"ab-121224sw the austin co."

Contact Block Portion for the C400 Series.

Category: Starter & Contactors - Enclosure - Controls

The vibration resistant male tab disconnect is made of brass and is nickel-plated. It is fully insulated in a blue, nylon housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.91" (23.1

Category: Male Nylon Insulated Wire Disconnects

The cable tie tool in red installs standard, heavy-standard, light-heavy, and heavy cross-section cable ties. It is an inexpensive, maintenance-free, all-purpose tool with an ergonomic handle design and short handle span. It also features a top-loading fe

Category: Cable Tie Tools

Braided Expandable Sleeving, 0.13" diameter (3.2mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, black, Polyethylene Terephthalate, 1000 ft. per reel.

Category: Braided Expandable Sleeving

The 4-way adhesive backed cable tie mount in white is mounted with acrylic adhesive tape. It is 0.50" long x 0.50" wide (12.7 x 12.7 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with m

Category: Cable Tie Bases

The masonry push barb cable tie mount in black, made of impact modified, weather-resistant nylon 6.6 uses a fir tree hole mounting method. It requires a hole diameter of 0.31" (7.9 mm) and is designed for use in indoor and outdoor environments. It is used

Category: Cable Tie Bases

The 57 Series strobes are heavy-duty, double flash strobe lights designed for use in general signaling applications. 2.3 Million peak candela.

Category: Non-LED Beacon - Strobe

Eaton main fusible switch, 600A, Aluminum, NEMA 3R, Overhead, Class T, 100 kAIC, Four-wire, Three-phase, Barrier kits: 400A-800A fusible switches: Bottom feed-3MFSBBK, Top feed-3MFSTB, 120/208V, (2) #4 AWG-600 kcmil, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Main Terminal Boxes

The extra heavy cable tie mount in green is applied with a #10 (M5) screw. It is made of polypropylene for indoor environments. It comes in packages of 100.

Category: Cable Tie Bases

Protects against Knife Injuries on the Job, Cleanly Strips Al THHN/XHHW Cable, Jacket Ejection Slot Enables Easy Material Removal, Prevents Jams

Category: Power Cable Strippers

CUT UTRS213BE MTR SKT, 200A, RINGLESS, OH/UG,GRND CONN. UL, HUB OPENING, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

ProTek Rack Angles support 19in rack equipment in the single and double-hinged ProTek product. This ProTek Rack Angles Square, PTRA36S item measures 33.25 19U with a material of Steel finish Plated.

Category: NEMA 4 Wall Mount Enclosures

C-H MB48B200BTSG 1 IN TYPE BR, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - without Distribution

Eaton resi meter breaker, All-in-ones, 150A, C, Aluminum, NEMA 3R, Bottom and top, #6-350 kcm22 kAIC, #6-350 kcmCSR2150, Surface mounting, 8, Four-jaw, 1, 4, Single-phase, Ringless, Used with BR breakers, 120/240 Vac, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

2-1/2" Mast Set Screw Model Allows The Installer To Cut Their Rigid Conduit To Any Length

Category: Mast Guying Kits without Wire

4" Mast Set Screw Model Allows The Installer To Cut Their Rigid Conduit To Any Length

Category: Mast Guying Kits without Wire

Clevis Hanger, 1/2 Inch Pipe, 3/8 Inch Rod, Steel/Electro-Galvanized, Recommended For the Suspension of Stationary Pipe

Category: Strut Channel Clevis Hangers

Loop Hanger, Standard Duty, 1/2 Inch, Rod Size 3/8 Inch, Steel/Pre-Galvanized, Recommended For The Suspension of Stationary Pipe

Category: Strut Channel Clevis Hangers

25 Amp, 1-Pole, Compact Definite Purpose Contactor, 600V Rated, Binding Head Screw Terminals, 277V AC Coil. ***No Replacement Coils Available for the Compact Series***

Category: 1-Pole Definite Purpose Contactors

Mounting Box Only, Vertical, Deep, Paintable Features: Flange, Includes NM Cable Connector, Application: GFCI, Vertical Mounting Fixture, Material: UV Rated Plastic, Size: 6.50 x 1.62 x 6.50 Inch, Cubic Inches: 24.5, White, Non-Metallic

Category: Non-Metallic Through The Wall Switch / Outlet Boxes

C-H CMBXB200BTS SINGLE METER SOCKET W/200A MAIN, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

nVent ERICO copper bonded rods combine the strength of steel for ease of installation with molecularly bonded copper for long lasting corrosion resistance. Pointed, 3/8" x 5' ground rod with 10 mil plating thickness.

Category: Copper Ground Rods

Front/Rear Plinths, PF allow cabling without any restrictions and creates extra space under the enclosure. This Front/Rear Plinths, PF, PF1060 item measures 100x598x63mm with a material of Zinc Plated, Mild Steel, color Umbra Gray.

Category: Enclosure Housing Bases

Front/Rear Plinths, PF allow cabling without any restrictions and creates extra space under the enclosure. This Front/Rear Plinths, PF, PF1100 item measures 100x998x63mm with a material of Zinc Plated, Mild Steel, color Umbra Gray.

Category: Enclosure Housing Bases