"gm92406-kp3-qs kohler power systems"

200 Amp, 8250V, Medium Voltage Fuses - R-Rated Series

Category: R-Rated Motor Circuit Protection Fuses

Inside corner fitting for use with LDPH10 and LD2P10 raceway, International Gray, ABS, Length 2.49 in.

Category: 1-Piece Non-Metallic Raceway Elbows

LUT FCJS-010-BULK8 FIXTURE CO

Category: Occupancy Sensor Power Packs

GE Type QL transformers meet NEMA TP-1 efficiency standards. They are available with aluminum or copper windings and utilize a UL recognized 220 C insulation system. Quiet Performance-Core and coil assemblies are mounted on rubber isolation pads to reduce noise-Bolted coil terminations-Single-piece front/back is easily removable for service-NEMA 2 drip-proof enclosure is standard, weathershield kits are available for conversion to NEMA 3R outdoor configuration-Qualified to the seismic requirements of IEEE-693-2005 and IBC-2006-Copper or a luminu m windings-C opper gr ound strap- Robust packaging with top and side protection protects against shipping damage-Accessible mounting flanges with front/back slotted mounting holes make installation easier-100PERC factory tested for shorts and coil integrity, current and loss, voltage, impedance and noise. Clear, comprehensive documentation and labeling 85B3873

Category: 40 - 45 KVA Dry Type Transformers

GE Type QL transformers meet NEMA TP-1 efficiency standards. They are available with aluminum or copper windings and utilize a UL recognized 220 C insulation system. Quiet Performance-Core and coil assemblies are mounted on rubber isolation pads to reduce noise-Bolted coil terminations-Single-piece front/back is easily removable for service-NEMA 2 drip-proof enclosure is standard, weathershield kits are available for conversion to NEMA 3R outdoor configuration-Qualified to the seismic requirements of IEEE-693-2005 and IBC-2006-Copper or a luminu m windings-C opper gr ound strap- Robust packaging with top and side protection protects against shipping damage-Accessible mounting flanges with front/back slotted mounting holes make installation easier-100PERC factory tested for shorts and coil integrity, current and loss, voltage, impedance and noise. Clear, comprehensive documentation and labeling 3872G15

Category: 30 KVA Dry Type Transformers

Breaker, Molded Case, Operating Mechanism, Variable Depth, 30, 60, 100 Amp

Category: Molded Case Circuit Breaker Operating Mechanisms

Tamper resistant two-piece latching surface raceway. Supplied with pre-punched mounting holes and factory applied adhesive tape. Available in 6', 8', and 10' lengths, White, PVC, Length 10.00 ft, Width 0.77 in.

Category: 2-Piece Non-Metallic Raceway

Tamper resistant two-piece latching surface raceway. Supplied with pre-punched mounting holes and factory applied adhesive tape. Available in 6', 8', and 10' lengths, White, PVC, Length 8.00 ft, Width 1.52 in.

Category: 2-Piece Non-Metallic Raceway

Miniature Circuit Breaker Lockout Device, Nylon, Red, 0.4 Inch Length, 1.75 Inch Width

Category: Circuit Breaker Lockout Systems

Right angle fitting for use with LDPH10 and LD2P10 raceway, International Gray, ABS, Length 3.18 in.

Category: 1-Piece Non-Metallic Raceway Elbows

T-45 raceway base with adhesive and pre-punched mounting holes, 8 foot length.

Category: 1-Piece Non-Metallic Raceway

200 Amp, 8250V, Medium Voltage Fuses - R-Rated Series

Category: R-Rated Motor Circuit Protection Fuses

Eaton dimmer, No neutral required, #14 -12 AWG, Flush, 120/277 Vac, Back and side, Wire Leads, Maintained, Gray, 60 Hz, LED, Flourescent, Single-pole, Three-way, Single-phase, Polycarbonate, 1200/1660W 736896

Category: Dimmer Power Packs

Eaton dimmer, No neutral required, #14 -12 AWG, Flush, 120/277 Vac, Back and side, Wire Leads, Maintained, Light almond, 60 Hz, LED, Flourescent, Single-pole, Three-way, Single-phase, Polycarbonate, 1200/1660W 736902

Category: Dimmer Power Packs

C-H 699B196G01 MULTIPLE

Category: Molded Case Circuit Breaker Operating Mechanisms

Eaton, Molded case circuit breaker accessory, Handle mechanism, Series C: Handle Mechanisms, Through-the-Door Handle Mechanism, Rotary Handle, 6 in. Shaft, NEMA 4/4X, Used with F-Frame

Category: Molded Case Circuit Breaker Operating Mechanisms

30 AMP, 3-Pole, DC Ungrounded System Disconnect Switch, Non-Fusible, 600 VDC, NEMA 3R. For use in DC Photovoltaic Applications. Enclosure Dims: H: 19.08", W: 12.88", D: 5.50".

Category: 600 Volt DC Rated Non-Fusible Disconnect Switches

Series C Rotary Handle Mechanism, 16 Inches (406.4 Mm) Shaft Length, NEMA Type 4/4x, For F-frame Breaker

Category: Molded Case Circuit Breaker Operating Mechanisms

B-LINE SB13411/2YZ

Category: Cable Tray Mounting Hardware

Electrical Operator, Solenoid Type, Terminal Block, For F-frame Breaker, 120 Vac

Category: Molded Case Circuit Breaker Operating Mechanisms

C-h Hm3r06 Rotary Handle Mech

Category: Molded Case Circuit Breaker Operating Mechanisms

CUTLER HAMMER 699B196G04

Category: Molded Case Circuit Breaker Operating Mechanisms

For AC8840 and AC8104 Boxes. Includes two (2) Ortronics Series II adapters and two (2) TracJack adapters. NOTE: AC8840 is a single-service box. Power plates cannot be used in conjunction with communication plates.

Category: Communication Module End Plates For Metallic Raceway

200 Amp, 5500V, Medium Voltage Fuses - E-rated Series

Category: E-Rated Fuses