"2078709 black"

Harness Fir Tree Cable Tie Mount, Requires Panel Hole Diameter of .250" (6.5 mm) and Panel Thickness Between .03" to .14" (.9 mm to 3.4 mm), Heat Resistant Nylon 6.6, Black, Package of 1000

Category: Cable Tie Bases

Stud Cable Tie Mount, Installed Onto a 0.44" (11mm) Stud, Weather Resistant Nylon 6.6, Black, Package of 500

Category: Cable Tie Bases

Helawrap, Mounting Base with Adhesive, HWBASEA, PA66HIRHS, Black, 50/pkg

Category: Cable Tie Bases

Mini Ratchet P-Clamp, 0.15 - 0.31" Bundle Dia., M8 Hole Dia., PA66HIRHSUV/ST/ZN, Black, 1000/carton

Category: Cable Tie Bases

Mini Ratchet P-Clamp, 0.15 - 0.31" Bundle Dia., M6 Hole Dia., PA66HIRHSUV/ST/ZN, Black, 1000/carton

Category: Cable Tie Bases

Cable Tie Fir Tree Push Mounts, Length 7.4", Maximum Bundle Diameter of 1.88” (48mm) / Panel Hole Diameter Range of 0.18”–0.19” (4.6mm–4.9mm), Heat Stabilized Nylon 6.6 (Indoor Heat Resistant), Black, Package of 500

Category: Cable Tie Bases

Cable Tie Mount, Hi Temp. Adh., 1.5 x 1.5 Inch

Category: Cable Tie Bases

Four-Way and Two-Way Mounting Base With Open Leg Design, Black Nylon 6.6 for Temperatures up to 65 Degrees Celsius (149 F), Weather and UV Resistant, Length of 28.6mm (1.13 Inches), Width of 28.6mm (1.13 Inches), Height of 8.7mm (0.34 Inches),Self-Adhesive Mounting Method, 100 Pack

Category: Cable Tie Bases

Heavy-Duty Mounting Cradle, Black Nylon 6.6 for Temperatures up to 85 Degrees Celsius, Weather and Ultraviolet Resistant, Length of 44.45mm (1.75 Inches), Width of 19.1mm (0.75 Inches), Height of 15.9mm (0.626 Inches), for Use with Lashing Ties, Screw Mounting Method, #8 Screw

Category: Cable Tie Bases

Cable Tie Mounting Base, Black Nylon 6.6 for Temperatures up to 70 Degrees Celsius (158 F), Length of 19.05mm (0.75 Inches), Width of 19.05mm (0.75 Inches), Height of 5.21mm (0.205 Inches), Acrylic Adhesive Mounting Method, 100 Pack

Category: Cable Tie Bases

Medium Torque Cable Tie Mount, Mounting Hole Dia. 0.375", Max Torque 40.0 lb - ft, PA66HIRHSUV, Black, 500/pkg

Category: Cable Tie Bases

Four-Way Adhesive Mounting Base, Black Nylon 6.6 for Temperatures up to 65 Degrees Celsius (149 F), Weather and UV Resistant, Length of 28.6mm (1.13 Inches), Width of 28.6mm (1.13 Inches), Height of 5.7mm (0.22 Inches), Self-Adhesive Mounting Method

Category: Cable Tie Bases

Four-Way Adhesive Mounting Base, Black Nylon 6.6 for Temperatures up to 65 Degrees Celsius (149 F), Weather and UV Resistant, Length of 19mm (0.75 Inches), Width of 19mm (0.75 Inches), Height of 4.9mm (0.19 Inches), Self-Adhesive Mounting Method, Bulk Pack

Category: Cable Tie Bases

Four-Way and Two-Way Mounting Base With Open Leg Design, Black Nylon 6.6 for Temperatures up to 85 Degrees Celsius (185 F), Length of 28.6mm (1.13 Inches), Width of 28.6mm (1.13 Inches), Height of 8.5mm (0.33 Inches), Screw Mounting Method or Two-Component Glue, #8 Screw, Mounting Hole Size of 4.4mm (0.17 Inches), Bulk Pack

Category: Cable Tie Bases

The 4-way adhesive backed cable tie mount in black is mounted with acrylic adhesive tape. It is 1" long x 1" wide (25.4 x 25.4 mm) and made of weather-resistant ABS plastic. It is used with miniature, intermediate, and standard cable ties. It is designed

Category: Cable Tie Bases

The screw applied mount for Tak-Ty hook and loop cable ties in black uses #6 (M3) screw. It is 1.12" long x 1.12" wide (28.5 x 28.5 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with HL

Category: Cable Tie Bases

The 4-way adhesive backed cable tie mount in black is mounted with rubber adhesive tape. It is 1" long x 1" wide (25.4 x 25.4 mm) and made of ABS plastic. It is used with miniature, intermediate, and standard cable ties. It is designed for indoor environm

Category: Cable Tie Bases

Cable Tie Mounting Base, 4-Way, Self-Adhesive/Threaded Mount, .19 IN W Tie, Nylon/Polyamide 6.6, Black

Category: Cable Tie Bases

The lashing tie mounting clip in black is made of weather-resistant nylon 6.6. It is 1.38" long x 0.67 wide (35 x 17 mm). It is applied with a 1/4" (M6) screw and is designed for indoor and outdoor environments. It comes in packages of 100.

Category: Cable Tie Bases

MAGCTM10S NDFEB35/POM/ST BK 10/BG

Category: Cable Tie Bases

The extra heavy cable tie mount in black is applied with a 1/4" (M6) screw. It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in packages of 10.

Category: Cable Tie Bases

The cable tie mount in black is installed onto a .25" (6.4mm) stud. It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in packages of 100.

Category: Cable Tie Bases

Cable Tie Fir Tree Push Mounts Panel Hole Diameter of 0.34 to 0.36" (8.8 to 9.3 mm), Made of Heat-Stabilized Nylon 6.6, For Use In Outdoor Environments and With Miniature, Intermediate and Standard Cable Ties, Package of 1000

Category: Cable Tie Bases

The fir tree push mount assembly is black and requires a panel hole diameter of 0.25 to 0.28" (6.3 to 7.1 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 1

Category: Cable Tie Bases