"ab-100hs the austin co."

2-Gang Toggle Device Switch Wallplate, Standard Size, Material: Thermoplastic Nylon, Device Mount - Color: White.

Category: 2-Gang Toggle Switch Wallplates

Pico Paddle Remote for Caseta White Smart Remote Control, Controls Caséta Smart Switches And Dimmers From Lutron, Add An Additional Point Of Control Wirelessly, Without Needing A Hub Or Password, For Maximum Convenience, Seamlessly Match The Look And Feel Of The Diva Smart Dimmer And Claro Smart Switch With A Consistent Aesthetic, Exclusively With The Diva Smart Dimmer: Tap Once For Preset Slider Level, Double Tap For Full Brightness (May Require Firmware Update For Feature; Hub Required For Update), Place On The Wall With A Wallmount Bracket (Pico-Wbx-Adapt, Sold Separately), Place On A Pedestal (L-Ped1-Wh, Sold Separately), Or Use From Your Hand, Mount On Almost Any Wall Surface With A Wallmount Bracket To Add A 2Nd “Switch” Anywhere You Need It – No Cutting Holes Or Pulling Wire Required (Easy Wireless 3-Way,), Worry-Free: Pico Remotes Typically Have A 10-Year Battery Life, Pico Remotes Can Be Paired With Multiple Caséta Dimmers Or Switches Enabling Them To Control The Lighting Of An Entire Room, Includes (1) Pico Paddle Remote For Caséta Smart Switches And Dimmers; Additional Accessories Sold Separately

Category: Wireless Dimmers & Switches

20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Narrow Body Single Receptacle, Straight Blade, Tamper Resistant, Commercial Grade, Grounding, Back & Side Wired, Steel Strap - White

Category: Tamper Resistant Commercial Grade Receptacles

Wallplate, QuickPort, 1-Gang, 1-Port, Box Mount, Color: White.

Category: Snap-In Wallplates

The CP-C.1 24/10.0 is a power supply from the CP-C.1 range. The primary switch mode power supply offers a wide range input of 85-264 V AC and 90-300 V DC, rated input voltage is 110-240 V AC. The rated output power is 240 W, rated output current is 10 A at an output voltage of 24 V DC. The output voltage is adjustable within a range of 22.5 to 28.5 V DC. The power supply provides a U/I output characteristic with a power reserve of up to 50 percent and allows parallel operation to increase capacity and to enable redundancy. Further features are: power factor correction acc. to EN 61000-3-2. Redundancy unit and buffer modules are available as accessories.

Category: DIN Mount Uninterruptable Power Supplies

The Winterized Insert will help decrease cold air leakage from the attic into the home when the QuietCool fan is not in use. The Winterized Insert is made up of a Vacuum Insulated Panel which contains an R value of 40. Combined with the QuietCool Pro Series fans, there will be an R45 barrier between the attic and living space in the off-season. 14 x 36 in.

Category: Fan Winter Inserts

Pocket Flashlight With 3 Fl1-Rated Brightness Modes, High: 400 Lumens With Runtime Up To 3 Hours; Medium: 200 Lumens With Runtime Up To 5 Hours; Low: 100 Lumens With Runtime Up To 8 Hours, Turbo Mode Provides A Powerful Beam Up To 1000-Lumens In Intervals Of 60 Seconds For Quick Inspections, Class 2 Green Laser Pointer Clearly Pinpoints Out-Of-Reach Objects, On-The-Go Floodlight Embedded In The Underside Of The Mini Flashlight Provides Wide Area Coverage, Strong Magnetic End Cap Allows The Light To Be Mounted For Hands-Free Operation, Dual-Directional Clip Attaches To Hats And Clothes Securely, Rechargeable Via Usb-C With Battery Level Indication

Category: Pocket / Key Chain Flashlights

The RayClic-LE Lighted End Seal Kit is for use with Raychem IceStop, XL-Trace and HWAT heating cables. The connection is designed to be installed above the pipe insulation or mounted on the wall at the end of the heating cable circuit ***Temporary Raw Material Shortage Will Not Be back in Stock Until Nov 2024***

Category: Heat Cable Splice Kits

Snap-In Connector, QuickPort, GigaMax 5e, CAT 5e, 8P8C, Channel-Rated, Color: White.

Category: Snap-In Cat 5e Jack Inserts

Hex Driver Sizes Include: 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 1/2-Inch, And 9/16-Inch, Impact-Rated Sockets For The Toughest Driving Applications, Flip Sockets Enable Quick Access And Convenience To Common Sizes, Color Coded Hex Sizes For Easy Identification, Store Sockets In Any Order And Orientation On The Shaft, Bit Holding Design Allows The 1/4-Inch Socket Size To Drive Hex Fasteners And Hold Screwdriver Bits, Flip Socket Set Can Quickly Attach To An Impact Driver Or Our 1/4-Inch Quick-Connect Driver Handles For Any Situation, Handle Not Included

Category: Sockets & Socket Sets

2-Gang, 1-Toggle 1-Decora/GFCI Device Combination Wallplate, Standard Size, Thermoplastic Nylon, Device Mount - White.

Category: Toggle Switch / Decorator-GFCI Combination Wallplates

2-Gang, No Device Blank Wallplate, Standard Size, 430 Stainless Steel, Box Mount - Stainless Steel

Category: 2-Gang Blank Wallplates

Afci /Gfci Outlet Tester Rt310 Detects The Most Common Wiring Faults In Standard, Afci, And Gfci Electrical Outlets Test Afci Devices By Simulating Arc Fault Conditions Test Gfci Devices By Simulating Ground Fault Conditions Capable Of Detecting A Dual-Open Wiring Fault With Simultaneous Open Neutral And Open Ground Wires (Patent Pending Technology) Tester Delivers Clear Visual Indication Of The Wiring Condition At The Electrical Outlet Designed To Test North American-Style Grounded Electrical Outlets In 120V Ac Circuits (Incorporates A Three-Pin Plug) Electrical Plug Is On A 10-Inch (254 Mm) Flexible Electrical Cord To Access Electrical Outlets In Difficult To Reach Locations Low Battery Indicator And Easily Accessible Battery Compartment; Uses 3 X 1.5V Aaa Alkaline Batteries (Included) Powers Off Automatically After Approximately 2 Minutes Of Non-Use To Conserve Battery Life Built To Withstand A 6.6-Foot (2 M) Drop Catiii 135V Safety Rating Measurement Category Iii Is Applicable To Test And Measuring Circuits Connected To The Distribution Part Of The Building’S Low-Voltage Mains Installation The Rt310 Features A Patent Pending Afci Test Method That Is Unique To Klein Tools

Category: Receptacle Testers

The Modbox™ Utility Cart Has A 39-Inch Overall Height Which Makes It Taller Than Most Carts And More Comfortable When Using The Top Shelf As A Work Surface, 6-Inch Rubber Caster Wheels To Effortlessly Move Almost Anything Anywhere, Cart Handle Includes Two Cup Holders And Multiple Compartments For Small Tools, Hardware, Pens, Cell Phones, Utility Knives, And More, Rails Around The Top Shelf Allow For The Attachment Of Modbox™ Accessories And Tool Pouches, Notches On The Top Shelf Can Be Used To Steady Conduit And 2-Inch By 4-Inch Boards For Measuring Or Cutting, Cart Leg Holes Accommodate 1/2-Inch Conduit To Hold Spools Of Wire And Other Items, 500-Pound Capacity

Category: Utility Carts

15 Amp, 125 Volt, NEMA: 5-15R, Pole: 2, 3-Wire, Tamper-Resistant, Duplex Receptacle/Outlet, Straight Blade, Grounding, Quickwire Push-In & Side, Standards and Certifications: UL/CSA, Warranty: 2 Year Limited, NEC compliant – Ivory

Category: Tamper Resistant Residential Grade Receptacles

(3) 10 AWG Conductors and (1) 10 AWG Ground, NM-B, Pink (Some Remaining Orange Inventory), Solid Copper Conductor, 90°C Insulation, 600V, 250 ft. Package, Non-Metallic Sheathed Cable *** There is a current initiative among manufacturers for Purple to be the default color for 10/3 NM-B instead of the traditional Yellow. As inventories adjust, customers could receive either color. ***

Category: 10 AWG NM-B

The TF65-28 thermal overload relay is an economic electromechanical protection device for the main circuit. it offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10. further features are the temperature compensation, trip contact (nc), signal contact (no), automatic- or manUAl reset selectable, trip-free mechanism, stop function and a trip indication. The overload relays are connected directly to the block contactors. single mounting kits are available as accessory.

Category: Overload Relays - Thermal Type

15 Amp, 125 Volt Receptacle, 20 Amp, 125 Volt Feed-Through, Self Testing, Tamper Resistant, SmartLock Pro Slim GFCI, Monochromatic, Back & Side Wired, Nylon Wallplate & Self Grounding Clip Included - Ivory

Category: Tamper Resistant GFCI Receptacles

The LBI junction box is used to connect LBI wiring to branch circuits. Connections are made from the LBI Junction box to the Light Bar using seamless connector or linking cable. The junction box includes an optional 120V ON/OFF switch that can be installed into a rectangular knock-out on the cover. Kit includes 1pc RP-LBI-SSC-DIM

Category: LED - Retrofit Kits/Accessories

1.0 HP @ 120V AC Switch Rating, 20 Amp 120V Feed-Through, Self Testing, Slim SmartLock PRO GFCI, Monochromatic, Blank Face, Back & Side, Self Grounding Clip Included, Buttons Match Face Color - White

Category: In-Wall - Blank GFCI

LED Retrofit w/FlexColor for Shoebox/Wallpack: 80 Watt, 10600/10700/10800 Lumens, Color Selectable Temperature: 3000K/4000K/5000K, EX39 Base. Light panel can rotate once the base is tightened to direct light out of the fixture. Enclosed fixture safe and approved for damp locations. Lamps dim to 50% by selecting “LO” on the switch located on the top of the lamp. *DLC Code: PE1R64EU.

Category: Post Top / Site / Wall Pack LED Lamps

Clamp Meter With True Rms Provides Accurate And Reliable Measurements Across Various Applications, Measures Ac/Dc Voltage, Ac/Dc Current, Resistance, Dc Micro Amps, Temperature, Diode Test, Continuity, Capacitance, Frequency/Duty Cycle, And Inrush, Transflective Reverse-Contrast Display Provides Excellent Visibility In Both Sunlight And Dark Environments, Illuminated Dial Ensures Clear Visibility And Easy Reading, Even In Low-Light Environments, Features A Low Impedance (Loz) Mode To Identify And Eliminate Ghost Voltages, Preventing False Readings And Ensuring More Accurate Measurements, Integrated Worklight Illuminates The Work Area For Improved Visibility In Dark Or Confined Spaces, Non-Contact Voltage Detection Is Integrated Into The Clamp Jaw, With Audible And Visual Indicators That Intensify As The Clamp Moves Closer To The Voltage Source, Rated Ip40 For Ingress Protection, Withstands Drops From 6.6 Feet (2 M), And Includes Right-Angle Input Test Leads, Thermocouple, Storage Pouch, Instruction Manual, And 3 X Aaa Batteries, Ergonomic Design And Overmold Provide A Comfortable Grip, With Easy Dial Adjustment Using The Thumb, Clamp Body Includes A Side-Mounted Test Lead Holder And A Back Mount That Accommodates An Optional Magnetic Hanger (Cat. Nos. 69445 Or 69417) For Hands-Free Operation

Category: AC / DC Clamp Meters

Impact Duty Driver Bits Are Engineered To Be The Most Durable, Best Fitting Driver Bits On The Market. The Optimized Shockzone Geometry is Unique For Each Tip Type To Provide Up To 30x Longer Life And Absorbs 3x More Torque Vs. Other Impact Bits. The Precise Fit Custom Machined Tip Prevents Stripping And Reduces Wobble While The Custom Alloy76 Steel And Proprietary Heat Treat Process Maximizes Resistance To Wear And Shock. Shockwave Driver Bits Are Built To Deliver Extreme Durability For The Most Demanding Applications. Bullets:designed For Use With Milwaukee Shockwave Magnetic Bit Tip Holders; Precise Fit Custom Machined Tip Prevents Stripping And Reduces Wobble; Custom Alloy76 Steel Maximizes Resistance to Wear and Shock

Category: Square Head Insert / Power Bits

15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, With Ears Duplex Receptacle, Straight Blade, Residential Grade, Grounding, All Screws Backed Out Contractor Pack, Quickwire Push-In & Side Wired, Steel Strap - White

Category: 15 Amp Residential Grade Duplex Receptacles