"wc-r-c"

17 Found

In Stock Only

List

Grid

NSI Tork

POLARIS Mount Ins Multi-Tap 600 6 Port

6 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7U and Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250244

CAT #: IPLMD600-6

UPC: 662381789181

Category: Single Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 600 10 Port DSE

10 Wire Polaris 600 MCM - 6 AWG Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL7CU. Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250194

CAT #: IPLD600-10

UPC: 662381789570

Category: Single Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 500 4 Port SSE

4 Wire Polaris 500 MCM - 4 AWG Insulated Multi-Cable Connector Polaris Insul-Tap Connectors are suitable for connecting four wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Item #: 0264002

CAT #: IPL500-4

UPC: 662381915023

Category: Single Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 500 8 Port SSE

8 Wire Polaris 500 MCM - 4 AWG Insulated Multi-Cable Connector Polaris Insul-Tap Connectors are suitable for connecting eight wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Item #: 0264023

CAT #: IPL500-8

UPC: 662381915061

Category: Single Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 3/0 5 Port SSE

5 Wire Polaris3/0-6 AWG Insul-Tap Connector Polaris Insul-Tap Connectors are suitable for connecting five wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Item #: 0424003

CAT #: IPL3/0-5

UPC: 662381912039

Category: Single Sided Entry Wire Connector Blocks

Company wide:

NSI IPLG6-3B 6-14 AWG (CLASS B,C,D

NSI IPLG6-3B 6-14 AWG (CLASS

Item #: 0250210

CAT #: IPLG6-3B

UPC: 662381959423

Category: Single Sided Entry Wire Connector Blocks

Company wide:

POLARIS Mount Ins Multi-Tap 1/0 5 Port

5 Wire Polaris 1/0-14 AWG Insulated Multi-Cable Connector with Mounting Holes, One Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on one side only. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLM Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt. UL Listed 486B Wire Connector. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250218

CAT #: IPLM1/0-5

UPC: 662381931030

Category: Single Sided Entry Wire Connector Blocks

Company wide:

POLARIS Mount Ins Multi-Tap 600 10 Port

10 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7CU. Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250240

CAT #: IPLMD600-10

UPC: 662381789228

Category: Single Sided Entry Wire Connector Blocks

Company wide:

NSI ITG-1B "1-10 AWG ( B,C,D)

NSI ITG-1B "1-10 AWG ( B,C,D)

Item #: 0918530

CAT #: ITG-1B

UPC: 662381959461

Category: Single Sided Entry Wire Connector Blocks

Company wide:

NSI IPLG1-3B 1-10 AWG ( B,C,D) 2-10

NSI IPLG1-3B

Item #: 0828477

CAT #: IPLG1-3B

UPC: 662381959492

Category: Single Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 250 4 Port SSE

4 Wire Polaris 250 MCM - 6 AWG Insulated Multi-Cable Connector Blocks Polaris Insul-Tap Connectors are suitable for connecting four wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Item #: 0263990

CAT #: IPL250-4

UPC: 662381913029

Category: Single Sided Entry Wire Connector Blocks

Company wide:

NSI IPLG3/0-4 3/0-4 AWG ( B,C,D) 2/

NSI IPLG3/0-4 3/0-6 MULTI TAP

Item #: 0622695

CAT #: IPLG3/0-4

UPC: 662381951564

Category: Single Sided Entry Wire Connector Blocks

Company wide:

NSI IPLG3/0-3B 3/0-4 AWG ( B,C,D) 2

NSI IPLG3/0-3B 3/0-4 AWG ( BC

Item #: 0250209

CAT #: IPLG3/0-3B

UPC: 662381959553

Category: Single Sided Entry Wire Connector Blocks

Company wide:

NSI IPLG6-4B 6-14 AWG (CLASS B,C,D

NSI IPLG6-4B 6-14 AWG (CLASS

Item #: 0250211

CAT #: IPLG6-4B

UPC: 662381959430

Category: Single Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 4 4A Port SSE

4 Wire Polaris4-14 AWG Insulated Multi-Cable Connector Blocks with Allen Head screw Polaris Insul-Tap Connectors are suitable for connecting four wires. Wire entry ports on one side only. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Item #: 0250160

CAT #: IPL4-4A

UPC: 662381910226

Category: Single Sided Entry Wire Connector Blocks

Company wide:

POLARIS Grey Multi-Tap 6 2 Port OS

2Wire Polaris Grey Insulated Connector for6-14 AWG Fine-Stranded Flexible Copper Conductors, Dual Sided Entry Polaris GreyInsul-Tap Connectors are suitable for connectingtwo wires, designed for use with fine-stranded flexible copper conductors.Excellent for use in motor connect/disconnect applications. Abrasion and chemical resistant. Will not support combustion. Cold temperature rated to -45 degrees Celsius, rated 600 volts.

Item #: 0620203

CAT #: ITOG-6

UPC: 662381951410

Category: Single Sided Entry Wire Connector Blocks

Company wide:

Discontinued

POLARIS Ins Multi-Tap 4 3A Port SSE

3 Wire Polaris4-14 AWG Insulated Multi-Cable Connector Blocks with Allen Head screw Polaris Insul-Tap Connectors are suitable for connecting three wires. Wire entry ports on one side only. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Item #: 0250157

CAT #: IPL4-3A

UPC: 662381910219

Category: Single Sided Entry Wire Connector Blocks

Company wide:

Discontinued

POLARIS Mount Ins Multi-Tap 600 6 Port

6 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7U and Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250244

CAT #: IPLMD600-6

UPC: 662381789181

Category: Single Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 600 10 Port DSE

10 Wire Polaris 600 MCM - 6 AWG Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL7CU. Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250194

CAT #: IPLD600-10

UPC: 662381789570

Category: Single Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 500 4 Port SSE

4 Wire Polaris 500 MCM - 4 AWG Insulated Multi-Cable Connector Polaris Insul-Tap Connectors are suitable for connecting four wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Item #: 0264002

CAT #: IPL500-4

UPC: 662381915023

Category: Single Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 500 8 Port SSE

8 Wire Polaris 500 MCM - 4 AWG Insulated Multi-Cable Connector Polaris Insul-Tap Connectors are suitable for connecting eight wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Item #: 0264023

CAT #: IPL500-8

UPC: 662381915061

Category: Single Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 3/0 5 Port SSE

5 Wire Polaris3/0-6 AWG Insul-Tap Connector Polaris Insul-Tap Connectors are suitable for connecting five wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Item #: 0424003

CAT #: IPL3/0-5

UPC: 662381912039

Category: Single Sided Entry Wire Connector Blocks

Company wide:

NSI IPLG6-3B 6-14 AWG (CLASS B,C,D

NSI IPLG6-3B 6-14 AWG (CLASS

Item #: 0250210

CAT #: IPLG6-3B

UPC: 662381959423

Category: Single Sided Entry Wire Connector Blocks

Company wide:

POLARIS Mount Ins Multi-Tap 1/0 5 Port

5 Wire Polaris 1/0-14 AWG Insulated Multi-Cable Connector with Mounting Holes, One Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on one side only. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLM Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt. UL Listed 486B Wire Connector. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250218

CAT #: IPLM1/0-5

UPC: 662381931030

Category: Single Sided Entry Wire Connector Blocks

Company wide:

POLARIS Mount Ins Multi-Tap 600 10 Port

10 Wire Polaris 600 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL7CU. Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Item #: 0250240

CAT #: IPLMD600-10

UPC: 662381789228

Category: Single Sided Entry Wire Connector Blocks

Company wide:

NSI ITG-1B "1-10 AWG ( B,C,D)

NSI ITG-1B "1-10 AWG ( B,C,D)

Item #: 0918530

CAT #: ITG-1B

UPC: 662381959461

Category: Single Sided Entry Wire Connector Blocks

Company wide:

NSI IPLG1-3B 1-10 AWG ( B,C,D) 2-10

NSI IPLG1-3B

Item #: 0828477

CAT #: IPLG1-3B

UPC: 662381959492

Category: Single Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 250 4 Port SSE

4 Wire Polaris 250 MCM - 6 AWG Insulated Multi-Cable Connector Blocks Polaris Insul-Tap Connectors are suitable for connecting four wires. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Item #: 0263990

CAT #: IPL250-4

UPC: 662381913029

Category: Single Sided Entry Wire Connector Blocks

Company wide:

NSI IPLG3/0-4 3/0-4 AWG ( B,C,D) 2/

NSI IPLG3/0-4 3/0-6 MULTI TAP

Item #: 0622695

CAT #: IPLG3/0-4

UPC: 662381951564

Category: Single Sided Entry Wire Connector Blocks

Company wide:

NSI IPLG3/0-3B 3/0-4 AWG ( B,C,D) 2

NSI IPLG3/0-3B 3/0-4 AWG ( BC

Item #: 0250209

CAT #: IPLG3/0-3B

UPC: 662381959553

Category: Single Sided Entry Wire Connector Blocks

Company wide:

NSI IPLG6-4B 6-14 AWG (CLASS B,C,D

NSI IPLG6-4B 6-14 AWG (CLASS

Item #: 0250211

CAT #: IPLG6-4B

UPC: 662381959430

Category: Single Sided Entry Wire Connector Blocks

Company wide:

POLARIS Ins Multi-Tap 4 4A Port SSE

4 Wire Polaris4-14 AWG Insulated Multi-Cable Connector Blocks with Allen Head screw Polaris Insul-Tap Connectors are suitable for connecting four wires. Wire entry ports on one side only. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Item #: 0250160

CAT #: IPL4-4A

UPC: 662381910226

Category: Single Sided Entry Wire Connector Blocks

Company wide:

POLARIS Grey Multi-Tap 6 2 Port OS

2Wire Polaris Grey Insulated Connector for6-14 AWG Fine-Stranded Flexible Copper Conductors, Dual Sided Entry Polaris GreyInsul-Tap Connectors are suitable for connectingtwo wires, designed for use with fine-stranded flexible copper conductors.Excellent for use in motor connect/disconnect applications. Abrasion and chemical resistant. Will not support combustion. Cold temperature rated to -45 degrees Celsius, rated 600 volts.

Item #: 0620203

CAT #: ITOG-6

UPC: 662381951410

Category: Single Sided Entry Wire Connector Blocks

Company wide:

Discontinued

POLARIS Ins Multi-Tap 4 3A Port SSE

3 Wire Polaris4-14 AWG Insulated Multi-Cable Connector Blocks with Allen Head screw Polaris Insul-Tap Connectors are suitable for connecting three wires. Wire entry ports on one side only. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45 degrees Celsius. Dual rated for use with copper and/or aluminum cables. 600 volts. Not recommended for fine-stranded, flexible wire (see Polaris Grey Series).

Item #: 0250157

CAT #: IPL4-3A

UPC: 662381910219

Category: Single Sided Entry Wire Connector Blocks

Company wide:

Discontinued

17 Items found