi-Tap 3/0 10 Port DSE

Item #: 0250177
CAT #: IPLD3/0-10
UPC: 662381927088
Company wide:
NSI Tork

NSI ITG-3/0B 3/0-4 AWG ( B,C,D) 2/0

Item #: 0250298
CAT #: ITG-3/0B
UPC: 662381959539
Company wide:
NSI Tork

POLARIS Mount Ins Multi-Tap 250 4 Port

Item #: 0136875
CAT #: IPLMD250-4
UPC: 662381943026
Company wide:
NSI Tork

POLARIS Mount Ins Multi-Tap 500 12 Port

Item #: 0250239
CAT #: IPLMD500-12
UPC: 662381945105
Company wide:
NSI Tork

Polaris™ Insulated Multi-Tap Connector

Item #: 0766537
CAT #: IPLD600-3
UPC: 662381789501
Company wide:
NSI Tork

Insulated Multi-Cable Connector Block, 250 - 750 MCM

Item #: 0272950
CAT #: IPLD750-3
UPC: 662381926012
Company wide:
NSI Tork

POLARIS Ins Multi-Tap 750 4 Port DSE

Item #: 0335870
CAT #: IPLD750-4
UPC: 662381926029
Company wide:
NSI Tork

750 - 250 MCM Polaris Vision Tap 3 Port

Item #: 1435715
CAT #: IPLD750-3C
UPC: 662381996855
Company wide:
NSI Tork

NSI IT-3/0B 3/0-6 AWG POLARIS INSUL

Item #: 0250287
CAT #: IT-3/0B
UPC: 662381953032
Company wide:
NSI Tork

Insulated Multi-Tap Connector, 2 Sided Entry, 2 Port, 6 to 3/0 AWG, Aluminum/Plastisol

Insulated Multi-Tap Connector, 2 Sided Entry, 2 Port, 6 to 3/0 AWG, Aluminum With Plastisol Insulation, CU/AL Rated
Item #: 0264026
CAT #: IT-3/0
UPC: 662381950055
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

Multi-Tap Connector, 6 - 3/0 AWG, Insulated

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 3, Wire Range: 6 AWG - 3/0 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.
Item #: 0376722
CAT #: IPLD3/0-3
UPC: 662381927019
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

Multi-Tap Connector, 3-Port, Insulated, Black, 6 AWG to 250 MCM, 2-Sided

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 3, Wire Range: 6 AWG - 250 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.
Item #: 0264402
CAT #: IPLD250-3
UPC: 662381923011
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

Insulated Multi-Tap Connector, 2-Sided, 3-Port, 6 AWG - 350 MCM

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 3, Wire Range: 6 AWG - 350 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.
Item #: 0264417
CAT #: IPLD350-3
UPC: 662381924018
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

3/0-6 AWG Polaris Insulated Tap Connector

IT-3/0C NSI Polaris Vision Tap (Clear) 3/0-6 AWG Polaris Insulated Tap Connector (Single Sided Entry)
Item #: 1435727
CAT #: IT-3/0C
UPC: 662381996428
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

Insulated Multi-Tap Connector, 2-Sided, 3-Port, 4 AWG - 500 MCM

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 3, Wire Range: 4 AWG - 500 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.
Item #: 0264428
CAT #: IPLD500-3
UPC: 662381925015
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

3/0-6 Awg Polaris Insulated Multi-Tap

IPLD3/0-3C NSI Polaris Vision Tap (Clear) 3/0-6 Awg Polaris Insulated Multi-Tap Conn 3 Port (Dual Sided Entry)
Item #: 1435700
CAT #: IPLD3/0-3C
UPC: 662381996480
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

POLARIS Ins Multi-Tap 3/0 4 Port DSE

Polaris™ Insulated Multi-Tap Connector, 4 Port (Dual Sided Entry), 3/0 - 6 AWG, 600 Volt, Black, Plastisol
Item #: 0416567
CAT #: IPLD3/0-4
UPC: 662381927026
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

Insulated tap

3/0 - 6 AWG Polaris Vision Tap™ Insulated Multi-Tap Conn 4 Port (Dual Sided Entry)
Item #: 1435701
CAT #: IPLD3/0-4C
UPC: 662381996640
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

Multi-Tap Connector, Insulated, 3 Port, Dual Sided, 6 AWG - 600 MCM

Multi-Tap Connector, Insulated, 3 Port, Dual Sided, 6 AWG - 600 MCM, Aluminum With Clear Plastisol Insulation
Item #: 1435713
CAT #: IPLD600-3C
UPC: 662381996732
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

Multi-Tap Connector, Insulated, 6 - 3/0 AWG, 2-Port, Opposite Sides, Black

Insulated Cable Connector Block for 2-Wires and In-Line Splicers/Reducers, 600V, Connections: Opposite Sides, Number of Ports: 2, Wire Range: 6 AWG - 3/0 AWG, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.
Item #: 0264027
CAT #: ITO-3/0
UPC: 662381950062
Category: Dual Sided Entry Wire Connector Blocks
Price good while supplies last
Company wide:
NSI Tork

Polaris Vision Tap Insulated Multi-Tap Connector

Polaris Vision Tap Insulated Multi-Tap Connector, 3 Port (Dual Sided Entry), 350 MCM - 6 AWG, 600 Volt, Plastisol, Clear
Item #: 1435702
CAT #: IPLD350-3C
UPC: 662381996602
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

Polaris Vision Tap™ Insulated Multi-Tap Connector

Polaris Vision Tap™ Insulated Multi-Tap Connector, 3 Port (Dual Sided Entry), 500 MCM - 4 AWG, 600 Volt, Plastisol, Clear
Item #: 1435708
CAT #: IPLD500-3C
UPC: 662381996589
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

POLARIS Mount Ins Multi-Tap 500 10 Port

10 Wire Polaris 500 MCM-4 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250238
CAT #: IPLMD500-10
UPC: 662381945082
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

250-6 Awg Polaris Insulated Multi-Tap

IPLD250-3C NSI Polaris Vision Tap (Clear) 250-6 Awg Polaris Insulated Multi-Tap Conn 3 Port (Double Sided Entry)
Item #: 1435696
CAT #: IPLD250-3C
UPC: 662381996497
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

POLARIS Ins Multi-Tap 3/0 10 Port DSE

10 Wire Polaris 3/0 - 6 AWG Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250177
CAT #: IPLD3/0-10
UPC: 662381927088
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

NSI ITG-3/0B 3/0-4 AWG ( B,C,D) 2/0

NSI ITG-3/0B 3/0-4 AWG ( BCD)
Item #: 0250298
CAT #: ITG-3/0B
UPC: 662381959539
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

POLARIS Mount Ins Multi-Tap 250 4 Port

4 Wire Polaris 250 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0136875
CAT #: IPLMD250-4
UPC: 662381943026
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

POLARIS Mount Ins Multi-Tap 500 12 Port

12 Wire Polaris 500 MCM-4 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0250239
CAT #: IPLMD500-12
UPC: 662381945105
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

Polaris™ Insulated Multi-Tap Connector

Polaris™ Insulated Multi-Tap Connector, 3 Port (Dual Sided Entry), 600 MCM - 6 AWG, 600 Volt, Black, Plastisol
Item #: 0766537
CAT #: IPLD600-3
UPC: 662381789501
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

Insulated Multi-Cable Connector Block, 250 - 750 MCM

Insulated Multi-Cable Connector Block, Wire Entry Either Side, 600V, Number of Ports: 3, Wire Range: 250 MCM - 750 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.
Item #: 0272950
CAT #: IPLD750-3
UPC: 662381926012
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

POLARIS Ins Multi-Tap 750 4 Port DSE

4 Wire Non-UL Polaris 750 - 250 MCM Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.
Item #: 0335870
CAT #: IPLD750-4
UPC: 662381926029
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

750 - 250 MCM Polaris Vision Tap 3 Port

750 - 250 MCM Polaris Vision Tap™ Insulated Multi-Tap Conn 3 Port (Dual Sided Entry)
Item #: 1435715
CAT #: IPLD750-3C
UPC: 662381996855
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
NSI Tork

NSI IT-3/0B 3/0-6 AWG POLARIS INSUL

NSI IT-3/0B 3/0-6 AWG POLARIS
Item #: 0250287
CAT #: IT-3/0B
UPC: 662381953032
Category: Dual Sided Entry Wire Connector Blocks
Company wide:
52 Items found