"48-73-0023"

LED (UL Type B) Ballast Bypass Lamp, 10.5 Watt, 120-277 Volt, Bulb: T8, Length: 48 Inch, Base: Medium Bi-Pin (G13), Lumens: 1650, Beam Angle: 180, CRI: 80, Color Temperature: 5000K, Rated Life: Up to 70,000 Hours, NOTE: Double-Ended Ballast BYPass Installation, Wired at Both Ends, Utilizes Existing Lampholders, Shunted or Non-Shunted (must shunt). CC# 575498, 12NC 929002325234. Philips MainsFit (Ballast bypass / Type B)

Category: T8 Tubular LED Lamps

LED (UL Type B) Ballast Bypass Lamp, 12 Watt, 120-277 Volt, Bulb: T8, Length: 48 Inch, Base: Medium Bi-Pin (G13), Lumens: 1700, Beam Angle: 240, CRI: 82, Color Temperature: 3500K, Rated Life: Up to 50,000 Hours, NOTE: Double-Ended Ballast BYPass Installation, Wired at Both Ends, Utilizes Existing Lampholders, Shunted or Non-Shunted (must shunt). CC# 563494, 12NC 929002484104. Philips MainsFit (UL Type B) CorePro T8 LED, 12T8/COR/48-835/MF17/G 10/1.

Category: T8 Tubular LED Lamps

LED Lamp, T8, 48 Inch, 9.5 Watt, 1740 Lumen, 4100K, 80+ CRI, 120-277 Volt, 210° Beam Angle. Ballast required. Direct Replacement-for use on Instant Start and Rapid Start ballasts with no rewiring required. May not be compatible with every ballast. Satco S11742R1, 9.5/T8/LED/48-840/DR.

Category: T8 Tubular LED Lamps

LED HYBrid T8 Lamp, 15W, 120-277V, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), Lumens: 2200, CRI: 82, Color Temperature: 5000K (Warm White), Rated Life (L70): Up to 50,000 Hrs. NOTE: Suitable for use with 120-277V power or with existing ballasts* Suitable for damp locations and totally enclosed fixtures, Utilizes existing lamp holders – shunted or non-shunted. See .pdf Catalog Page for Wiring Diagrams. * This lamp may not work with all instant start ballasts. For detailed ballast compatibility information please visit www.greencreative.com.

Category: T8 Tubular LED Lamps

17 Watt T8 LED; 4Ft; 4000K; Medium Bi Pin Base; 50000 Average rated hours; 2200 Lumens; Type B; Ballast Bypass; Single or Double Ended Wiring

Category: T8 Tubular LED Lamps

LED Lamp, 13W, 120-277V, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), Lumens: 2050, CRI: 82, Color Temperature: 4000K, Rated Life: Up to 50,000 Hrs, Dimmable.

Category: T8 Tubular LED Lamps

LED Type-B Ballast Bypass Lamp with UL924 listed Emergency Battery Backup: T8, 48 Inch, 15 Watt, 2000 Lumens, 5 Watts and 700 Lumens in Emergency Mode, Button and indicator light for battery testing, Dedicated locking sockets and set screws for UL924 compliance, CCT Selectable (3500K/4000K/5000K), Non-Dimmable, G13 Base, 120-277 Volt. Satco S11732, 15WT8/LED/CCT/EM/BP – UL924 listed for use in emergency lighting applications.

Category: T8 Tubular LED Lamps

LED HYBrid T8 Lamp, 15W, 120-277V, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), Lumens: 2200, CRI: 82, Color Temperature: 4000K (Warm White), Rated Life (L70): Up to 50,000 Hrs. NOTE: Suitable for use with 120-277V power or with existing ballasts* Suitable for damp locations and totally enclosed fixtures, Utilizes existing lamp holders – shunted or non-shunted. See .pdf Catalog Page for Wiring Diagrams. * This lamp may not work with all instant start ballasts. For detailed ballast compatibility information please visit www.greencreative.com.

Category: T8 Tubular LED Lamps

4 Ft. LED T8 Lamp, 8.5 Watt, 120-277V, 82 CRI, 1650 Lumens, 5000K, Type-B (Single & Double Ended Bypass)

Category: T8 Tubular LED Lamps

LED Lamp, 10W, 100-277V & 347V, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), Lumens: 1400, CRI: 82, Color Temperature: 2700K, Rated Average Life: 50,000 Hrs. *Philips Part # 468694, 12NC 929001303704. ***Warning: Philips LED T8 InstantFit Lamps Will Only Operate Properly On Compatible Electronic Instant-start Ballasts***

Category: T8 Tubular LED Lamps

LED HYBrid T8 Lamp, 12W, 120-277V, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), Lumens: 1700, CRI: 82, Color Temperature: 3000K (Warm White), Rated Life (L70): Up to 50,000 Hrs. NOTE: Suitable for use with 120-277V power or with existing ballasts* Suitable for damp locations and totally enclosed fixtures, Utilizes existing lamp holders – shunted or non-shunted. See .pdf Catalog Page for Wiring Diagrams. * This lamp may not work with all instant start ballasts. For detailed ballast compatibility information please visit www.greencreative.com.

Category: T8 Tubular LED Lamps

LED Lamp, 14 Watt, 120-277 Volt, Bulb: T8, Length: 48 Inch, Base: Medium Bi-Pin (G13), Lumens: 1700, Beam Angle: 240, CRI: 82, Color Temperature: 3000K, Rated Life: Up to 50,000 Hours, NOTE: Double-Ended Ballast BYPass Installation, Wired at Both Ends, Utilizes Existing Lampholders, Shunted or Non-Shunted (must shunt). P/N 47731-5, MDL# 9290018454, DLC ID: P3V56EPW.

Category: T8 Tubular LED Lamps

LED T8 High Output PET Coated Linear Tube 15W 48in 5000K Type B Double-Single Ended 2200 Lumen

Category: T8 Tubular LED Lamps

LED Lamp, 14.5 Watt, 120-277 Volt, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), Lumens: 2000, Beam Angle: 180, CRI: 80, Color Temperature: 3000K, Rated Life: Up to 50,000 Hours, NOTE: MainsFit (UL Type B) Ballast BYPass Installation. P/N 557389, 12NC 929002325404.

Category: T8 Tubular LED Lamps

Dimmable LED Lamp, 14W, 120-277 & 347V, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), Lumens: 1900(LBF), 2100(NBF), 2800(HBF), CRI: 82, Color Temperature: 4000K, Rated Average Life: 50,000 Hrs. *Philips Part # 469627, 12NC 929001158784 ***Warning: Philips LED T8 InstantFit Lamps Will Only Operate Properly On Compatible Electronic Dimming Ballasts***

Category: T8 Tubular LED Lamps

4' T8 Type A (Double Ended) or Type B (Single/Double ended) 5CCT Selectable PET Coated LED Lamp: 15W, 1800 Lumens, Voltage: 120-277, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), CRI: 80, Color Temperature: 30K/35K/41K/50K/65K. Rated for open or enclosed fixtures and damp locations.

Category: T8 Tubular LED Lamps

LED Lamp, 12W, Voltage: 120-277, 347 VAC (Ballast Dependent), Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), Lumens: 1300 (LBF), 1750 (NBF), 2340 (HPF), CRI: 80, Color Temperature: 3500K, Rated Average Lifr: 50,000 Hrs. Approved for open and enclosed fixtures ***Warning: Works on Compatible Instant Start Electronic Ballasts *** See Catalog page for compatibility chart. NOTE: Use shunted sockets for Instant Start ballasts. Use non-shunted sockets for Rapid, Programmed, and Dimmable ballasts.

Category: T8 Tubular LED Lamps

4 Ft. 13 Watt T8 LED; Medium bi-pin Base; 4000K; 50000 Hours; 1900 Lumens; Type A/B; Ballast Dependant or Ballast Bypass; Single or Double Ended Wiring

Category: T8 Tubular LED Lamps

12W 1800LM T8 4 Ft. Type A+B+Single+Double End Glass 80CRI 5000K 120-277. Length is 48 Inches. (EiKO ordering code - 12502), (DLC Code - PL5F0QSFTYX1)

Category: T8 Tubular LED Lamps

LED Lamp, 16 Watt, 120-277 Volt, Bulb: T8, Length: 48 Inch, Base: Medium Bi-Pin (G13), Lumens: 1750, Beam Angle: 190°, Field Angle: 300°, CRI: 80, Color Temperature: 3000K, Rated Life: L70 50,000+ Hours, NOTE: Double-Ended Ballast BYPass Installation, Wired at Both Ends, Utilizes Existing Lampholders, Shunted or Non-Shunted (see wiring diagram on Catalog page .pdf). UL rated for enclosed fixtures. TCP LED Type AB™ Tube.

Category: T8 Tubular LED Lamps

4 Ft. Type-A (Ballast Compatible) T8 Lamp: 12 Watt, 1800 Lumens (Equivalent to 32 Watt T8), Base: Medium Bi-Pin (G13), CRI: 82, Color Temperature: 4000K, Dimmable (External Driver Required), PET Coated Glass with plastic end caps (UL listed - NSF-2 Food Equipment Rated). Halco Product ID: 87212, Product Code: 48T8-12-840-DSE-BCO5-LED-CG. *** Not DLC Listed ***

Category: T8 Tubular LED Lamps

10.5 Watt T8 LED; 4Ft; 5000K; Medium Bi Pin Base; 50000 Average rated hours; 1700 Lumens; Type B; Ballast Bypass; Single or Double Ended Wiring

Category: T8 Tubular LED Lamps

LED18WT8F/48/840K-G4D

Category: T8 Tubular LED Lamps

Dimmable LED Lamp with Easy Smart Technology, 14W, 120-277 & 347V, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), , Lumens: 1800(LBF), 2000(NBF), 2700(HBF), CRI: 82, Color Temperature: 3500K, Rated Average Life: 50,000 Hrs. *Philips Part # 46646-6 * Mdl. #: 9290012812 * DLC ID # P4T5JGUP * Lamps require an instant-start ballast. They will NOT work on a programmed start ballast. On/off and dimming without rewiring the fixture when used with instant start ballast and Zigbee communicating wall dimmer.

Category: T8 Tubular LED Lamps