"v5747-3 co"

WMD MDSF10-MG

Category: Assembled Recessed Countertop Boxes

Wiremold audio/video interface plates (AVIP) allow for A/V connectivity in all Wiremold A/V compatible pathways. AVIP Series Device Plates are metal and have screwed-down connectors, which ensure a secure connection that cannot be easily pulled-out or disconnected while in use. Available in data, audio, and video versions, AVIP Series Device Plates help you stay connected in meeting and training rooms, collaboration spaces, or work areas.Microphone connections are now available with Switchcraft

Category: Poke-Through Mounting Plates

Includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL), and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Poke-Through Cover Assemblies

Floor Box Assembly, Round, Type: (4) UTP Connectors, Diameter: 4 Inch, (3) 1/2 Inch Knockouts, Material/Finish: Aluminum/Aluminum, Includes: (2) Wiremold Open System Adapters, (2) Ortronics TracJack Adapters, and (2) Ortronics Series II Adpaters, For Use in Raised Floor or Wood Floor Applications.

Category: Assembled Recessed Round Boxes

Prewired 15A quad receptacle can be wired as standard quad receptacle or isolated ground. Flange available painted in gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). RC9 Series Poke-Thru Devices require a 3 1/16 (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC9 Assembled Unit-Brass Flange and Black Slide Holder, 15A Quad Receptacle Standard or IG Finish - Brass

Category: Assembled Poke-Through Units

This box has a 4" (102mm) depth design with an extra 2" (51mm) of width for additional wiring capacity. These boxes can accommodate two duplex power receptacles on one side. Power plate with duplex knockouts included with box. The communication plate will accept two communication adapters for up to 12 ports of activation. Lids can be rotated 180¦ for easy orientation. Gray lids are die-cast zinc construction. NOTE: For custom options, consult factory. All boxes are sold with one power plate: 4" (102mm) deep boxes have plate with two power duplex receptacle KOs, 5" (127mm) deep boxes have plate with four power duplex receptacle KOs. All communication plates sold separately.

Category: Assembled Recessed Gang Boxes

Non-Metallic, Pancake Overfloor Raceway. 1400 Series. Size: 50' Length, 3" Width, 20/32" Height. Color: Gray.

Category: Non-Metallic Overfloor Raceway

Perma Power computer grade surge protection. Six outlets, lighted switch, durable putty white aluminum housing, 20A. 15' (4.6m) 12/3 SJT putty white cord with NEMA5-15 plug. Length 18" (457mm). Snap-on, slide-off mounting.

Category: Commercial Grade Power Strips

W-mold Wsc42-6 6 Gand Box W/d ividers

Category: Work Surface Power Centers

5' Nonmetallic Pancake Overfloor Raceway. Accepts up to 3/4" cable diameter. Gray

Category: Non-Metallic Overfloor Raceway

Sentrex high performance surge protection. Five outlets, lighted switch, durable putty white aluminum housing, 15A. Receptacles rotated 90 degrees and spaced to accommodate transformers. Length 24" (610mm). 6' (1.8m) 14/3 SJT putty white cord with NEMA5-15 plug. Snap-on, slide-off mounting.

Category: Commercial Grade Power Strips

Accepts single device 1.39" (35mm). NOTE: Standard size for device plates for Plate Location 1 is 6 11/32" (161mm) x 2 3/4" (62mm).

Category: Recessed Compartment Box Device Plates

Complete with combination 1 1/4" and 2" trade size threaded conduit openings and closure plugs. Must be used with a conduit connector (not included) at the adapter assembly plate to maintain fire classification. Finish flange/cover assembly available in gray (GY), black (BK), and brushed aluminum (AL). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AM2TC Series Poke-Thru Devices require a 3" [76mm] diameter hole. Not designed to work with bare concrete or terrazzo.

Category: Poke-Through Cover Assemblies

Floor Box, Raised 2-1/2", Size: 9-1/8 x 11 inch, Accomodates (2) Duplex Receptacles and (6) Communication Devices, Knockouts: (4) 1/2 Inch Concentric, (3) 1/2 Concentric, Polycarbonate Lid, Black

Category: Assembled Recessed Gang Boxes

WMD XCSLF3GRUU-BZ OUTDR CS LI

Category: RV Power Pedestals

Makes right angle turns in 2900 Series Raceway on same surface.

Category: 1-Piece Non-Metallic Raceway Elbows

Accepts up to three (3) Ortronics Series II devices. Ortronics devices sold separately. Device plate dimensions: 2.3" x 4.652" (58mm x 118mm).

Category: Recessed Compartment Box Device Plates

Nine outlets. 6' [1.8m] cord. Length 36" [914mm]. Receptacle center-to-center 3" [76mm]. cULus.

Category: General Duty Power Strips

Furniture feed insert with one 1 1/4" and one 1/2" trade size conduit to feed power and communication services. Use with RC9CFFTC Series Covers to form a complete poke-thru assembly. NOTE: RC9AFFTC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Assembled Poke-Through Units

Steel, Blank End Fitting, 2400 Series. Size: 1-3/16". Black.

Category: Small 2-Piece Metallic Raceway End Fittings

For furniture feed applications. Includes two 1/2"" and one 3/4"" trade size conduit connectors. CAUTION: Not for use on concrete pours less than 4 1/2"" (114mm) deep.Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service. Finish - Brass

Category: Assembled Poke-Through Units

5' Nonmetallic Pancake Overfloor Raceway. Accepts up to 3/4" cable diameter. Black

Category: Non-Metallic Overfloor Raceway

Twelve outlets, rugged gray aluminum housing, 15A, lighted switch, 15' (4.6m) 14/3 SJT black cord with NEMA5-15 plug. Length 72" (1.8m). Receptacle center-to-center 5 1/4" (133mm). Snap-on, slide-off mounting.

Category: Work Surface Power Centers

Adapter Mounting Bezel, Accepts 3 Series II 1-Unit Inserts, Ivory

Category: Snap-In Wallplate Inserts