"ab-12124gsb the austin co."

Liquidtight Connector, 2 Inch, Straight, Insulated Throat, External Grounding Lug, Zinc Electroplated Steel, For Use With Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

PVC coated device boxes and covers, available in several configurations, may be used in coated conduit systems to accommodate wiring devices, to serve as pull boxes for conductors, or to allow for splices and taps in conductors. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated FD Device Boxes

STB Series 90 DEG Liquidtight Connector With Wire Mesh Strain Relief, Size: 1 IN, Material: Malleable Iron, Finish: Chromate, Epoxy Powder Coat/Zinc Electroplated, Insulation: Insulated Throat, Thread Length: 3/4 IN, Outside Diameter:

Category: Liquidtight Strain-Relief Grips with Mesh

Liquidtight Connector, 2 inch, Straight, Female ST Connection, Material: Zinc Electroplated Steel

Category: Malleable Iron Liquidtight Flex Connectors

Liquidtight Connector, Insulated, Straight, Size: 1-1/2 Inch, Steel, For Use With Liquidtight Flexible Metal Conduit in Sheet Metal Enclosure Installations.

Category: Malleable Iron Liquidtight Flex Connectors

Liquidtight Connector, 2 Inch, Straight, With Grounding Lug, Steel, For Use With Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

Fits both 16" and 24" on-center ceiling constructions,1 Hour Fire Rated, 2" wide nailing flange on all sides,To be used with Mica tape (FIRETAPE sold separately) to seal the power feeding point

Category: Fire Rated Recessed Lighting Enclosures

15 Amp, 120 Volt, 3 ft. Cord Set, Molded-On NEMA Plug (5-15P) and Triple-Tap Connector (5-15R), Straight Blade, Automatic Reset GFCI Device, 14-3 SJTW Cord, RoHS Compliant

Category: In-Line GFCI Devices With Molded Plug & Triple Tap Connector

Step Bit, Kwik Stepper, Length: 3-9/16", Diameters: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16" & 7/8", Appropriate Use: Mild Steel, Copper, Brass, Aluminum, Wood, Plastic & Laminates, Maximum Cutting Depth: 10 Gauge.

Category: Step Bits

The 24-Hour, Electromechanical In-Wall Timer, 20A, 120V, White, 2 Gang Receptacle The KM2 Series Electromechanical In-Wall Timers replace standard wall switches (toggles) and provide automatic control of outdoor or indoor lighting, fans, pumps, office machines and other types of circuits. Captive trippers are easy to set and cannot be lost. Seventy-two trippers provide up to 36 ON/OFF events in a 24/hour period. Three-way OFF/AUTO/ON override switch provides continuous ON or OFF positions. The timers feature easy wiring and installations.

Category: In-Wall Mechanical Time Switches

QBox® Junction Box, Flashed Junction Box, 12" x 12" Anodized Aluminum Flashing With Patented Elevated Water Seal Technology®, 5.5" x 5.75" Polycarbonate Enclosure, Waterproof Pass-Through For Conduit From QBox Enclosure To The Attic, Includes Fasteners To Install To The Roof Deck, Fittings For Through-The-Deck Conduit Attachment And Wire Connectors To Transition Or Combine Up To Two (2) Strings Of Conductors, Bronze Finish

Category: Solar Flashing

The Halo Surface LED Downlight (SLD) incorporates WaveStream™ technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. SLD4 (4") is designed for installation in many standard and fire-rated 3-1/2" and 4” round or octagon junction boxes. Supply wire adapater with LED quick wiring connector included. Suitable for residential or commercial installations. Ideal for closets, storage areas, attics and basements. The SLD4 may also retrofit in 4” aperture IC and Non-IC recessed housings. Dedicated LED wiring connector meets high efficacy code requirement when used in recessed downlighting. Compliant with NFPA® 70, NEC® Section 410.16 (A) (3) and 410.16 (C)(5).

Category: Residential Surface / Flush Mount LED Lighting

Bradybondz™ Labels For The Tls 2200& Tls-pc Link™ Thermal Transfer Portable Printers. Please Note: This Material Is Ul, Csa & Aga Approved With Itsrespective Ribbon. See The Recommended Ribbon Series For The Appropriate Ribbonto Use.

Category: Permanent Labels

1000 VA, 1-Phase, 240 X 480V, 230 X 460V, 220 X 440V Primary Volts With Jumpers - 120/115/110V Secondary Volts, MTE Industrial Control Transformer, 55 Degree C, Copper Magnet Wire, 50/60 Hz Operation. Includes: Fuse Clips on the Secondary Side for 13/32 x 1-1/2" Fuses.

Category: 1 - 1.6 KVA Industrial Control Transformers

20V MAX 5IN. Orbital Sander, Dust Port is Designed to Fit Directly to the DWV010 or DWV012 Dust Collectors (Sold Separately), Variable Speed Control From 8,000 – 12,000 OPM

Category: Cordless Grinders

The interchangeable product line, INSULGRIP pin and sleeve features metallic where you want it and non-metallic where you need it offers two different styles of grounding.

Category: 60 Amp Pin & Sleeve Receptacles

Wall mounting bracket, material: Sheet steel, zinc-plated, supply includes: Assembly parts for mounting on the enclosure. Packaging Unit: 4 pc(s).

Category: Enclosure Mounting Bracket Kits

Sonoma Style Wall Fan Heater, WHITE 1000W 120V, Built-in thermostat compatible with the Maestro ecosystem, White grill

Category: All Area Fan Forced Heaters

Cleats Easily Clip Onto The Bottom Of Clamp-on Breaker Lockout Devices. Assurespositive Restraint For Breakers With Long, Sliding Switch Throws.

Category: Circuit Breaker Lockout Systems

Fluorescent Lampholder, Slimline Base, Pedestal, Single Pin, Slide-On, Plunger, White

Category: High Output / Slimline Fluorescent Lampholders

Down Light Alum 5W 3000K 40° MR16 12/24V AC/DC Dim LED

Category: LED Landscape - Flood/Spot Lights

GRE 930XC-30F-UPC-FC OTDR SM

Gre K28gl Wire Ferrule Crimp tool 7-1/0 Awg.

Category: Wire Crimping Tools