"b676-05-000-05 jmc steel group"

Contender Nameplate, Legend: Blank, Enclosure: NEMA 3, 7CD, 9EFG, Standard: Class I, Division 1, Groups C, D Class I, Division 2, Groups B, C, D, Class II, Division 1 And 2, Groups E, F, G, Class III, For Use On EFDB Series Pushbutton

Category: 30mm Pushbutton Legend Plates

Explosion-Proof Pushbutton Control Station; Type Feed Through; Constructional Feature Explosion-Proof, Dust-ignitionproof; Voltage Rating 600 Vac; Current Rating10 Ampere; Legend Start/stop; Number Of Elements 2; Number Of Circuits 2; Contact Configuration 2no-2nc, Momentary, Universal; Operator Type Front Operated Button; Box Type Single Gang; Hub Size (2) 3/4 Inch; Enclosure Material Zinc Electroplated Chromate Epoxy Powder Coated Malleable Iron Body/cover; Enclosure Class Idiv 1 Group C D, Class I Div 2 Group B C D, Class Ii Div 1 And 2 Group E F G, Class Iii, Nema 3/7cd/9efg; Approval Ul 508/698/1203; Application Hazardous Location

Category: Explosion-Proof Pilot Device Assembled Units

U-Line 2-Gang Receptacle With Mounting Box, Number Of Poles: 3, Number Of Wires: 2, Amperage Rating: 20 AMP, Voltage Rating: 250 VAC, Material: Copperfree (4/10 Of 1 PCT Maximum) Aluminum Receptacle, Malleable Iron Mounting Box, Nema Rating: NEMA 3, 3R, Mounting: Surface Mount With 1 IN Dead-End Hub, Motor Horsepower: 2 HP, Finish: Epoxy Powder Coat, Dimensions: 6.19 IN Width X 5.38 IN Height X 5.69 IN Depth, Standard: Class I, Division 1 And 2 Groups C, D, Class I, Division 2, Groups B, C, D, Class II, Division 1 And 2 Groups F, G, Class III, UL Listed: E10784, E81751, UL Standard: 1203, 1010, 894, CSA Standard: C22.2 No. 25, C22.2 No. 30, C22.2 No. 42, C22 No.159, CSA Certified: 038644, For ECP And NCP Mating Plugs

Category: 20 Amp Pin & Sleeve Receptacles

EFSR-GFI Series 1-Gang Ground Fault Circuit Interrupter, Voltage Rating: 125 VAC, Amperage Rating: 20 AMP, Frequency Rating: 50 - 60 HZ, Trip Type: 5 MILAMP Trip Setting, Enclosure: NEMA 3, 3R, 7BCD, 9EFG, Material: Cast Copperfree (Less Than 4/10 Of 1 PCT) Aluminum, Finish: Baked Gray Epoxy Clad, Mounting: Surface Mount With 3/4 IN Dead-End Hub, Standard: Class I, Group B, Class I, Groups C, D, Class II, Groups E, F, G, Class III, UL Listed: E81751, UL Standard: 943, 1203, For U-Line 20 AMP Receptacles

Category: Explosion-Proof Assembled Switches

Eaton group metering front cover, Front cover, 1MCB700R, 1MHCB700R, 1MCB800R, 1MHCB800R, 1MCB900R, 1MHCB900R, 1MCB1000R, 1MHCB1000R

Category: Group Metering Renewal Parts

Contender EDSC Series 1-Gang Tumbler Switch, Voltage Rating: 120 - 277 VAC, Amperage Rating: 20 AMP, Number Of Poles: 1, Actuator: Front Operated, Enclosure: NEMA 3, 7CD, 9EFG, Mounting: Surface Mount With 1 IN Feed-Thru Hub, HP Rating: 1 HP At 120 VAC, 2 HP At 240 VAC, Material: Aluminum Body, Nylon 6/6 Handle, Finish: Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat), Height: 5.31 IN, Width: 3.72 IN, Depth: 5.31 IN, Standard: UL 894, UL 1203, E10523, E81751 UL Listed, Class I, Division 1, Groups C, D, Class I, Division 2, Groups B, C, D, Class II, Division 1 And 2, Groups E, F, G, Class III, For Use In Classified Areas Where Ignitable Vapors, Gases Or Highly Combustible Dusts Are Present

Category: Explosion-Proof Assembled Switches

OZ-Gedney Type PLG Internal Recessed Threaded Insert Plug, Size: 1 IN, Copper-Free Aluminum, Connection: Threaded NPT, Body Thick: 3/4 IN, 1/2 IN Socket Size, Third Party Certification: UL File Number E-34997 Suitable For Wet Locations, UL Listed For Hazardous Location Use As Follows: Class I, Division 1, 2, Groups A, B, C, D, Class I, Zone 1, 2, Groups IIA, IIB, IIC, Class II, Division 1, 2, Groups E, F, Glass III, CSA 009795, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, For Outlet Boxes And Hubs

Category: Explosion-Proof Recessed Head Close-Up Plugs

OZ-Gedney Type EY Vertical Sealing Fitting, Size: 2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 2-3/4 IN Body Diameter X 6-1/4 IN Overall Length, 3-5/8 IN Turning Radius, 15 OZ Sealing Compound Required, 1 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, UL Listed Using O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, UL Listed For Vertical Conduit Runs In: Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 009795, CSA Certified sealing compound, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC

Category: Explosion-Proof Female Vertical Sealing Fittings

OZ-Gedney Type GUAL Conduit Outlet Box, Number Of Outlet: 2, Malleable Iron Body/Cover, Size: 1-1/2 IN, Cable Entry: (2) 1-1/2 IN Hubs, 70 CU-IN Capacity, No, 5-1/8 IN Cover Opening, Finish: Zinc Electroplated With Aluminum Enamel, 5-5/8 IN Width, 3-3/4 IN Depth, 5-5/8 IN Height, NEMA Rating: NEMA 4, 7CD, 9EFG, Third Party Certification: UL File Number E-30513, Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 020945, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 And 505, Military Specification Mil-F-28675, Federal Specification A-A-50563, For Rigid Conduit And IMC

Category: Explosion-Proof L Conduit Outlet Boxes

OZ-Gedney Type GUAX Conduit Outlet Box, Number Of Outlet: 4, Malleable Iron Body/Cover, Size: 1-1/4 IN, Cable Entry: (4) 1-1/4 IN Hubs, 30 CU-IN Capacity, No, 3-3/4 IN Cover Opening, Finish: Zinc Electroplated With Aluminum Enamel, 4-1/4 IN Width, 3 IN Depth, NEMA Rating: NEMA 4, 7CD, 9EFG, Third Party Certification: UL File Number E-30513, Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 020945, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 And 505, Military Specification Mil-F-28675, Federal Specification A-A-50563, For Rigid Conduit And IMC

Category: Explosion-Proof X Conduit Outlet Boxes

OZ-Gedney Type OELB Conduit Outlet Body, 3/4 IN Hub, Iron, Finish: Zinc Electroplated With Aluminum Enamel, Gray, Connection: Threaded, Third Party Certification: UL File Number E-30513, CSA 009795, Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, Applicable Third Party Standards: UL 886, CSA C22.2 No. 30, Federal Specification Number A-A-50563, NEC Articles 500-503 And 505, Mil. Specification: Mil-F-28675, For Rigid Conduit And IMC

Category: Explosion-Proof Type LB Conduit Bodies

Explosion-Proof Conduit Drain and Seal Fitting, Type Drain, Turning Radius 1-15/16 Inch, Trade Size 3/4 Inch, Connection Type Male, Female, Material Zinc Electroplated Chromate Epoxy Powder Coated Ductile/Malleable Iron, Mounting Position Vertical, Enclosure Class I Div 1 and 2 Group B C D, Class I Zone 1 and 2 Group IIA IIB, Class II Div 1 and 2 Group E F G, Class III, Approval UL 886, CSA C22.2, Overall Length 5-5/32 Inch, Application Seal Conduits in Vertical or Horizontal, to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames from One Portion of the Electrical System to Another Through the Conduit, Constructional Feature Explosion-Proof

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

U-Line 2-Gang Receptacle With Mounting Box, Number Of Poles: 3, Number Of Wires: 2, Amperage Rating: 20 AMP, Voltage Rating: 250 VAC, Material: Copperfree (4/10 Of 1 PCT Maximum) Aluminum Receptacle And Mounting Box, Nema Rating: NEMA 3, 3R, Mounting: Surface Mount With 3/4 IN Feed-Thru Hub, Motor Horsepower: 2 HP, Finish: Epoxy Powder Coat, Dimensions: 6.19 IN Width X 6.13 IN Height X 5.69 IN Depth, Standard: Class I, Division 1 And 2 Groups C, D, Class I, Division 2, Groups B, C, D, Class II, Division 1 And 2 Groups F, G, Class III, UL Listed: E10784, E81751, UL Standard: 1203, 1010, 894, CSA Standard: C22.2 No. 25, C22.2 No. 30, C22.2 No. 42, C22 No.159, CSA Certified: 038644, For ECP And NCP Mating Plugs

Category: Explosion-Proof Assembled Receptacles

Assembled Pushbutton, Type Extended, Series/Size Contender Series, Contact Rating 600 VAC 10 Ampere, 125 VDC 5 Ampere, Contact Configuration 1NO-1NC, Contact Type Momentary, Cap/Lens Color Black, Enclosure Class I Div 2 Group B C D, Class II Group E F G, Class III, Class I Zone 2 Group IIC, Approval UL 508/698/1203/1604, CSA C22.2, cUL, Application Hazardous Location, With (2) Labyrinth Switch

Category: 30mm Extended Pushbutton Operators

Explosion-Proof Conduit Sealing Fitting, Turning Radius 2-1/2 Inch, Trade Size 1 Inch, Connection Type Female, Female, Material Copper-Free Aluminum, Mounting Position Vertical, Enclosure Class I Div 1 and 2 Group C D, Class I Zone 1 and 2 Group IIA IIB, Class II Div 1 and 2 Group E F G, Class III, Approval UL, CSA, Overall Length 3-7/16 Inch, Application Seal Conduits in Vertical or Horizontal, to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames from One Portion of the Electrical System to Another Through the Conduit, Constructional Feature Explosion-Proof

Category: Explosion-Proof 25% Fill Male / Female Vertical Sealing Fittings

C-H 1MP2204RRLC GROUP METERIN

Category: Residential Meter Stacks

Explosion-Proof Conduit Drain and Seal Fitting, Type Drain, Turning Radius 2-1/16 Inch, Trade Size 1 Inch, Connection Type Male, Female, Material Zinc Electroplated Chromate Epoxy Powder Coated Ductile/Malleable Iron, Mounting Position Vertical, Enclosure Class I Div 1 and 2 Group B C D, Class I Zone 1 and 2 Group IIA IIB, Class II Div 1 and 2 Group E F G, Class III, Approval UL 886, CSA C22.2, Overall Length 6-1/32 Inch, Application Seal Conduits in Vertical or Horizontal, to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames from One Portion of the Electrical System to Another Through the Conduit, Constructional Feature Explosion-Proof

Category: Explosion-Proof Male / Female (Vertical / Horizontal) Sealing Fittings

Rigid Conduit Union, Type Female/Female, Material Zinc Electroplate/Chromate/Epoxy Powder Coat Malleable Iron, Trade Size 4 Inch, Diameter 6-7/16 Inch, Length 3-1/2 Inch, Approval UL 886, CSA C22.2, Applicable Standard NEC 500 to 503/505, Application Hazardous Location, Constructional Feature Explosion-Proof, Dust Ignitionproof, Enclosure Class I Div 1 2 Groups B C D, Class I Zone 1 2, Groups IIA IIB, Class II Div 1 2 Groups E F G, Class III

Category: Explosion-Proof Type UNF Unions

Compact Enclosures Wall mount, Sheet Steel, Hinged Cover 12x16x6

Category: NEMA 4 Wall Mount Enclosures

RadioRA 2 Dual-Group with Dual Raise/Lower Keypad Neutral-Wire Dimmer, 450W/450VA Incandescent/Halogen/Magnetic Low-Voltage or 100W Approved CFL/LED 120V, Brown

Category: RadioRA Keypads & Sensors

RadioRA 2 Dual-Group with Dual Raise/Lower Keypad Neutral-Wire Dimmer, 450W/450VA Incandescent/Halogen/Magnetic Low-Voltage or 100W Approved CFL/LED 120V, Taupe

Category: RadioRA Keypads & Sensors

Breaker, Molded Case, CV Series, 2-Pole, 200 Amp, 240 Volt AC, 65 kAIC. Includes: Mounting Kit.

Category: 240-277V Rated Molded Case Circuit Breakers

Efsr-gfi Series 1-gang Ground Fault Circuit Interrupter, Voltage Rating: 125 Vac, Amperage Rating: 20 Amp, Frequency Rating: 50 - 60 Hz, Trip Type: 5 Milamp Trip Setting, Enclosure: Nema 3, 3r, 7bcd, 9efg, Material: Malleable Iron, Mounting: Surface Mount With 1 In Feed-thru Hub, Standard: Class I, Group B, Class I, Groups C, D, Class Ii, Groups E, F, G, Class Iii, Ul Listed: E81751, Ul Standard:943, 1203, For U-line 20 Amp Receptacles

Category: 20 Amp Pin & Sleeve Receptacles

U-Line 2-Gang Receptacle With Mounting Box, Number Of Poles: 3, Number Of Wires: 2, Amperage Rating: 20 AMP, Voltage Rating: 250 VAC, Material: Malleable Iron Receptacle And Mounting Box, Nema Rating: NEMA 3, 3R, Mounting: Surface Mount With 1/2 IN Dead-End Hub, Motor Horsepower: 2 HP, Finish: Epoxy Powder Coat, Dimensions: 6.19 IN Width X 5.38 IN Height X 5.69 IN Depth, Standard: Class I, Division 1 And 2 Groups C, D, Class I, Division 2, Groups B, C, D, Class II, Division 1 And 2 Groups F, G, Class III, UL Listed: E10784, E81751, UL Standard: 1203, 1010, 894, CSA Standard: C22.2 No. 25, C22.2 No. 30, C22.2 No. 42, C22 No.159, CSA Certified: 038644, For CPH And ECP Mating Plugs

Category: 20 Amp Pin & Sleeve Receptacles